| Black Clip Enable | ||
|---|---|---|
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/Clipping | |
| Function: | Controls the activation of the Black Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the Black Clip Enable option is set to ON, all luminance levels below black set by the Black Clip Level are clipped. When set to NO, all luminance video levels below black are passed without clipping. | |
| Black Clip Level | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/Clipping | |
| Function: | Sets the Black Clip level. | |
| Valid Range: | -6.8 IRE to +6.8 IRE (for 525) -47.9 mV to +47.9 mV (for 625) |
|
| Default Setting: | 0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined black luminance video clipping level. The Chrominance video level is unaffected. | |
| White Clip Enable | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/Clipping | |
| Function: | Controls the activation of the White Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the White Clip Enable option is set to ON, all luminance levels above white set by the White Clip Level are clipped. When set to NO, all luminance video levels above white are passed without clipping. | |
| White Clip Level | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/Clipping | |
| Function: | Sets the White Clip level. | |
| Valid Range: | +90.0 IRE to +109.0 IRE (for 525) +636.8 mV to +763.1 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined white luminance video clipping level. The Chrominance video level is unaffected. | |
| Fld1 Line 6 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 7 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 8 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 9 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Comb (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 23 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Comb (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 6 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 7 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 8 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 9 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Comb (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 23 | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Comb, Notch, Bypass to Y, Blank | |
| Default Setting: | Comb (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Black Level | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the black level of the Analog video input. | |
| Valid Range: | -15.0 IRE to +15.0 IRE (for 525) -100.0 mV to +100.0 mV (for 625) |
|
| Default Setting: | +0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | This control defines the darkest level of the picture contents. Increase or descrese in black level effects the brightness of the picture. | |
| Luma Gain | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the Luminance gain of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the luminance (black and white) portion of a video signal and varying level effects the contrast of the picture. | |
| Chroma Gain | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the Chrominance gain of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the chrominace (color) portion of a video signal and varying level effects the intensity of the color of the picture. | |
| Hue Phase | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the Chrominance phase of the Analog video input. | |
| Valid Range: | -180.00� to +179.94� (for 525) -90.00� to +90.00� (for 625) |
|
| Default Setting: | 0.00� | |
| Description: | Hue is completely separate from the intensity or the saturation of the color and often used synonymously with the term tint. The varying in level actually changes the color of the video. | |
| Cb Gain | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the Gain of the digitized Cb channel of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cb channel of the color difference signal and when viewed on a vectorscope, it varies the horizontal axis gain. | |
| Cr Gain | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the Gain of the digitized Cr channel of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cr channel of the color difference signal and when viewed on a vectorscope, it varies the vertical axis gain. | |
| Cb Offset | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the DC Offset of the digitized Cb channel of the Analog video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cb channel and when viewed on a vectorscope, it shifts the color components of the horizontal axis. | |
| Cr Offset | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the DC Offset of the digitized Cr channel of the Analog video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cr channel and when viewed on a vectorscope, it shifts the color components of the vertical axis. | |
| Chroma Kill | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Removes chrominance information from Analog video input. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Frame Comb | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Controls the activation of frame combing. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| Description: | When activated, the combing algorithm analyzes the video content frame-by-frame and determines whether to perform the frame combing. If the frame combing is not possible, then the algorithm automatically disables the frame combing. This combing option is best suited for the static images. | |
| Field Comb | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Controls the activation of field combing. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| Description: | When activated, the combing algorithm analyzes the video content field-by-field and determines whether to perform the field combing. If the field combing is not possible, then the algorithm automatically disables the field combing. This combing option is best suited for the news coverage. | |
| Line Comb | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Controls the activation of line combing. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| Description: | When activated, the combing algorithm analyzes the video content line-by-line and determines whether to perform the line combing. If the line combing is not possible, then the algorithm automatically disables the line combing. This combing option is best suited for the fast moving video such as sports. | |
| Notch Filter | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Controls the activation of notch combing. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled and all temporal and spatial combing fail, then the notch filter is used to eliminate chrominance (color) information from the luminance (brightness) information in a composite video signal. | |
| Decoder Lock Mode | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Selects the locking source for the input clock generation circuitry. | |
| Valid Settings: | Auto, Sync, Burst | |
| Default Setting: | Auto | |
| Description: | The analog input clock circuitry can be locked to either Sync or Burst from the input video signal. The Auto setting chooses the Burst signal as the first locking source for the input clock generation but if it is missing or the frequency is beyond the locking range, then the logic switches to the Sync signal as the locking reference source. The Burst locking option is preferred as it provides a more reliable and stable locking. | |
| CAV-Y Composite | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Enables the use of the component analog video input's Y input as a second composite input source, instead of for component video. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Description: | When this option is enabled, the CAV-Y In connection on the rear of the unit functions as a second composite video input. This input is then selected as CAV from the front-panel controls or Component from the Input Source option of the Video Setup menu. When this option is disabled, the CAV-Y In connection functions as normal, as the luminance input for component video input. Note that the unit will have been calibrated based on the CAV-Y In connection being used for component analog video. If the connection is to be used for composite video, a minor adjustment of trimpot IRV2 (CAV-Y) may optionally be desired to attain perfect video level match between inputs. | |
| Input H-Position | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Adjusts the horizontal position of the picture. | |
| Valid Range: | -69.271 ns to 68.729 ns (for 525) -56.220 ns to 55.780 ns (for 625) |
|
| Default Setting: | 0 ns | |
| Hanover Bar Suppress | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Controls the activation of the Hanover Bar Suppression. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | This control is only active for PAL input signal. The appearance of coloured bars at line frequency is visible if there are phase or differential phase errors. When the Hanover Bars Supression is enabled, the HUE adjustment will affect the amplitude of the color difference signals. | |
| Cable Eq. Length | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Defines the length of input cable. | |
| Valid Range: | 0 m to 300 m | |
| Default Setting: | 0 m | |
| Cable Eq. Enable | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Activates the input cable equalization. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SETUP Line Select | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Selects a starting line for the removal of the SETUP (7.5 IRE pedestal) signal. | |
| Valid Range: | 10 to 25 | |
| Default Setting: | 22 | |
| Description: | This control is only applicable to 525 line analog signals and affects only the VBI (Vertical Blanking Interval) lines. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows the user to specify where to remove the SETUP (7.5 IRE pedestal) signal from the VBI lines to properly reconstruct the VBI blanking level. | |
| SETUP I/P Level | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal from all active video lines. | |
| Valid Settings: | With, Without | |
| Default Setting: | With (for 525) Without (for 625) |
|
| Description: | This control is only applicable to 525 line analog signals and affects only the active video lines. The SETUP (7.5 IRE pedestal) level is not applicable in D1 video domain therefore, if the input video contains the SETUP signal, it should be removed at the D1 output stage. In North America, most of analog video signals contain the SETUP signal so setting this option to With will remove the 7.5 IRE pedestal and rescale the D1 output video. Few Asian countries use the No SETUP standard where the video swings up from 0 IRE therefore Without is the recommended setting. | |
| TBC Mode | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Specifies whether or not the analog input signal is to be time base corrected by the unit's TBC circuitry. | |
| Valid Settings: | Auto, On, Off | |
| Default Setting: | Auto | |
| Description: | In Auto-Switch mode, the unit will sense the incoming composite video signal and automatically switches in and out of the TBC circuitry. The TBC is always used for S-Video input, independent of this setting. In Off mode, the internal TBC is not active, and the TBC indicator on the front of the unit will be off. The composite input must be a stable, RS-170A signal (such as a satellite or live camera feed). In On mode, generally for heterodyned signals from sources such as a VTR, the unit will time base correct the composite input signal. The TBC indicator on the front of the unit will be on. When the input video goes through the TBC path, the video quality degradation is inevitable. | |
| TBC Delay | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Proc | |
| Function: | Specifies the TBC auto-switching delay interval. | |
| Valid Range: | 0.1 s to 5.0 s | |
| Default Setting: | 0.5 s | |
| Analog In Std FB (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Reports the detected composite input video standard. | |
| Default Setting: | N/A | |
| I/P Video Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the presence of the analog input video signal. | |
| Default Setting: | No | |
| I/P Burst Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the presence of the burst signal from the analog input video signal. | |
| Default Setting: | N/A | |
| I/P Locked (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the locked status of the analog input video signal. | |
| Default Setting: | N/A | |
| I/P Noise Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the presence of noise at analog input video signal when above set threshold level. | |
| Default Setting: | N/A | |
| I/P SCH Err Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the detected subcarrier/horizontal phase relationship from the analog input video signal. | |
| Default Setting: | N/A | |
| Description: | Indicates when the selected Composite video source's SC/H error is greater than +/-45 degrees. | |
| I/P Frozen (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the video frozen status. | |
| Default Setting: | No | |
| Description: | The video contents are evaluated both spatially and temporally to determine whether the input video source is a frozen. As long as the motion is detected from the input video, the alarm is not asserted. The static test signal will generate the video frozen alarm. | |
| TBC Active (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Returns the status of TBC activation. | |
| Default Setting: | No | |
| Description: | Indicates when the TBC function is active and the front panel LED illuminates accordingly. | |
| Low Video Detected (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Indicates when the input video signal falls below the defined threshold level. | |
| Default Setting: | N/A | |
| Description: | When the analog input video level is below the level set by the "Low Video Thresh" parameter in the Alarm Assert Setup menu, the Low Video Detected alarm is asserted. | |
| Peak White Detected (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Indicates when the input luminance signal exceeds the defined threshold level. | |
| Default Setting: | N/A | |
| Description: | When the analog input video's peak white level is above the level set by the "Peak White Thresh" parameter in the Alarm Assert Setup menu, the Peak White Detected alarm is asserted. | |
| Peak Chroma Detected (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/Status | |
| Function: | Indicates when the input chrominance signal exceeds the defined threshold level. | |
| Default Setting: | N/A | |
| Description: | When the analog input video's peak chroma level is above the level set by the "Peak Chroma Thresh" parameter in the Alarm Assert Setup menu, the Peak Chroma Detected alarm is asserted. | |
| Vertical Phase | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Adjusts the vertical phase of the analog frame sync. | |
| Valid Range: | 0 lines to 524 lines (for 525) 0 lines to 624 lines (for 625) |
|
| Default Setting: | 0 lines | |
| Horizontal Phase | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Adjusts the horizontal phase of the analog frame sync. | |
| Valid Range: | 0.00 us to 63.52 us (for 525) 0.00 uS to 63.96 us (for 625) |
|
| Default Setting: | 0.00 us | |
| LOV Mode | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Selects the output behavior mode when it detects loss of input video. | |
| Valid Settings: | Pass, Freeze, Black | |
| Default Setting: | Freeze | |
| Description: | Sets the output behavior in the event of Loss of Input Video. When set to Black or Freeze, the output video sends out either black or last good frozen image respectively. If set to Pass, the converted input video is sent out straight thru. This setting may affect the downstreaming units as any input disturbances to X75 unit is passed straight thru the output. | |
| Freeze Mode | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Selects a type of frozen output video. | |
| Valid Settings: | Field1, Field2, Frame | |
| Default Setting: | Field1 | |
| Description: | This setting instructs the Frame Synchronizer's memory device to grab which portion of the video (Field1, Field2, Frame) and send to outputs in the event of loss of input video or a user forces the freeze action. | |
| Force Freeze | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Forces output video to freeze. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Force Black | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Forces output video to black. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| AVFS FS I/O Updates | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Enables Frame Synchronizer updates propagation delay updates. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AVFS I/O Delay (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (A3D)/AVFS & Timing | |
| Function: | Reports the propagation video delay thru the analog Frame Synchronizer. | |
| Default Setting: | 0.000 ms | |
| Analog Video Source | ||
| Navigation Path: | /Video Setup/Analog Input (A3D) | |
| Function: | Selects the analog input video source. | |
| Valid Settings: | Composite, S-Video, CAV | |
| Default Setting: | Composite | |
| Description: | The analog video input module contains the ProcAmp and a single Frame Synchronizer. Only a single video source (Composite, S-Video, CAV) can be selected and processed. | |
| Composite In Std Set | ||
| Navigation Path: | /Video Setup/Analog Input (A3D) | |
| Function: | Sets the operational standard for the Composite video input. | |
| Valid Settings: | NTSC, PAL-M, PAL-B, SECAM | |
| Default Setting: | NTSC (for 525) PAL-B (for 625) |
|
| Black Clip Enable | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/Clipping | |
| Function: | Controls the activation of the Black Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the Black Clip Enable option is set to ON, all luminance levels below black set by the Black Clip Level are clipped. When set to NO, all luminance video levels below black are passed without clipping. | |
| Black Clip Level | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/Clipping | |
| Function: | Sets the Black Clip level. | |
| Valid Range: | -6.8 IRE to +6.8 IRE (for 525) -47.9 mV to +47.9 mV (for 625) |
|
| Default Setting: | 0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined black luminance video clipping level. The Chrominance video level is unaffected. | |
| White Clip Enable | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/Clipping | |
| Function: | Controls the activation of the White Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the White Clip Enable option is set to ON, all luminance levels above white set by the White Clip Level are clipped. When set to NO, all luminance video levels above white are passed without clipping. | |
| White Clip Level | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/Clipping | |
| Function: | Sets the White Clip level. | |
| Valid Range: | +90.0 IRE to +109.0 IRE (for 525) +636.8 mV to +763.1 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined white luminance video clipping level. The Chrominance video level is unaffected. | |
| Fld1 Line 6 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 7 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 8 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 9 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Comb (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld1 Line 23 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld1 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Comb (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 6 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 7 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 8 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 9 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Blank | |
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Bypass to Y (for 525) Blank (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Comb (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| Fld2 Line 23 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI Combing - Fld2 | |
| Function: | Controls VBI (Vertical Blanking Interval) processing options for this line. | |
| Valid Settings: | Bypass to Y, Blank, Notch, Comb | |
| Default Setting: | Comb (for 525) Bypass to Y (for 625) |
|
| Description: | The VBI (Vertical Blanking Interval) Combing control allows user to custom configure/process the VBI lines line-by-line basis. When a line is set to Comb, the same active lines' combing algorithm is applied to the selected VBI line. When a line is set to Notch, the selected VBI line will be sampled from the input video and then passed through a simple notch filter. When a line is set to Bypass to Y, the selected VBI line is sampled and passed through the Y channel to prevent the video data from corrupting. When a line is set to Blank, the selected VBI line is blanked out completely resulting a black signal. | |
| VBI Lines In SETUP | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal from all Vertical Blanking Interval lines in field 1. | |
| Valid Settings: | Line-By-Line, All-Without, All-With | |
| Default Setting: | Line-By-Line | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows global removal of the SETUP level in all field 1 VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld1 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld1 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | With | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| VBI Lines In SETUP | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal from all Vertical Blanking Interval lines in field 2. | |
| Valid Settings: | Line-By-Line, All-Without, All-With | |
| Default Setting: | Line-By-Line | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows global removal of the SETUP level in all field 2 VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | Without | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Fld2 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc/VBI SETUP - Fld2 | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal. | |
| Valid Settings: | With, Without | |
| Default Setting: | With | |
| Description: | This control is not applicable to 625 standard signals. Typically, the VBI lines should not contain the SETUP signal but some source signals may contain it erroneously. This control allows line-by-line removal of the SETUP signal in the VBI lines to properly reconstruct the VBI blanking level. | |
| Black Level | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the video gain of the Analog video input. | |
| Valid Range: | -15.0 IRE to +15.0 IRE (for 525) -100.0 mV to +100.0 mV (for 625) |
|
| Default Setting: | +0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | This control defines the darkest level of the picture contents hence increase in black level effects the brightness of the picture. | |
| Luma Gain | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the Luminance gain of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the luminance (black and white) portion of a video signal and varying level effects the contrast of the picture. | |
| Chroma Gain | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the Chrominance gain of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the chrominace (color) portion of a video signal and varying level effects the intensity of the color of the picture. | |
| Hue Phase | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the Chrominance phase of the Analog video input. | |
| Valid Range: | -180.00� to +179.83� (for 525) -90.00� to +89.81� (for 625) |
|
| Default Setting: | 0.00� | |
| Description: | Hue is completely separate from the intensity or the saturation of the color and often used synonymously with the term tint. The varying in level actually changes the color of the video. | |
| Cb Gain | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the Gain of the digitized Cb channel of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cb channel of the color difference signal and when viewed on a vectorscope, it varies the horizontal axis gain. | |
| Cr Gain | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the Gain of the digitized Cr channel of the Analog video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cr channel of the color difference signal and when viewed on a vectorscope, it varies the vertical axis gain. | |
| Cb Offset | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the DC Offset of the digitized Cb channel of the Analog video input. | |
| Valid Range: | 0.0 % to +99.6 % | |
| Default Setting: | 50.0 % | |
| Description: | It controls the color balance of the Cb channel and when viewed on a vectorscope, it shifts the color components of the horizontal axis. | |
| Cr Offset | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the DC Offset of the digitized Cr channel of the Analog video input. | |
| Valid Range: | 0.0 % to +99.6 % | |
| Default Setting: | 50.0 % | |
| Description: | It controls the color balance of the Cr channel and when viewed on a vectorscope, it shifts the color components of the vertical axis. | |
| Chroma Kill | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Removes chrominance information from Analog video input. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| 3D Comb Decoder | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Configures the operation adaptive 3-dimensional comb filter decoder. | |
| Valid Settings: | Disable, Luma, Chroma, Both Y+C | |
| Default Setting: | Luma | |
| Description: | This option selects between adaptive 2D and adaptive 3D combing, whether to comb luminance, chroma, or both. 3D combing combines information from previous frames in order to cancel eliminate residual subcarrier artifacts such as cross luminance and cross chroma. | |
| 3D Chroma Mtn Bias | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Adjusts the algorithm of the adaptive 3D comb decoder to compensate for high-motion, color-intensive footage. | |
| Valid Settings: | Low, Normal, High, Extreme | |
| Default Setting: | Normal (for 525) Low (for 625) |
|
| Description: | The Normal setting should be ideal for most applications. If chroma lag is visible in footage that contains color-intensive, high-speed motion, the Low setting should be used. The High and Extreme settings may be useful when processing images with little or no motion, to provide the highest level of cross-color reduction . | |
| CAV-Y Composite | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Enables the use of the component analog video input's Y input as a second composite input source, instead of for component video. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Description: | When this option is enabled, the CAV-Y In connection on the rear of the unit functions as a second composite video input. This input is then selected as CAV from the front-panel controls or Component from the Input Source option of the Video Setup menu. When this option is disabled, the CAV-Y In connection functions as normal, as the luminance input for component video input. Note that the unit will have been calibrated based on the CAV-Y In connection being used for component analog video. If the connection is to be used for composite video, a minor adjustment of trimpot IRV2 (CAV-Y) may optionally be desired to attain perfect video level match between inputs. | |
| Chroma Decoder | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Selects the mode of the comb filter decoder, between notch filtering and adaptive combing. | |
| Valid Settings: | 2D Adaptive, Notch | |
| Default Setting: | Adaptive | |
| Description: | The 3D Comb Decoder option detailed earlier in this section specifies whether adaptive combing will be 2D or 3D. | |
| Chroma Bandpass | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Enables the narrow bandpass chroma filter. | |
| Valid Settings: | Normal, Narrow Bandpass | |
| Default Setting: | Normal | |
| SETUP I/P Level | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Allows the option to remove the SETUP (7.5 IRE pedestal) signal from all active video lines. | |
| Valid Settings: | With, Without | |
| Default Setting: | With (for 525) Without (for 625) |
|
| Description: | This control is only applicable to 525 line analog signals and affects only the active video lines. The SETUP (7.5 IRE pedestal) level is not applicable in D1 video domain therefore, if the input video contains the SETUP signal, it should be removed at the D1 output stage. In North America, most of analog video signals contain the SETUP signal so setting this option to With will remove the 7.5 IRE pedestal and rescale the D1 output video. Few Asian countries use the No SETUP standard where the video swings up from 0 IRE therefore Without is the recommended setting. | |
| TBC Mode | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Specifies whether or not the analog input signal is to be time base corrected by the unit's TBC circuitry. | |
| Valid Settings: | Auto, On, Off | |
| Default Setting: | Auto | |
| Description: | In Auto-Switch mode, the unit will sense the incoming composite video signal and automatically switches in and out of the TBC circuitry. The TBC is always used for S-Video input, independent of this setting. In Off mode, the internal TBC is not active, and the TBC indicator on the front of the unit will be off. The composite input must be a stable, RS-170A signal (such as a satellite or live camera feed). In On mode, generally for heterodyned signals from sources such as a VTR, the unit will time base correct the composite input signal. The TBC indicator on the front of the unit will be on. When the input video goes through the TBC path, the video quality degradation is inevitable. | |
| TBC Delay | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Proc | |
| Function: | Specifies the TBC auto-switching delay interval. | |
| Valid Range: | 0.1 s to 5.0 s | |
| Default Setting: | 0.5 s | |
| Vertical Phase | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Adjusts the vertical phase of the analog frame sync. | |
| Valid Range: | 0 lines to 524 lines (for 525) 0 lines to 624 lines (for 625) |
|
| Default Setting: | 0 lines | |
| Horizontal Phase | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Adjusts the horizontal phase of the analog frame sync. | |
| Valid Range: | 0.00 us to 63.52 us (for 525) 0.00 uS to 63.96 us (for 625) |
|
| Default Setting: | 0.00 us | |
| LOV Mode | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Selects the output behavior mode when it detects loss of input video. | |
| Valid Settings: | Pass, Freeze, Black | |
| Default Setting: | Freeze | |
| Description: | Sets the output behavior in the event of Loss of Input Video. When set to Black or Freeze, the output video sends out either black or last good frozen image respectively. If set to Pass, the converted input video is sent out straight thru. This setting may affect the downstreaming units as any input disturbances to X75 unit is passed straight thru the output. | |
| Freeze Mode | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Selects a type of frozen output video. | |
| Valid Settings: | Field1, Field2, Frame | |
| Default Setting: | Field1 | |
| Description: | This setting instructs the Frame Synchronizer's memory device to grab which portion of the video (Field1, Field2, Frame) and send to outputs in the event of loss of input video or a user forces the freeze action. | |
| Force Freeze | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Forces output video to freeze. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Force Black | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Forces output video to black. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| AVFS FS I/O Updates | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Enables Frame Synchronizer updates propagation delay updates. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AVFS I/O Delay (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/AVFS & Timing | |
| Function: | Reports the propagation video delay thru the analog Frame Synchronizer. | |
| Default Setting: | 0.000 ms | |
| Analog In Std FB (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Reports the detected composite input video standard. | |
| Default Setting: | N/A | |
| I/P Video Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Returns the presence of the analog input video signal. | |
| Default Setting: | No | |
| I/P Burst Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Returns the presence of the burst signal from the analog input video signal. | |
| Default Setting: | No | |
| I/P Locked (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Returns the locked status of the analog input video signal. | |
| Default Setting: | No | |
| I/P SCH Err Present (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Returns the detected subcarrier/horizontal phase relationship from the analog input video signal. | |
| Default Setting: | No | |
| Description: | Indicates when the selected Composite video source's SC/H error is greater than +/-45 degrees. | |
| I/P Frozen (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Returns the video frozen status. | |
| Default Setting: | No | |
| Description: | The video contents are evaluated both spatially and temporally to determine whether the input video source is a frozen. As long as the motion is detected from the input video, the alarm is not asserted. The static test signal will generate the video frozen alarm. | |
| TBC Active (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Returns the status of TBC activation. | |
| Default Setting: | No | |
| Description: | Indicates when the TBC function is active and the front panel LED illuminates accordingly. | |
| Low Video Detected (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Indicates when the input video signal falls below the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the analog input video level is below the level set by the "Low Video Thresh" parameter in the Alarm Assert Setup menu, the Low Video Detected alarm is asserted. | |
| Peak White Detected (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Indicates when the input luminance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the analog input video's peak white level is above the level set by the "Peak White Thresh" parameter in the Alarm Assert Setup menu, the Peak White Detected alarm is asserted. | |
| Peak Chroma Detected (Read Only) | ||
| Navigation Path: | /Video Setup/Analog Input (PQM)/Status | |
| Function: | Indicates when the input chrominance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the analog input video's peak chroma level is above the level set by the "Peak Chroma Thresh" parameter in the Alarm Assert Setup menu, the Peak Chroma Detected alarm is asserted. | |
| Analog Video Source | ||
| Navigation Path: | /Video Setup/Analog Input (PQM) | |
| Function: | Selects the analog input video source. | |
| Valid Settings: | Composite, S-Video, CAV | |
| Default Setting: | Composite | |
| Description: | The analog video input module contains the ProcAmp and a single Frame Synchronizer. Only a single video source (Composite, S-Video, CAV) can be selected and processed. | |
| Analog In Std Set | ||
| Navigation Path: | /Video Setup/Analog Input (PQM) | |
| Function: | Sets the operational standard for the analog video input. | |
| Valid Settings: | NTSC, PAL-M, PAL-B, SECAM | |
| Default Setting: | NTSC (for 525) PAL-B (for 625) |
|
| SD1 Blk Clip Enable | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc/Clipping | |
| Function: | Controls the activation of the Black Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the SD1 Black Clip Enable option is set to ON, all luminance levels below black (digital value of 64) set by the SD1 Black Clip Level are clipped. When set to NO, all luminance video levels below black are passed without clipping. | |
| SD1 Blk Clip Level | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc/Clipping | |
| Function: | Sets the black clip level. | |
| Valid Range: | -6.8 IRE to +6.8 IRE (for 525) -47.9 mV to +47.9 mV (for 625) |
|
| Default Setting: | 0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined black luminance video clipping level. The Chrominance video level is unaffected. | |
| SD1 Wht Clip Enable | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc/Clipping | |
| Function: | Controls the activation of the White Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the SD1 White Clip Enable option is set to ON, all luminance levels above white (digital value of 940) set by the SD1 White Clip Level are clipped. When set to NO, all luminance video levels above white are passed without clipping. | |
| SD1 Wht Clip Level | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc/Clipping | |
| Function: | Sets the white clip level. | |
| Valid Range: | +90.0 IRE to +109.0 IRE (for 525) +636.8 mV to +763.1 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined white luminance video clipping level. The Chrominance video level is unaffected. | |
| SD1 Black Level | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the black level of the SD1 video input. | |
| Valid Range: | -15.0 IRE to +15.0 IRE (for 525) -100.0 mV to +100.0 mV (for 625) |
|
| Default Setting: | +0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | This control defines the darkest level of the picture contents. Increase or descrese in black level effects the brightness of the picture. | |
| SD1 Luma Gain | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Luminance gain of the SD1 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the luminance (black and white) portion of a video signal and varying level effects the contrast of the picture. | |
| SD1 Chroma Gain | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Chrominance gain of the SD1 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the chrominace (color) portion of a video signal and varying level effects the intensity of the color of the picture. | |
| SD1 Hue Phase | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Chrominance phase of the SD1 video input. | |
| Valid Range: | -180.00� to +179.94� (for 525) -90.00� to +90.00� (for 625) |
|
| Default Setting: | 0.00� | |
| Description: | Hue is completely separate from the intensity or the saturation of the color and often used synonymously with the term tint. The varying in level actually changes the color of the video. | |
| SD1 Cb Gain | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Cb channel gain of the SD1 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cb channel of the color difference signal and when viewed on a vectorscope, it varies the horizontal axis gain. | |
| SD1 Cr Gain | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Cr channel gain of the SD1 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cr channel of the color difference signal and when viewed on a vectorscope, it varies the vertical axis gain. | |
| SD1 Cb Offset | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Cb channel offset of the SD1 video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cb channel and when viewed on a vectorscope, it shifts the color components of the horizontal axis. | |
| SD1 Cr Offset | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Adjusts the Cr channel offset of the SD1 video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cr channel and when viewed on a vectorscope, it shifts the color components of the vertical axis. | |
| SD1 Chroma Kill | ||
| Navigation Path: | /Video Setup/SD1 Input/Proc | |
| Function: | Removes chrominance information from SD1 video input. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD1 Vertical Phase | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Adjusts the vertical phase of the SD1 frame sync. | |
| Valid Range: | 0 lines to 524 lines (for 525) 0 lines to 624 lines (for 625) |
|
| Default Setting: | 0 lines | |
| SD1 Horizontal Phase | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Adjusts the horizontal phase of the SD1 frame sync. | |
| Valid Range: | 0.00 us to 63.52 us (for 525) 0.00 uS to 63.96 us (for 625) |
|
| Default Setting: | 0.00 us | |
| SD1 LOV Mode | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Selects the output behavior mode when it detects loss of input video. | |
| Valid Settings: | Black, Freeze, Delayed Pass, Pass | |
| Default Setting: | Freeze | |
| Description: | Sets the output behavior in the event of Loss of Input Video. When set to Black or Freeze, the output video sends out either black or last good frozen image respectively. The Delayed Pass will freeze the video for about a second then pass the video to output. The Pass option will not freeze the output video so the converted input is sent to outputs straight thru. The Pass settings may affect the downstreaming units as any input disturbances to X75 unit is passed straight thru the output. | |
| SD1 Force Freeze | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Forces output video to freeze. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD1 Freeze Mode | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Selects a type of frozen output video. | |
| Valid Settings: | Field1, Field2, Frame | |
| Default Setting: | Field1 | |
| SD1 Force Black | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Forces output video to black. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD1 FS I/O Updates | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Enables Frame Synchronizer updates propagation delay updates. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD1 FS I/O Delay (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/SD1 FS & Timing | |
| Function: | Reports the propagation video delay thru the SD1 Frame Synchronizer. | |
| Default Setting: | 0.000 ms | |
| SD1 EDH Detect En | ||
| Navigation Path: | /Video Setup/SD1 Input/EDH | |
| Function: | Enables/disables EDH detection for SD1 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Description: | The use of EDH (Error detection and handling) testing techniques, proposed SMPTE RP 165 document, can recognize the inaccuracies in serial digital television installations. | |
| SD1 EDH Present (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/EDH | |
| Function: | Returns the presence of the EDH signal. | |
| Default Setting: | No | |
| Description: | Digital data packets containing the calculated checkwords, error information flags, and identification number are located in the ancillary data area of the vertical interval in a manner to complement the recommended practice of 525 and 625 sources. When X75 detects a presence of EDH signal from the selected SD-SDI input, it illuminates the EDH led on the front panel. | |
| SD1 EDH Error Count (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/EDH | |
| Function: | Reports the detected EDH error count. | |
| Default Setting: | 0 | |
| Description: | An error is defined as one or more data bits whose digital value is different at the destination from what it was at the source. Such errors may be caused by faulty equipment, bad joints or, more probably, by excessive cable lengths. FF is a CRC calculated for an entire field of the video signal, including the horizontal and vertical blanking intervals. AP is a CRC calculated in the active picture and does not include blanking. Errors in this region are considered more severe because they are visible in the video signal. ANC is a checksum calculated for any ancillary information in the digital video signal. Errors in the active picture will cause flags to be raised for both the FF and AP regions. Errors in the blanking intervals but not the ancillary data regions will cause flags to be raised for the FF region. Errors in the ancillary data will cause flags to be raised in the ANC and FF regions. | |
| SD1 EDH Error Clear | ||
| Navigation Path: | /Video Setup/SD1 Input/EDH | |
| Function: | Clears the EDH error counter. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SD1 I/P Standard FB (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Returns the detected SD1 input standard. | |
| Default Setting: | N/A | |
| SD1 I/P Present (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Returns the presence of the SD1 input signal. | |
| Default Setting: | No | |
| SD1 I/P Locked (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Returns the locked status of the SD1 input signal. | |
| Default Setting: | No | |
| SD1 I/P Frozen (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Returns the video frozen status. | |
| Default Setting: | No | |
| Description: | The video contents are evaluated both spatially and temporally to determine whether the input video source is a frozen. As long as the motion is detected from the input video, the alarm is not asserted. The static test signal will generate the video frozen alarm. | |
| SD1 LowVideoDetected (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Indicates when the input video signal falls below the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the SD1 input video level is below the level set by the "Low Video Thresh" parameter in the Alarm Assert Setup menu, the Low Video Detected alarm is asserted. | |
| SD1 PkWhiteDetected (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Indicates when the input luminance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the SD1 input video's peak white level is above the level set by the "Peak White Thresh" parameter in the Alarm Assert Setup menu, the Peak White Detected alarm is asserted. | |
| SD1 PkChromaDetected (Read Only) | ||
| Navigation Path: | /Video Setup/SD1 Input/Status | |
| Function: | Indicates when the input chrominance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the SD1 input video's peak chroma level is above the level set by the "Peak Chroma Thresh" parameter in the Alarm Assert Setup menu, the Peak Chroma Detected alarm is asserted. | |
| SD1 Bypass | ||
| Navigation Path: | /Video Setup/SD1 Input | |
| Function: | Triggers the SD1 path Bypass Relay. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD2 Blk Clip Enable | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc/Clipping | |
| Function: | Controls the activation of the Black Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the SD2 Black Clip Enable option is set to ON, all luminance levels below black (digital value of 64) set by the SD2 Black Clip Level are clipped. When set to NO, all luminance video levels below black are passed without clipping. | |
| SD2 Blk Clip Level | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc/Clipping | |
| Function: | Sets the black clip level. | |
| Valid Range: | -6.8 IRE to +6.8 IRE (for 525) -47.9 mV to +47.9 mV (for 625) |
|
| Default Setting: | 0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined black luminance video clipping level. The Chrominance video level is unaffected. | |
| SD2 Wht Clip Enable | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc/Clipping | |
| Function: | Controls the activation of the White Clip control. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the SD2 White Clip Enable option is set to ON, all luminance levels above white (digital value of 940) set by the SD2 White Clip Level are clipped. When set to NO, all luminance video levels above white are passed without clipping. | |
| SD2 Wht Clip Level | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc/Clipping | |
| Function: | Sets the white clip level. | |
| Valid Range: | +90.0 IRE to +109.0 IRE (for 525) +636.8 mV to +763.1 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined white luminance video clipping level. The Chrominance video level is unaffected. | |
| SD2 Black Level | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the black level of the SD2 video input. | |
| Valid Range: | -15.0 IRE to +15.0 IRE (for 525) -100.0 mV to +100.0 mV (for 625) |
|
| Default Setting: | +0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | This control defines the darkest level of the picture contents. Increase or descrese in black level effects the brightness of the picture. | |
| SD2 Luma Gain | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the luminance gain of the SD2 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the luminance (black and white) portion of a video signal and varying level effects the contrast of the picture. | |
| SD2 Chroma Gain | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the chrominance gain of the SD2 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the chrominace (color) portion of a video signal and varying level effects the intensity of the color of the picture. | |
| SD2 Hue Phase | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the chrominance phase of the SD2 video input. | |
| Valid Range: | -180.00� to +179.94� (for 525) -90.00� to +90.00� (for 625) |
|
| Default Setting: | 0.00� | |
| Description: | Hue is completely separate from the intensity or the saturation of the color and often used synonymously with the term tint. The varying in level actually changes the color of the video. | |
| SD2 Cb Gain | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the Cb channel gain of the SD2 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cb channel of the color difference signal and when viewed on a vectorscope, it varies the horizontal axis gain. | |
| SD2 Cr Gain | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the Cr channel gain of the SD2 video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cr channel of the color difference signal and when viewed on a vectorscope, it varies the vertical axis gain. | |
| SD2 Cb Offset | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the Cb channel offset of the SD2 video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cb channel and when viewed on a vectorscope, it shifts the color components of the horizontal axis. | |
| SD2 Cr Offset | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Adjusts the Cr channel offset of the SD2 video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cr channel and when viewed on a vectorscope, it shifts the color components of the vertical axis. | |
| SD2 Chroma Kill | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Proc | |
| Function: | Removes chrominance information from SD2 video input. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD2 Vertical Phase | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Adjusts the vertical phase of the SD2 frame sync. | |
| Valid Range: | 0 lines to 524 lines (for 525) 0 lines to 624 lines (for 625) |
|
| Default Setting: | 0 lines | |
| SD2 Horizontal Phase | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Adjusts the horizontal phase of the SD2 frame sync. | |
| Valid Range: | 0.00 us to 63.52 us (for 525) 0.00 uS to 63.96 us (for 625) |
|
| Default Setting: | 0.00 us | |
| SD2 LOV Mode | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Selects the output behavior mode when it detects loss of input video. | |
| Valid Settings: | Black, Freeze, Delayed Pass, Pass | |
| Default Setting: | Freeze | |
| Description: | Sets the output behavior in the event of Loss of Input Video. When set to Black or Freeze, the output video sends out either black or last good frozen image respectively. The Delayed Pass will freeze the video for about a second then pass the video to output. The Pass option will not freeze the output video so the converted input is sent to outputs straight thru. The Pass settings may affect the downstreaming units as any input disturbances to X75 unit is passed straight thru the output. | |
| SD2 Force Freeze | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Forces output video to freeze. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD2 Freeze Mode | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Selects a type of frozen output video. | |
| Valid Settings: | Field1, Field2, Frame | |
| Default Setting: | Field1 | |
| SD2 Force Black | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Forces output video to black. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD2 FS I/O Updates | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Enables Frame Synchronizer updates propagation delay updates. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD2 FS I/O Delay (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/SD2 FS & Timing | |
| Function: | Reports the propagation video delay thru the SD1 Frame Synchronizer. | |
| Default Setting: | 0.000 ms | |
| SD2 EDH Detect En | ||
| Navigation Path: | /Video Setup/SD2/DV Input/EDH | |
| Function: | Enables/disables EDH detection for SD2 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Description: | The use of EDH (Error detection and handling) testing techniques, proposed SMPTE RP 165 document, can recognize the inaccuracies in serial digital television installations. | |
| SD2 EDH Present (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/EDH | |
| Function: | Returns the presence of the EDH signal. | |
| Default Setting: | No | |
| Description: | Digital data packets containing the calculated checkwords, error information flags, and identification number are located in the ancillary data area of the vertical interval in a manner to complement the recommended practice of 525 and 625 sources. When X75 detects a presence of EDH signal from the selected SD-SDI input, it illuminates the EDH led on the front panel. | |
| SD2 EDH Error Count (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/EDH | |
| Function: | Reports the detected EDH error count. | |
| Default Setting: | 0 | |
| Description: | An error is defined as one or more data bits whose digital value is different at the destination from what it was at the source. Such errors may be caused by faulty equipment, bad joints or, more probably, by excessive cable lengths. FF is a CRC calculated for an entire field of the video signal, including the horizontal and vertical blanking intervals. AP is a CRC calculated in the active picture and does not include blanking. Errors in this region are considered more severe because they are visible in the video signal. ANC is a checksum calculated for any ancillary information in the digital video signal. Errors in the active picture will cause flags to be raised for both the FF and AP regions. Errors in the blanking intervals but not the ancillary data regions will cause flags to be raised for the FF region. Errors in the ancillary data will cause flags to be raised in the ANC and FF regions. | |
| SD2 EDH Error Clear | ||
| Navigation Path: | /Video Setup/SD2/DV Input/EDH | |
| Function: | Clears the EDH error counter. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SD2/DV I/P Std FB (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Returns the detected SD2 input standard. | |
| Default Setting: | N/A | |
| SD2/DV I/P Present (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Returns the presence of the SD2 input signal. | |
| Default Setting: | No | |
| SD2/DV I/P Locked (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Returns the locked status of the SD2 input signal. | |
| Default Setting: | No | |
| SD2/DV I/P Frozen (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Returns the video frozen status. | |
| Default Setting: | No | |
| Description: | The video contents are evaluated both spatially and temporally to determine whether the input video source is a frozen. As long as the motion is detected from the input video, the alarm is not asserted. The static test signal will generate the video frozen alarm. | |
| SD2/DV LowVideoDetected (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Indicates when the input video signal falls below the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the SD2 input video level is below the level set by the "Low Video Thresh" parameter in the Alarm Assert Setup menu, the Low Video Detected alarm is asserted. | |
| SD2/DV PkWhiteDetected (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Indicates when the input luminance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the SD2 input video's peak white level is above the level set by the "Peak White Thresh" parameter in the Alarm Assert Setup menu, the Peak White Detected alarm is asserted. | |
| SD2/DV PkChromaDetected (Read Only) | ||
| Navigation Path: | /Video Setup/SD2/DV Input/Status | |
| Function: | Indicates when the input chrominance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the SD2 input video's peak chroma level is above the level set by the "Peak Chroma Thresh" parameter in the Alarm Assert Setup menu, the Peak Chroma Detected alarm is asserted. | |
| HD Blk Clip Enable | ||
| Navigation Path: | /Video Setup/HD Input/Proc/Clipping | |
| Function: | Controls the activation of black clipping. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the HD Black Clip Enable option is set to ON, all luminance levels below black (digital value of 64) set by the HD Black Clip Level are clipped. When set to NO, all luminance video levels below black are passed without clipping. | |
| HD Blk Clip Level | ||
| Navigation Path: | /Video Setup/HD Input/Proc/Clipping | |
| Function: | Sets the black clip level. | |
| Valid Range: | -6.8 IRE to +6.8 IRE (for 525) -47.9 mV to +47.9 mV (for 625) |
|
| Default Setting: | 0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined black luminance video clipping level. The Chrominance video level is unaffected. | |
| HD Wht Clip Enable | ||
| Navigation Path: | /Video Setup/HD Input/Proc/Clipping | |
| Function: | Controls the activation of white clipping. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When the HD White Clip Enable option is set to ON, all luminance levels above white (digital value of 940) set by the HD White Clip Level are clipped. When set to NO, all luminance video levels above white are passed without clipping. | |
| HD Wht Clip Level | ||
| Navigation Path: | /Video Setup/HD Input/Proc/Clipping | |
| Function: | Sets the white clip level. | |
| Valid Range: | +90.0 IRE to +109.0 IRE (for 525) +636.8 mV to +763.1 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Description: | Allows user to set the predetermined white luminance video clipping level. The Chrominance video level is unaffected. | |
| HD Black Level | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the black level of the HD video input. | |
| Valid Range: | -15.0 IRE to +15.0 IRE (for 525) -100.0 mV to +100.0 mV (for 625) |
|
| Default Setting: | +0.0 IRE (for 525) 0.0 mV (for 625) |
|
| Description: | This control defines the darkest level of the picture contents. Increase or descrese in black level effects the brightness of the picture. | |
| HD Luma Gain | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the luminance gain of the HD video input. | |
| Valid Range: | -6.00 dB to +6.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the luminance (black and white) portion of a video signal and varying level effects the contrast of the picture. | |
| HD Chroma Gain | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the chrominance gain of the HD video input. | |
| Valid Range: | -3.00 dB to +3.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the chrominace (color) portion of a video signal and varying level effects the intensity of the color of the picture. | |
| HD Cb Gain | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the Cb channel gain of the HD video input. | |
| Valid Range: | -3.00 dB to +3.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cb channel of the color difference signal and when viewed on a vectorscope, it varies the horizontal axis gain. | |
| HD Cr Gain | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the Cr channel gain of the HD video input. | |
| Valid Range: | -3.00 dB to +3.00 dB | |
| Default Setting: | 0.00 dB | |
| Description: | It controls the Gain of the Cr channel of the color difference signal and when viewed on a vectorscope, it varies the vertical axis gain. | |
| HD Cb Offset | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the Cb channel offset of the HD video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cb channel and when viewed on a vectorscope, it shifts the color components of the horizontal axis. | |
| HD Cr Offset | ||
| Navigation Path: | /Video Setup/HD Input/Proc | |
| Function: | Adjusts the Cr channel offset of the HD video input. | |
| Valid Range: | 0.0 % to +100.0 % | |
| Default Setting: | +50.0 % | |
| Description: | It controls the color balance of the Cr channel and when viewed on a vectorscope, it shifts the color components of the vertical axis. | |
| HD I/P Detected Std (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | Returns the detected HD input standard. | |
| Default Setting: | --- | |
| HD I/P Present (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | Returns the presence of the HD input signal. | |
| Default Setting: | No | |
| HD I/P CRC Error (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | Returns the presence of the CRC error. | |
| Default Setting: | No | |
| HD FS Image Frozen (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | Returns the FS video frozen status. | |
| Default Setting: | No | |
| Description: | The video contents are evaluated both spatially and temporally to determine whether the input video source is a frozen. As long as the motion is detected from the input video, the alarm is not asserted. The static test signal will generate the video frozen alarm. | |
| HD LowVideoDetected (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | It's an indicator when the input video signal falls below the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the HD input video level is below the level set by the "Low Video Thresh" parameter in the Alarm Assert Setup menu, the Low Video Detected alarm is asserted. | |
| HD PkWhiteDetected (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | It's an indicator when the input luminance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the HD input video's peak white level is above the level set by the "Peak White Thresh" parameter in the Alarm Assert Setup menu, the Peak White Detected alarm is asserted. | |
| HD PkChromaDetected (Read Only) | ||
| Navigation Path: | /Video Setup/HD Input/Status | |
| Function: | It's an indicator when the input chrominance signal exceeds the defined threshold level. | |
| Default Setting: | No | |
| Description: | When the HD input video's peak chroma level is above the level set by the "Peak Chroma Thresh" parameter in the Alarm Assert Setup menu, the Peak Chroma Detected alarm is asserted. | |
| HD Force Black | ||
| Navigation Path: | /Video Setup/HD Input/HDFS | |
| Function: | Forces output video to black. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| HD Force Freeze | ||
| Navigation Path: | /Video Setup/HD Input/HDFS | |
| Function: | Forces output video to freeze. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| HD Freeze Mode | ||
| Navigation Path: | /Video Setup/HD Input/HDFS | |
| Function: | Selects a type of frozen output video. | |
| Valid Settings: | Field1, Field2, Frame | |
| Default Setting: | Field1 | |
| Description: | This setting instructs the Frame Synchronizer's memory device to grab which portion of the video (Field1, Field2, Frame) and send to outputs in the event of loss of input video or a user forces the freeze action. | |
| HD LOV Mode | ||
| Navigation Path: | /Video Setup/HD Input/HDFS | |
| Function: | Selects the output behavior mode when it detects loss of input video. | |
| Valid Settings: | Pass, Freeze, Black | |
| Default Setting: | Freeze | |
| Description: | Sets the output behavior in the event of Loss of Input Video. When set to Black or Freeze, the output video sends out either black or last good frozen image respectively. If set to Pass, the converted input video is sent out straight thru. This setting may affect the downstreaming units as any input disturbances to X75 unit is passed straight thru the output. | |
| HD1/HD-Fiber Input Select | ||
| Navigation Path: | /Video Setup/HD Input | |
| Function: | Selects between HD1 or HD-Fiber input. | |
| Valid Settings: | HD-Fiber, HD1 | |
| Default Setting: | HD1 | |
| HD Input Std Select | ||
| Navigation Path: | /Video Setup/HD Input | |
| Function: | Selects the operational standard for the HDTV video input. | |
| Valid Settings: | Auto, 1080i/59.94, 1080p/25, 1080i/50, 1080psf/23.98, 1080p/23.98, 720p/59.94, 720p/50 | |
| Default Setting: | Auto | |
| Strobe/Delay Insert | ||
| Navigation Path: | /Video Setup/Processing/Strobe/Delay | |
| Function: | Selects the input path in which to insert the Strobe/Delay Block. | |
| Valid Settings: | None, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | Bypass | |
| Strobe Mode | ||
| Navigation Path: | /Video Setup/Processing/Strobe/Delay | |
| Function: | Selects the Strobe or Film mode for output video. | |
| Valid Settings: | Disable, Strobe, Film | |
| Default Setting: | Disable | |
| Description: | The Film�mode�takes in video rate and produces a 3:2�sequence effectively giving a simulated 24fps look to the video output. | |
| Strobe Length | ||
| Navigation Path: | /Video Setup/Processing/Strobe/Delay | |
| Function: | Defines the number of fields to repeat during Strobe mode. | |
| Valid Range: | 1 to 200 | |
| Default Setting: | 4 | |
| Fixed Frm. Del 1 | ||
| Navigation Path: | /Video Setup/Processing/Strobe/Delay | |
| Function: | Adjusts the Frame delay of the SD Delay line. | |
| Valid Range: | 0 frame to 3 frame | |
| Default Setting: | 0 frame | |
| Fixed Ver. Del 1 | ||
| Navigation Path: | /Video Setup/Processing/Strobe/Delay | |
| Function: | Adjusts the Vertical delay of the SD Delay line. | |
| Valid Range: | 0 lines to 524 lines (for 525) 0 lines to 624 lines (for 625) |
|
| Default Setting: | 0 lines | |
| Fixed Hor. Del 1 | ||
| Navigation Path: | /Video Setup/Processing/Strobe/Delay | |
| Function: | Adjusts the Horizontal delay of the SD Delay line. | |
| Valid Range: | 0.00 us to 63.52 us (for 525) 0.00 uS to 63.96 us (for 625) |
|
| Default Setting: | 0.00 us | |
| Frozen Det Input | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Selects the input to the Frozen Video Detector. | |
| Valid Settings: | None, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Video Frozen (Read Only) | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Indicates whether or not video region is frozen. | |
| Default Setting: | No | |
| Zone Start H | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Defines the beginning of the horizontal detection window. | |
| Valid Range: | 0 to 716 | |
| Default Setting: | 100 | |
| Zone End H | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Defines the end of the horizontal detection window. | |
| Valid Range: | 2 to 718 | |
| Default Setting: | 600 | |
| Zone Start V | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Defines the beginning of the vertical detection window. | |
| Valid Range: | 0 to 239 (for 525) 0 to 289 (for 625) |
|
| Default Setting: | 10 | |
| Zone End V | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Defines the end of the vertical detection window. | |
| Valid Range: | 0 to 239 (for 525) 0 to 289 (for 625) |
|
| Default Setting: | 225 (for 525) 270 (for 625) |
|
| Zone Display | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Selects whether or not the detection zone is displayed. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Noise Threshold | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Specifies the noise threshold for frozen video detection. | |
| Valid Range: | 0 to 20 | |
| Default Setting: | 4 | |
| Frozen Detect Delay | ||
| Navigation Path: | /Video Setup/Processing/Frozen Detection | |
| Function: | Specifies the frozen video detection filter time. | |
| Valid Range: | 1 s to 60 s | |
| Default Setting: | 5 s | |
| SDNR Insert | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Selects the input path in which to insert the Noise Reducer. | |
| Valid Settings: | None, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | None | |
| Noise Reduction | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Enables the SD noise reducer. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Bypass | |
| Split Screen | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Controls the SD noise reducer's split screen mode; the filtered video is always on the left-hand side of the screen. | |
| Valid Settings: | Compare, Split, Off | |
| Default Setting: | Off | |
| Minimum Delay | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Adjusts the delay of the SD noise reducer. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Description: | The overall filter delay is 1 line when �Minimum Delay� parameter is set to Yes, and 1 field when set to No. The overall performance is slightly better when �Minimum Delay� is set to No. | |
| Impulse Noise Level | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Reduces the impulse noise typically coming from the satellite receiver. | |
| Valid Range: | 0 to 15 | |
| Default Setting: | 0 | |
| Description: | The impulse noise reducer helps to reduce impulse noise, particularly satellite noise. It automatically detects impulse noise and applies median filter when necessary. Adjusting this control to reduce more impulse noise, but to the extent not to see excessive motion artifact generated. | |
| Noise/Artifact Level | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Reduces the Gaussian noise and compression artifacts. | |
| Valid Range: | 0 to 18 | |
| Default Setting: | 4 | |
| Description: | The recursive 3D directional filter that attacks on Gaussian noise and compression artifacts, which include blocking artifacts and mosquito noise. Adjust this control to see more effect on filtering, but to a level not to see excessive blurring effect. | |
| Soften/Sharpen | ||
| Navigation Path: | /Video Setup/Processing/SD NR/Enhancement | |
| Function: | Adjusts the horizontal picture details for softness or sharpness. | |
| Valid Range: | -7 to +7 | |
| Default Setting: | 0 | |
| Description: | The softening filter can be used as compression pre-filter to reduce mosquito noise. The sharpening filter can be used to enhance picture appearance. Adjust �Softener / Sharpener� control for use of this filter. Turn negative on this parameter to achieve softening effect, and positive for sharpening effect. | |
| HD Image Enhance | ||
| Navigation Path: | /Video Setup/Processing/HD NR/Enhancement | |
| Function: | Adjusts the picture details to sharpen the image. | |
| Valid Range: | 0 to 50 | |
| Default Setting: | 0 | |
| HD Image Threshold | ||
| Navigation Path: | /Video Setup/Processing/HD NR/Enhancement | |
| Function: | Defines the image enhancement level. | |
| Valid Range: | 0 to 50 | |
| Default Setting: | 0 | |
| HD NR Enable | ||
| Navigation Path: | /Video Setup/Processing/HD NR/Enhancement | |
| Function: | Enables the HD noise reducer. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| HD NR Threshold | ||
| Navigation Path: | /Video Setup/Processing/HD NR/Enhancement | |
| Function: | Defines the noise reduction level. | |
| Valid Range: | 0 to 15 | |
| Default Setting: | 0 | |
| Vertical Bandwidth | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Advanced (SD Out) | |
| Function: | Controls the vertical bandwidth for the SD-ARC. | |
| Valid Range: | -50 to 50 | |
| Default Setting: | 0 | |
| Horizontal Bandwidth | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Advanced (SD Out) | |
| Function: | Controls the horizontal bandwidth for the SD-ARC. | |
| Valid Range: | -50 to 50 | |
| Default Setting: | 0 | |
| Aspect Ratio Lock | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Variable (SD Out) | |
| Function: | Couples both H and V controls. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| H. Size | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Variable (SD Out) | |
| Function: | Sets the horizontal size of the active input picture as viewed on the output. | |
| Valid Range: | -50.0% to +100.0% | |
| Default Setting: | 0.0% | |
| H. Position | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Variable (SD Out) | |
| Function: | Sets the horizontal position of the active input picture as viewed at the output. | |
| Valid Range: | -100.0% to +100.0% | |
| Default Setting: | 0.0% | |
| V. Size | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Variable (SD Out) | |
| Function: | Sets the vertical size of the active input picture as viewed on the output. | |
| Valid Range: | -50.0% to +100.0% | |
| Default Setting: | 0.0% | |
| V. Position | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Variable (SD Out) | |
| Function: | Sets the vertical position of the active input picture as viewed at the output. | |
| Valid Range: | -100.0% to +100.0% | |
| Default Setting: | 0.0% | |
| Aspect Ratio Lock | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Input Crop (SD Out) | |
| Function: | Couples the cropping controls. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Top | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Input Crop (SD Out) | |
| Function: | Sets the number of lines to crop from the top of the image before aspect ratio conversion. | |
| Valid Range: | 0 lines to 100 lines | |
| Default Setting: | 0 lines | |
| Bottom | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Input Crop (SD Out) | |
| Function: | Sets the number of lines to crop from the bottom of the image before aspect ratio conversion. | |
| Valid Range: | 0 lines to 100 lines | |
| Default Setting: | 0 lines | |
| Left | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Input Crop (SD Out) | |
| Function: | Sets the number of pixels to crop from the left side of the image before aspect ratio conversion. | |
| Valid Range: | 0 pixels to 100 pixels | |
| Default Setting: | 0 pixels | |
| Right | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Input Crop (SD Out) | |
| Function: | Sets the number of pixels to crop from the right side of the image before aspect ratio conversion. | |
| Valid Range: | 0 pixels to 100 pixels | |
| Default Setting: | 0 pixels | |
| Recall | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Presets (SD Out) | |
| Function: | Recalls presets for the SD-ARC. | |
| Valid Settings: | None, Preset 1, Preset 2, Preset 3, Preset 4 | |
| Default Setting: | None | |
| Save | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out)/Presets (SD Out) | |
| Function: | Saves presets for the SD-ARC. | |
| Valid Settings: | None, Preset 1, Preset 2, Preset 3, Preset 4 | |
| Default Setting: | None | |
| SD-ARC Insert | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out) | |
| Function: | Selects the input path in which to insert the SD ARC. | |
| Valid Settings: | None, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | Bypass | |
| Viewing Mode | ||
| Navigation Path: | /Video Setup/Processing/ARC (SD Out) | |
| Function: | Selects the viewing options for 16:9 input signal on a 4:3 output screen. | |
| Valid Settings: | User, Anamorphic, Letter Box, Center Cut, 14:9 Letter Box, 21:9 Letter Box | |
| Default Setting: | Anamorphic | |
| Vertical Bandwidth | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Advanced (HD Out) | |
| Function: | Controls the vertical bandwidth for the HD-ARC. | |
| Valid Range: | -50 to 50 | |
| Default Setting: | 0 | |
| Horizontal Bandwidth | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Advanced (HD Out) | |
| Function: | Controls the horizontal bandwidth for the HD-ARC. | |
| Valid Range: | -50 to 50 | |
| Default Setting: | 0 | |
| Aspect Ratio Lock | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Variable (HD Out) | |
| Function: | Couples both H and V controls. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| H. Size | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Variable (HD Out) | |
| Function: | Sets the horizontal size of the active input picture as viewed on the output. | |
| Valid Range: | -75.0% to +100.0% | |
| Default Setting: | 0.0% | |
| H. Position | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Variable (HD Out) | |
| Function: | Sets the horizontal position of the active input picture as viewed at the output. | |
| Valid Range: | -100.0% to +100.0% | |
| Default Setting: | 0.0% | |
| V. Size | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Variable (HD Out) | |
| Function: | Sets the vertical size of the active input picture as viewed on the output. | |
| Valid Range: | -75.0% to +33.3% | |
| Default Setting: | 0.0% | |
| V. Position | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Variable (HD Out) | |
| Function: | Sets the vertical position of the active input picture as viewed at the output. | |
| Valid Range: | -100.0% to +100.0% | |
| Default Setting: | 0.0% | |
| Aspect Ratio Lock | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Input Crop (HD Out) | |
| Function: | Couples the H and V cropping controls. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Top | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Input Crop (HD Out) | |
| Function: | Sets the number of lines to crop from the top of the image before aspect ratio conversion. | |
| Valid Range: | 0 lines to 100 lines | |
| Default Setting: | 0 lines | |
| Bottom | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Input Crop (HD Out) | |
| Function: | Sets the number of lines to crop from the bottom of the image before aspect ratio conversion. | |
| Valid Range: | 0 lines to 100 lines | |
| Default Setting: | 0 lines | |
| Left | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Input Crop (HD Out) | |
| Function: | Sets the number of pixels to crop from the left side of the image before aspect ratio conversion. | |
| Valid Range: | 0 pixels to 100 pixels | |
| Default Setting: | 0 pixels | |
| Right | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Input Crop (HD Out) | |
| Function: | Sets the number of pixels to crop from the right side of the image before aspect ratio conversion. | |
| Valid Range: | 0 pixels to 100 pixels | |
| Default Setting: | 0 pixels | |
| Recall | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Presets (HD Out) | |
| Function: | Recalls presets for the HD-ARC. | |
| Valid Settings: | None, Preset 1, Preset 2, Preset 3, Preset 4 | |
| Default Setting: | --- | |
| Save | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out)/Presets (HD Out) | |
| Function: | Saves presets for the HD-ARC. | |
| Valid Settings: | None, Preset 1, Preset 2, Preset 3, Preset 4 | |
| Default Setting: | --- | |
| Viewing Mode | ||
| Navigation Path: | /Video Setup/Processing/ARC (HD Out) | |
| Function: | Selects the viewing options for 4:3 input signal on a 16:9 output screen. | |
| Valid Settings: | User, Anamorphic, Pillar Box, Middle Cut, 14:9 Pillar Box, 21:9 Letter Box | |
| Default Setting: | Anamorphic | |
| Keyer/TSG Insert | ||
| Navigation Path: | /Video Setup/Processing/SD TSG & Slide | |
| Function: | Selects the input path in which to insert the Keyer/TSG. | |
| Valid Settings: | None, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| SD-TSG Enable | ||
| Navigation Path: | /Video Setup/Processing/SD TSG & Slide | |
| Function: | Controls the activation of SDTV Test Signal. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| SD-TSG Select | ||
| Navigation Path: | /Video Setup/Processing/SD TSG & Slide | |
| Function: | Selects the SDTV Test Signal. | |
| Valid Settings: | SMPTE Bars, EIA Bars, Full Field Bars, Bars/Reverse, Bars/Red, Bars 100%, Black, Gray, White, Luma Ramp, Modulated Ramp, Luma 5-Step, Modulated 5-Step, Shallow Ramp, Multiburst-60IRE, Luma Sweep 5.5MHz, Chroma Sweep, Pulse and Bar, NTC7 Composite, NTC7 Combination, FCC Composite, VIRS, Cross Hatch, Pluge, SIN(X)/X, Red Field, Timing Bowtie, Matrix 1, Matrix 2, FF Bounce, 90% Bounce, SDI EQ Test, SDI PLL Test, Zone Plate, Bars/Red 100%, EBU Bars, EBU Bars/Red, Multiburst 5.0MHz, Multiburst 5.8MHz, Multiburst 420mV, Pulse & Bar 2410t, Pulse & Bar 248t, Pulse & Bar 2t, Luma 10-Step, Valid Ramp, Multipulse 5.8MHz, Shallow Ramps, VITS 17, VITS 18, VITS 19, VITS 20, VITS 330, VITS 331, Red Field 75%, Red Field 100%, Ramp 100, Ramp 120, UBM Ramp, SDI Pathological, 30Hz, 25Hz | |
| Default Setting: | Bars 100% | |
| HD-TSG Enable | ||
| Navigation Path: | /Video Setup/Processing/HD TSG & Slide | |
| Function: | Controls the activation of HDTV Test Signal. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| HD-TSG Select | ||
| Navigation Path: | /Video Setup/Processing/HD TSG & Slide | |
| Function: | Selects the HDTV Test Signal. | |
| Valid Settings: | Black, Color Bars 100%, Color Bars 75%, Color Bars 100% 4:3, Horizontal Sweep Y-only, Horizontal Sweep, White, 10-Step, 5-Step, Ramp Y-only, Ramp, Multiburst Y-only, Multiburst, Pluge, Aspect 4:3, RP219-1, RP219-2, RP219-3, RP219-4 | |
| Default Setting: | Color Bars 75% | |
| HD Input Frame Delay | ||
| Navigation Path: | /Video Setup/Processing | |
| Function: | Adjusts the Frame phase of the HD frame sync. | |
| Valid Range: | 0 frames to 7 frames (for Interlaced) 0 frames to 15 frames (for Progressive) |
|
| Default Setting: | 0 frames | |
| HD Out V-Phase | ||
| Navigation Path: | /Video Setup/Processing | |
| Function: | Adjusts the vertical phase of the HD frame sync. | |
| Valid Range: | 0 lines to 1124 lines (for 1080i/59.94) 0 lines to 749 lines (for 720p/59.94) 0 lines to 1124 lines (for 1080i/50) 0 lines to 749 lines (for 720p/50) 0 lines to 1124 lines (for 1080p/25) |
|
| Default Setting: | 0 lines | |
| HD Out H-Phase | ||
| Navigation Path: | /Video Setup/Processing | |
| Function: | Adjusts the horizontal phase of the HD frame sync. | |
| Valid Range: | 0.000 us to 29.646 us (for 1080i/59.94) 0.000 us to 22.231 us (for 720p/59.94) 0.000 us to 35.542 us (for 1080i/50) 0.000 us to 26.653 us (for 720p/50) 0.000 us to 35.542 us (for 1080p/25) |
|
| Default Setting: | 0.000 us | |
| SD-ARC/HD Dn V-Ph | ||
| Navigation Path: | /Video Setup/Processing | |
| Function: | Adjusts the vertical phase of the Down Converted signal. | |
| Valid Range: | 0 lines to 524 lines (for 525) 0 lines to 624 lines (for 625) |
|
| Default Setting: | 0 lines | |
| SD-ARC/HD Dn H-Ph | ||
| Navigation Path: | /Video Setup/Processing | |
| Function: | Adjusts the horizontal phase of the Down Converted signal. | |
| Valid Range: | 0.00 us to 63.52 us (for 525) 0.00 us to 63.96 us (for 625) |
|
| Default Setting: | 0.00 us | |
| AUX Setup | ||
| Navigation Path: | /Video Setup/Analog Video Output/AUX Output | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the AUX output. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | Add (for 525) No Setup (for 625) |
|
| Description: | This control is not applicable to 625 line standard. | |
| AUX Sync/Comp | ||
| Navigation Path: | /Video Setup/Analog Video Output/AUX Output | |
| Function: | Specifies whether the Aux Sync connections on the Multi-I/O breakout cable will provide sync or composite output. | |
| Valid Settings: | Sync, Composite | |
| Default Setting: | Composite | |
| AUX Video Out Std | ||
| Navigation Path: | /Video Setup/Analog Video Output/AUX Output | |
| Function: | Selects the AUX Composite video output standard. | |
| Valid Settings: | NTSC, PAL-M, PAL-B, SECAM | |
| Default Setting: | NTSC (for 525) PAL-B (for 625) |
|
| R Sync Enable | ||
| Navigation Path: | /Video Setup/Analog Video Output/AUX Output | |
| Function: | Controls the addition of SYNC signal to R channel output. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| G Sync Enable | ||
| Navigation Path: | /Video Setup/Analog Video Output/AUX Output | |
| Function: | Controls the addition of SYNC signal to G channel output. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| B Sync Enable | ||
| Navigation Path: | /Video Setup/Analog Video Output/AUX Output | |
| Function: | Controls the addition of SYNC signal to B channel output. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| Fld1 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld1 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 1 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 10 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 11 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 12 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 13 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 14 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 15 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 16 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 17 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 18 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 19 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 20 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 21 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Fld2 Line 22 | ||
| Navigation Path: | /Video Setup/Analog Video Output/VBI SETUP Option/Field 2 | |
| Function: | Allows the option to add the 7.5 IRE pedestal level to the selected line. | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | No Setup | |
| Description: | This control is only applicable to 525 standard signals. This control allows the option to add the SETUP (7.5 IRE pedestal) signal to the selected VBI line to properly reconstruct the analog video output's VBI blanking level. | |
| Analog Width | ||
| Navigation Path: | /Video Setup/Analog Video Output | |
| Function: | Specifies the number of "samples" per video line. A standard analog NTSC signal consists of 714 "samples" per line; setting this option to 720 (common for digital signals) allows information to be stored outside of the normal NTSC width, but may cause problems with some equipment. | |
| Valid Settings: | Normal (714), Digital (720) | |
| Default Setting: | Normal (714) | |
| Description: | This control is not applicable to 625 line standard. | |
| Cmpst Out Std Select | ||
| Navigation Path: | /Video Setup/Analog Video Output | |
| Function: | Selects the Composite video output standard. | |
| Valid Settings: | NTSC, PAL-M, PAL-B | |
| Default Setting: | NTSC (for 525) PAL-B (for 625) |
|
| Color Frame Offset | ||
| Navigation Path: | /Video Setup/Analog Video Output | |
| Function: | Adjusts the color framing sequence to have a correct SC/H output. | |
| Valid Range: | 1 to 2 (for 525) 1 to 4 (for 625) |
|
| Default Setting: | 1 | |
| Color Frame Source | ||
| Navigation Path: | /Video Setup/Analog Video Output | |
| Function: | Selects the source for the color framing to have a correct SC/H output. | |
| Valid Settings: | Freerun, Genlock | |
| Default Setting: | Genlock | |
| SETUP Out Level | ||
| Navigation Path: | /Video Setup/Analog Video Output | |
| Function: | Specifies whether or not setup should be included in the video output. This setting is not applicable in 625-line mode (PAL) | |
| Valid Settings: | Add, No Setup | |
| Default Setting: | Add (for 525) No Setup (for 625) |
|
| HD Out Std Select | ||
| Navigation Path: | /Video Setup/Digital Output | |
| Function: | Selects the HD output video standard. | |
| Valid Settings: | Auto, 1080i/59.94, 1080p/25, 1080i/50, 1080p/23.98, 720p/59.94, 720p/50 | |
| Default Setting: | Auto | |
| HD Out CC Embed | ||
| Navigation Path: | /Video Setup/Digital Output | |
| Function: | Controls embedding of CC data on the HD video output. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| HD Laser Enable | ||
| Navigation Path: | /Video Setup/Digital Output | |
| Function: | Controls the activation of laser output. | |
| Valid Settings: | No, Yes | |
| Default Setting: | Yes | |
| SD1 Out EDH Insert | ||
| Navigation Path: | /Video Setup/Digital Output | |
| Function: | Allows insertion of EDH signal. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| SD2 Out EDH Insert | ||
| Navigation Path: | /Video Setup/Digital Output | |
| Function: | Allows insertion of EDH signal. | |
| Valid Settings: | On, Off | |
| Default Setting: | On | |
| Analog In | ||
| Navigation Path: | /Video Setup/Routing Setup/Auto Detect Setup | |
| Function: | Assigns the precedence level for the Analog input video. | |
| Valid Settings: | Highest, High, Normal, Low, Lowest | |
| Default Setting: | Normal | |
| Description: | The video precedence level works in conjunction with the Auto Detect setting of the I/P Video Mode parameter where each inputs can be assigned with the preference level for the order of selection. For example in the Auto-Detect mode, if SD1 is set High and HD1 is set Normal and both inputs are fed simultaneously, the SD1 input is selected. However, when SD1 input is removed, the HD1 input gets selected. When all the inputs have the same precedence level, the SD1 input is selected as a default source. | |
| SD1 In | ||
| Navigation Path: | /Video Setup/Routing Setup/Auto Detect Setup | |
| Function: | Assigns the precedence level for the SD1 input video. | |
| Valid Settings: | Highest, High, Normal, Low, Lowest | |
| Default Setting: | Normal | |
| Description: | The video precedence level works in conjunction with the Auto Detect setting of the I/P Video Mode parameter where each inputs can be assigned with the preference level for the order of selection. For example in the Auto-Detect mode, if SD1 is set High and HD1 is set Normal and both inputs are fed simultaneously, the SD1 input is selected. However, when SD1 input is removed, the HD1 input gets selected. When all the inputs have the same precedence level, the SD1 input is selected as a default source. | |
| SD2/DV In | ||
| Navigation Path: | /Video Setup/Routing Setup/Auto Detect Setup | |
| Function: | Assigns the precedence level for the SD2 input video. | |
| Valid Settings: | Highest, High, Normal, Low, Lowest | |
| Default Setting: | Normal | |
| Description: | The video precedence level works in conjunction with the Auto Detect setting of the I/P Video Mode parameter where each inputs can be assigned with the preference level for the order of selection. For example in the Auto-Detect mode, if SD1 is set High and HD1 is set Normal and both inputs are fed simultaneously, the SD1 input is selected. However, when SD1 input is removed, the HD1 input gets selected. When all the inputs have the same precedence level, the SD1 input is selected as a default source. | |
| HD1/HD-Fiber In | ||
| Navigation Path: | /Video Setup/Routing Setup/Auto Detect Setup | |
| Function: | Assigns the precedence level for the HD1 input video. | |
| Valid Settings: | Highest, High, Normal, Low, Lowest | |
| Default Setting: | Normal | |
| Description: | The video precedence level works in conjunction with the Auto Detect setting of the I/P Video Mode parameter where each inputs can be assigned with the preference level for the order of selection. For example in the Auto-Detect mode, if SD1 is set High and HD1 is set Normal and both inputs are fed simultaneously, the SD1 input is selected. However, when SD1 input is removed, the HD1 input gets selected. When all the inputs have the same precedence level, the SD1 input is selected as a default source. | |
| HD2 In | ||
| Navigation Path: | /Video Setup/Routing Setup/Auto Detect Setup | |
| Function: | Assigns the precedence level for the HD2 input video. | |
| Valid Settings: | Highest, High, Normal, Low, Lowest | |
| Default Setting: | Normal | |
| Description: | The video precedence level works in conjunction with the Auto Detect setting of the I/P Video Mode parameter where each inputs can be assigned with the preference level for the order of selection. For example in the Auto-Detect mode, if SD1 is set High and HD1 is set Normal and both inputs are fed simultaneously, the SD1 input is selected. However, when SD1 input is removed, the HD1 input gets selected. When all the inputs have the same precedence level, the SD1 input is selected as a default source. | |
| Video Switch Delay | ||
| Navigation Path: | /Video Setup/Routing Setup/Auto Detect Setup | |
| Function: | Determines the video precedence switching delay. | |
| Valid Range: | 0.0 s to 5.0 s | |
| Default Setting: | 0.1 s | |
| Analog Out Sel | ||
| Navigation Path: | /Video Setup/Routing Setup/Video M-Path | |
| Function: | Selects the video source for the Analog video output. | |
| Valid Settings: | Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | In Multi-Path mode, multiple video sources can be selected and sent to the assigned output. When the multiple video signals are selected, the M-Path Led on the front panel is illuminated. This control allows the selected input video to be converted and sent out to the analog video outputs (Composite, S-Video, CAV). | |
| HD Out Sel | ||
| Navigation Path: | /Video Setup/Routing Setup/Video M-Path | |
| Function: | Selects the video source for the HDTV SDI video output. | |
| Valid Settings: | Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | In Multi-Path mode, multiple video sources can be selected and sent to the assigned output. When the multiple video signals are selected, the M-Path Led on the front panel is illuminated. This control allows the selected input video to be converted and sent out to the HD outputs. If the "DVI out Src Select" parameter is set to HD, the DVI-D output will have the same content. | |
| SDI 1 Out Sel | ||
| Navigation Path: | /Video Setup/Routing Setup/Video M-Path | |
| Function: | Selects the video source for the SDTV SDI 1 video output. | |
| Valid Settings: | Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | In Multi-Path mode, multiple video sources can be selected and sent to the assigned output. When the multiple video signals are selected, the M-Path Led on the front panel is illuminated. This control allows the selected input video to be converted and sent out to the SD1 output. If the "DVI out Src Select" parameter is set to SD, the DVI-D output will have the same content. | |
| SDI 2 Out Sel | ||
| Navigation Path: | /Video Setup/Routing Setup/Video M-Path | |
| Function: | Selects the video source for the SDTV SDI 2 video output. | |
| Valid Settings: | Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | In Multi-Path mode, multiple video sources can be selected and sent to the assigned output. When the multiple video signals are selected, the M-Path Led on the front panel is illuminated. This control allows the selected input video to be converted and sent out to the SD2 and DV outputs. | |
| StrV Out Sel | ||
| Navigation Path: | /Video Setup/Routing Setup/Video M-Path | |
| Function: | Selects the video source for the Streaming video output. | |
| Valid Settings: | Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | In Multi-Path mode, multiple video sources can be selected and sent to the assigned output. When the multiple video signals are selected, the M-Path Led on the front panel is illuminated. This control allows the selected input video to be converted and sent out to the optional Streaming video output. | |
| Input A | ||
| Navigation Path: | /Video Setup/Routing Setup/Simulcast | |
| Function: | Simulcast video input A | |
| Valid Settings: | M-Path, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | The main primary video source can be assigned with this option for the Simulcast Input A source for A/B switching. | |
| Input B | ||
| Navigation Path: | /Video Setup/Routing Setup/Simulcast | |
| Function: | Simulcast video input B | |
| Valid Settings: | M-Path, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | SD1 | |
| Description: | The main primary video source can be assigned with this option for the Simulcast Input B source for A/B switching. | |
| Simulcast Sel | ||
| Navigation Path: | /Video Setup/Routing Setup/Simulcast | |
| Function: | Selects the Simulcast input source. | |
| Valid Settings: | Input A, Input B | |
| Default Setting: | Input A | |
| Description: | It allows the A/B video switching in the Simulcast mode and it also can be triggered from the GPI input. | |
| I/P Video Mode | ||
| Navigation Path: | /Video Setup/Routing Setup | |
| Function: | Selects the input video operation mode. | |
| Valid Settings: | Auto Detect, M-Path (User), Simulcast | |
| Default Setting: | Auto Detect | |
| Description: | This control defines the operational mode of the input video. When set to Auto Detect, the unit will detect the applied video source signal and perform the proper routing and conversions internally. The User Select setting allows the user to manually override the signal source selection. If multiple video input sources are selected, the unit automatically forces this parameter to the User Select option. The Simulcast is a special mode where the Main (primary) and Backup (secondary) high definition signals are switched to and from Main (primary) and Backup (secondary) standard definition signals. The simultaneous outputs of both high and standard definition outputs are provided. When the Simulcast mode is selected, the front panel led will be illuminated. | |
| All Out Sel | ||
| Navigation Path: | /Video Setup/Routing Setup | |
| Function: | Selects a video source to be fed to all outputs. | |
| Valid Settings: | M-Path, Composite, S-Video, CAV, SD1, SD2, DV, HD-Fiber, HD1, HD2 | |
| Default Setting: | M-Path | |
| Description: | This is the most simple mode of operation where a single selected video source is fed to all possible video outputs. The X75 unit automatically routes and performs all necessary conversions to provide the correct video outputs. | |
| Gain 1 (Ch1-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 2 (Ch1-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 3 (Ch2-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 4 (Ch2-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 5 (Ch3-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 6 (Ch3-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 7 (Ch4-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 8 (Ch4-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 9 (Ch5-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 10 (Ch5-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 11 (Ch6-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 12 (Ch6-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 13 (Ch7-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 14 (Ch7-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 15 (Ch8-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 16 (Ch8-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 17 (Ch9-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 18 (Ch9-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 19 (Ch10-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 20 (Ch10-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 21 (Ch11-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 22 (Ch11-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 23 (Ch12-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 24 (Ch12-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 25 (Ch13-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 26 (Ch13-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 27 (Ch14-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 28 (Ch14-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 29 (Ch15-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 30 (Ch15-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 31 (Ch16-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Gain 32 (Ch16-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Gain | |
| Function: | Adjusts the audio Gain of the selected channel. | |
| Valid Range: | -18.0 dB to +18.0 dB | |
| Default Setting: | 0.0 dB | |
| Delay Lock | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Couples fixed delay controls. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Delay 1 (Ch1-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 2 (Ch1-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 3 (Ch2-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 4 (Ch2-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 5 (Ch3-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 6 (Ch3-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 7 (Ch4-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 8 (Ch4-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 9 (Ch5-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 10 (Ch5-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 11 (Ch6-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 12 (Ch6-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 13 (Ch7-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 14 (Ch7-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 15 (Ch8-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 16 (Ch8-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 17 (Ch9-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 18 (Ch9-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 19 (Ch10-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 20 (Ch10-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 21 (Ch11-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 22 (Ch11-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 23 (Ch12-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 24 (Ch12-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 25 (Ch13-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 26 (Ch13-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 27 (Ch14-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 28 (Ch14-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 29 (Ch15-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 30 (Ch15-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 31 (Ch16-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Delay 32 (Ch16-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Delay | |
| Function: | Specifies the user fixed delay to be added to the audio stream. | |
| Valid Range: | 0.000 ms to 2500.000 ms | |
| Default Setting: | 0.000 ms | |
| Invert 1 (Ch1-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 2 (Ch1-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 3 (Ch2-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 4 (Ch2-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 5 (Ch3-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 6 (Ch3-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 7 (Ch4-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 8 (Ch4-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 9 (Ch5-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 10 (Ch5-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 11 (Ch6-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 12 (Ch6-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 13 (Ch7-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 14 (Ch7-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 15 (Ch8-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 16 (Ch8-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 17 (Ch9-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 18 (Ch9-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 19 (Ch10-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 20 (Ch10-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 21 (Ch11-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 22 (Ch11-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 23 (Ch12-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 24 (Ch12-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 25 (Ch13-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 26 (Ch13-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 27 (Ch14-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 28 (Ch14-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 29 (Ch15-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 30 (Ch15-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 31 (Ch16-L) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Invert 32 (Ch16-R) | ||
| Navigation Path: | /Audio Setup/Input Setup/Phase Invert | |
| Function: | Inverts the selected audio channel to correct for phase error. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this mode phase-shifts the channel by 180� to compensate for incorrect wiring (+ and - reversed) in either the left or right of balanced analog audio connections. | |
| Anlg1/2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps analog inputs 1/2. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Anlg3/4 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps analog inputs 3/4. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES1 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES1. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES2. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES3 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES3. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES4 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES4. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES5 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES5. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES6 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES6. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES7 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES7. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES8 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps channels within AES8. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX1/2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 1/2. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX3/4 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 3/4. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX5/6 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 5/6. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX7/8 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 7/8. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX9/10 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 9/10. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX11/2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 11/12. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX13/14 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 13/14. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SDX15/16 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps SDX channels 15/16. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX1/2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 1/2. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX3/4 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 3/4. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX5/6 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 5/6. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX7/8 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 7/8. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX9/10 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 9/10. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX11/2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 11/12. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX13/14 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 13/14. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| HDX15/16 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps HDX channels 15/16. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Dolby1/2 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps Dolby channels 1/2. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Dolby3/4 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps Dolby channels 3/4. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Dolby5/6 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps Dolby channels 5/6. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Dolby7/8 Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps Dolby channels 7/8. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| DolbyAux Swap | ||
| Navigation Path: | /Audio Setup/Input Setup/Channel Swap | |
| Function: | Swaps the Dolby AUX channel. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AES1 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES2 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES3 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES4 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES5 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES6 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES7 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| AES8 Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced AES audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| DARS Bal/UnBal Sel | ||
| Navigation Path: | /Audio Setup/Input Setup/AES & DARS Audio | |
| Function: | Selects between Unbalanced or Balanced DARS audio input. | |
| Valid Settings: | Balanced, UnBalanced | |
| Default Setting: | UnBalanced | |
| HDX DBN Err Ctrl | ||
| Navigation Path: | /Audio Setup/Input Setup/Demuxed Audio | |
| Function: | Selects the reporting behavior when the demuxed audio signal has any DBN error in any groups. | |
| Valid Settings: | Alert, Ignore | |
| Default Setting: | Alert | |
| HDX Group Err Ctrl | ||
| Navigation Path: | /Audio Setup/Input Setup/Demuxed Audio | |
| Function: | Selects the audio output behavior when the demuxed audio signal has any errors. | |
| Valid Settings: | Repeat, Mute | |
| Default Setting: | Mute | |
| SDX DBN Err Ctrl | ||
| Navigation Path: | /Audio Setup/Input Setup/Demuxed Audio | |
| Function: | Selects the reporting behavior when the demuxed audio signal has any DBN error in any groups. | |
| Valid Settings: | Alert, Ignore | |
| Default Setting: | Alert | |
| SDX Group Err Ctrl | ||
| Navigation Path: | /Audio Setup/Input Setup/Demuxed Audio | |
| Function: | Selects the audio output behavior when the demuxed audio signal has any errors. | |
| Valid Settings: | Repeat, Mute | |
| Default Setting: | Mute | |
| SDX Channel | ||
| Navigation Path: | /Audio Setup/Input Setup/Demuxed Audio | |
| Function: | Selects the input SDI channel for the SD deembedder. | |
| Valid Settings: | SD1, SD2 | |
| Default Setting: | SD1 | |
| SRC/Gain Bypass Mode | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion automatically. | |
| Valid Settings: | Auto, Manual | |
| Default Setting: | Auto | |
| SRC1/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC2/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC3/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC4/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC5/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC6/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC7/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC8/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC9/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC10/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC11/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC12/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC13/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC14/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC15/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SRC16/Gain Bypass | ||
| Navigation Path: | /Audio Setup/Input Setup | |
| Function: | Controls the bypassing of the Sample Rate Conversion for compressed audio data. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Anlg Aud 1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Analog Audio | |
| Function: | Reports current status of analog audio input. | |
| Default Setting: | Silence | |
| Anlg Aud 2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Analog Audio | |
| Function: | Reports current status of analog audio input. | |
| Default Setting: | Silence | |
| Anlg Aud 3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Analog Audio | |
| Function: | Reports current status of analog audio input. | |
| Default Setting: | Silence | |
| Anlg Aud 4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Analog Audio | |
| Function: | Reports current status of analog audio input. | |
| Default Setting: | Silence | |
| AES1 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES1L audio. | |
| Default Setting: | Not Present | |
| AES1 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES1R audio. | |
| Default Setting: | Not Present | |
| AES2 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES2L audio. | |
| Default Setting: | Not Present | |
| AES2 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES2R audio. | |
| Default Setting: | Not Present | |
| AES3 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES3L audio. | |
| Default Setting: | Not Present | |
| AES3 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES3R audio. | |
| Default Setting: | Not Present | |
| AES4 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES4L audio. | |
| Default Setting: | Not Present | |
| AES4 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES4R audio. | |
| Default Setting: | Not Present | |
| AES5 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES5L audio. | |
| Default Setting: | Not Present | |
| AES5 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES5R audio. | |
| Default Setting: | Not Present | |
| AES6 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES6L audio. | |
| Default Setting: | Not Present | |
| AES6 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES6R audio. | |
| Default Setting: | Not Present | |
| AES7 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES7L audio. | |
| Default Setting: | Not Present | |
| AES7 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES7R audio. | |
| Default Setting: | Not Present | |
| AES8 L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES8L audio. | |
| Default Setting: | Not Present | |
| AES8 R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Reports current status of the AES8R audio. | |
| Default Setting: | Not Present | |
| DV Audio L-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Returns the status of the DV audio input. | |
| Default Setting: | Not Present | |
| DV Audio R-Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/AES/DV Audio | |
| Function: | Returns the status of the DV audio input. | |
| Default Setting: | Not Present | |
| HD Dmx 1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 5 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 6 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 7 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 8 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 9 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 10 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 11 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 12 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 13 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 14 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 15 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| HD Dmx 16 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/HD Demuxed Audio | |
| Function: | Reports current status of HD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx Group1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio/Advanced | |
| Function: | Reports SD demux errors in group 1. | |
| SD Dmx Group2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio/Advanced | |
| Function: | Reports SD demux errors in group 2. | |
| SD Dmx Group3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio/Advanced | |
| Function: | Reports SD demux errors in group 3. | |
| SD Dmx Group4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio/Advanced | |
| Function: | Reports SD demux errors in group 4. | |
| SD Dmx 1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 5 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 6 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 7 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 8 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 9 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 10 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 11 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 12 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 13 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 14 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 15 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| SD Dmx 16 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/SD Demuxed Audio | |
| Function: | Reports current status of SD demuxed audio. | |
| Default Setting: | Not Present | |
| Dolby1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby5 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby6 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby7 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| Dolby8 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| DolbyAuxL Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| DolbyAuxR Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Decoded Audio | |
| Function: | Reports current status of decoded Dolby audio. | |
| Default Setting: | Not Present | |
| DolbyEncL Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Encoded Audio | |
| Function: | Reports current status of encoded Dolby audio. | |
| Default Setting: | Not Present | |
| DolbyEncR Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Dolby Encoded Audio | |
| Function: | Reports current status of encoded Dolby audio. | |
| Default Setting: | Not Present | |
| I/P Ch1-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch1-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch2-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch2-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch3-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch3-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch4-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch4-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch5-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch5-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch6-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch6-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch7-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch7-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch8-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch8-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch9-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch9-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch10-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch10-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch11-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch11-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch12-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch12-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch13-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch13-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch14-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch14-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch15-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch15-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch16-L Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| I/P Ch16-R Audio Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status/Input Audio Type | |
| Function: | Returns the type of audio input signal. | |
| Default Setting: | PCM-Audio | |
| DARS Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status | |
| Function: | Returns the presence of the audio input signal. | |
| Default Setting: | No | |
| DARS Locked (Read Only) | ||
| Navigation Path: | /Audio Setup/Input Status | |
| Function: | Returns the locked status of the DARS signal. | |
| Default Setting: | No | |
| AES1 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES2 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES3 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES4 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES5 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES6 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES7 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| AES8 Out Bit Width | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| SD1/HD1 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD2/HD2 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD3/HD3 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD4/HD4 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD5/HD5 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD6/HD6 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD7/HD7 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD8/HD8 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD1 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD2 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD3 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD4 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD5 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD6 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD7 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| SD8 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 20 bits | |
| HD1 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD2 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD3 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD4 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD5 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD6 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD7 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| HD8 Mux BitWidth | ||
| Navigation Path: | /Audio Setup/Output Setup/Output Bit Width | |
| Function: | Specifies the sample size (bit width) of output audio. | |
| Valid Settings: | 24 bits, 20 bits, 16 bits | |
| Default Setting: | 24 bits | |
| ADS Clean | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Controls whether or not the HD embedder pre-cleans the ancillary data space. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| HD Mux Mode (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Controls the embedding mode of the HD Multiplexers. | |
| Valid Settings: | Auto, Append, Overwrite | |
| Default Setting: | Auto | |
| HD Mux Mode (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Controls the embedding mode of the HD Multiplexers. | |
| Valid Settings: | Auto, Append, Overwrite | |
| Default Setting: | Auto | |
| HD Mux Mode (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Controls the embedding mode of the HD Multiplexers. | |
| Valid Settings: | Auto, Append, Overwrite | |
| Default Setting: | Auto | |
| HD Mux Mode (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Controls the embedding mode of the HD Multiplexers. | |
| Valid Settings: | Auto, Append, Overwrite | |
| Default Setting: | Auto | |
| HD Mux Group (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Selects the audio group for embedded channels 1-4 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 1 | |
| HD Mux Group (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Selects the audio group for embedded channels 5-8 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 2 | |
| HD Mux Group (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Selects the audio group for embedded channels 9-12 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 3 | |
| HD Mux Group (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding/Advanced | |
| Function: | Selects the audio group for embedded channels 13-16 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 4 | |
| HD Mux En (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding | |
| Function: | Enables HD embedding for channels 1-4 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| HD Mux En (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding | |
| Function: | Enables HD embedding for channels 5-8 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| HD Mux En (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding | |
| Function: | Enables HD embedding for channels 9-12 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| HD Mux En (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/HD Embedding | |
| Function: | Enables HD embedding for channels 13-16 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD1 Mux 24-bit | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Enables 24-bit SD1 embedding | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SD1 Mux Mode (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD1 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD1 Mux Mode (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD1 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD1 Mux Mode (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD1 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD1 Mux Mode (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD1 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD1 Mux Group (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Selects the audio group for SD1 embedded channels 1-4 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 1 | |
| SD1 Mux Group (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Selects the audio group for SD1 embedded channels 5-8 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 2 | |
| SD1 Mux Group (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Selects the audio group for SD1 embedded channels 9-12 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 3 | |
| SD1 Mux Group (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding/Advanced | |
| Function: | Selects the audio group for SD1 embedded channels 13-16 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 4 | |
| SD1 Mux En (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding | |
| Function: | Enables SD1 embedding for channels 1-4 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD1 Mux En (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding | |
| Function: | Enables SD1 embedding for channels 5-8 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD1 Mux En (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding | |
| Function: | Enables SD1 embedding for channels 9-12 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD1 Mux En (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD1 Embedding | |
| Function: | Enables SD1 embedding for channels 13-16 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD2 Mux 24-bit | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Enables 24-bit SD2 embedding | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| SD2 Mux Mode (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD2 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD2 Mux Mode (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD2 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD2 Mux Mode (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD2 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD2 Mux Mode (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Controls the embedding mode of the SD2 Multiplexers. | |
| Valid Settings: | Auto, Left Justify, Follow, Overwrite, Clean & Justify, Clean & Disable | |
| Default Setting: | Auto | |
| SD2 Mux Group (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Selects the audio group for SD2 embedded channels 1-4 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 1 | |
| SD2 Mux Group (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Selects the audio group for SD2 embedded channels 5-8 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 2 | |
| SD2 Mux Group (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Selects the audio group for SD2 embedded channels 9-12 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 3 | |
| SD2 Mux Group (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding/Advanced | |
| Function: | Selects the audio group for SD2 embedded channels 13-16 | |
| Valid Settings: | Group 1, Group 2, Group 3, Group 4 | |
| Default Setting: | Group 4 | |
| SD2 Mux En (1-4) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding | |
| Function: | Enables SD2 embedding for channels 1-4 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD2 Mux En (5-8) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding | |
| Function: | Enables SD2 embedding for channels 5-8 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD2 Mux En (9-12) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding | |
| Function: | Enables SD2 embedding for channels 9-12 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD2 Mux En (13-16) | ||
| Navigation Path: | /Audio Setup/Output Setup/SD2 Embedding | |
| Function: | Enables SD2 embedding for channels 13-16 | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| SD1 Mux1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD1 Embedding | |
| Function: | Reports SD1 embedder 1 errors. | |
| SD1 Mux2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD1 Embedding | |
| Function: | Reports SD1 embedder 2 errors. | |
| SD1 Mux3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD1 Embedding | |
| Function: | Reports SD1 embedder 3 errors. | |
| SD1 Mux4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD1 Embedding | |
| Function: | Reports SD1 embedder 4 errors. | |
| SD2 Mux1 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD2 Embedding | |
| Function: | Reports SD2 embedder 1 errors. | |
| SD2 Mux2 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD2 Embedding | |
| Function: | Reports SD2 embedder 2 errors. | |
| SD2 Mux3 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD2 Embedding | |
| Function: | Reports SD2 embedder 3 errors. | |
| SD2 Mux4 Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Output Status/SD2 Embedding | |
| Function: | Reports SD2 embedder 4 errors. | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 1 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 2 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 3 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 4 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 5 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 6 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 7 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder/Incoming Metadata/Channel 8 | |
| Function: | Indicates the dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Vid Frame Sync Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder | |
| Function: | Status of the video vertical sync input. | |
| Default Setting: | Unknown | |
| I/P Video Frame Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby Decoder | |
| Function: | Indicates the current input video frame rate. | |
| Default Setting: | Unknown | |
| Ref Mux Sel | ||
| Navigation Path: | /Audio Setup/Dolby Decoder | |
| Function: | Selects the reference vertical sync for the Dolby Decoder. | |
| Valid Settings: | SD1, SD2, HD | |
| Default Setting: | SD1 | |
| Ext Metadata Out | ||
| Navigation Path: | /Audio Setup/Dolby Decoder | |
| Function: | Whether or not to output Dolby metadata on external serial connector. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 1 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 2 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 3 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 4 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 5 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 6 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 7 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program ID | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the program ID. | |
| Valid Settings: | Program 1, Program 2, Program 3, Program 4, Program 5, Program 6, Program 7, Program 8 | |
| Default Setting: | Program 8 | |
| Bitstream Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Valid Settings: | Complete Main, Music and Effects, Visually Impaired, Hearing Impaired, Dialogue, Commentary, Emergency, Voice over, Karaoke | |
| Default Setting: | Complete Main | |
| Coding Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the AC-3 coding mode. | |
| Valid Settings: | 1/0 (C), "2/0 (L, R)", "3/0 (L, C, R)", "2/1 (L, R, S)", "3/1 (L, C, R, S)", "2/2 (L, R, SL, SR)", "3/2 (L, C, R, SL, SR)" | |
| Default Setting: | 2/0 (L, R) | |
| Center Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the AC-3 center mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.596 (-4.5 dB), 0.500 (-6.0 dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Valid Settings: | 0.707 (-3.0 dB), 0.500 (-6.0 dB), 0.000 (-Inf dB) | |
| Default Setting: | 0.707 (-3.0 dB) | |
| Surround Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Dialog Normalization | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Valid Range: | -31 dB to -1 dB | |
| Default Setting: | -31 dB | |
| Aud. Production Info | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| AC-3 Mix Level | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Valid Range: | 80 dB SPL to 111 dB SPL | |
| Default Setting: | 100 dB SPL | |
| Room Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Valid Settings: | Not specified, "Large Room, X Curve Mon", "Small Room, Flat Mon" | |
| Default Setting: | Not specified | |
| Copyright Protected | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Original Bitstream | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Valid Settings: | Yes, No | |
| Default Setting: | Yes | |
| Ext BSI1 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Stereo Downmix | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Valid Settings: | Not specified, LtRt Preferred, LoRo Preferred | |
| Default Setting: | LtRt Preferred | |
| Ext LtRt Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LtRt Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Ctr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Valid Settings: | +3.0 dB, +1.5 dB, 0.0 dB, -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext LoRo Surr Mix Lvl | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Valid Settings: | -1.5 dB, -3.0 dB, -4.5 dB, -6.0 dB, -Inf dB | |
| Default Setting: | -3.0 dB | |
| Ext BSI2 Present | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Ext Surr EX Mode | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Valid Settings: | Unknown, No, Yes | |
| Default Setting: | No | |
| Ext A/D Type | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Valid Settings: | Standard, HDCD | |
| Default Setting: | Standard | |
| DC Highpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| B/W Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| LFE Ch Lowpass Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Phase Shift Flt | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Srnd Ch Attenuator | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| RF Cmpr Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Line Mode Profile | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Valid Settings: | None, "Film, Standard", "Film, Light", "Music, Standard", "Music, Light", Speech | |
| Default Setting: | None | |
| Program Configuration | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Default Metadata | |
| Function: | Specifies the program configuration of the Dolby E bitstream. | |
| Valid Settings: | 2 + 2, 2 + 2x1, 2 + 4x1, 2 + 6x1, 2x2 + 2x1, 2x2 + 4x1, 3x2, 3x2 + 2x1, 4, 4x1, 4 + 2, 4 + 2x1, 4 + 4, 4 + 2x2, 4 + 2 + 2x1, 4 + 4x1, 4x2, 5.1, 5.1 + 2, 5.1 + 2x1, 6x1, 7.1, 7.1 Screen, 8x1 | |
| Default Setting: | 5.1 + 2 | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 1 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 2 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 3 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 4 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 5 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 6 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 7 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program ID (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the program ID. | |
| Default Setting: | Program 1 | |
| Data Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the AC-3 data rate. | |
| Default Setting: | Not specified | |
| Bitstream Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the AC-3 bitstream mode. | |
| Default Setting: | Reserved | |
| Coding Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the AC-3 coding mode. | |
| Default Setting: | Unknown | |
| Center Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the AC-3 center mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the AC-3 surround mix level. | |
| Default Setting: | -Inf dB | |
| Surround Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies whether or not the program is a Dolby Surround encoded stereo mix. | |
| Default Setting: | Unknown | |
| Low Freq Effect Ch (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the status of the AC-3 low frequency effect channel. | |
| Default Setting: | Off | |
| Dialog Normalization (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the average dialogue level relative to 100%. | |
| Default Setting: | -1 dB | |
| Aud. Production Info (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates whether or not audio production parameters exist. | |
| Default Setting: | No | |
| AC-3 Mix Level (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the acoustic sound pressure level used during final audio mixing. | |
| Default Setting: | 80 dB SPL | |
| Room Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the type/calibration of the mixing room. | |
| Default Setting: | Not specified | |
| Copyright Protected (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates whether or not the program is copyright protected. | |
| Default Setting: | No | |
| Original Bitstream (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Specifies the AC-3 original bitstream flag. | |
| Default Setting: | No | |
| Ext BSI1 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates whether or not extended BSI1 metadata is present. | |
| Default Setting: | No | |
| Ext Stereo Downmix (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the preferred type of stereo downmix. | |
| Default Setting: | Not specified | |
| Ext LtRt Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the nominal LtRt downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LtRt Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the nominal LtRt downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext LoRo Ctr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the nominal LoRo downmix of the center channel. | |
| Default Setting: | -Inf dB | |
| Ext LoRo Surr Mix Lvl (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the nominal LoRo downmix of the surround channel(s). | |
| Default Setting: | -Inf dB | |
| Ext BSI2 Present (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates whether or not extended BSI2 metadata is present. | |
| Default Setting: | No | |
| Ext Surr EX Mode (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates if the program has been encoded in Surround EX. | |
| Default Setting: | Unknown | |
| Ext A/D Type (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the type of A/D used to capture the program. | |
| Default Setting: | Standard | |
| DC Highpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder DC highpass filter status. | |
| Default Setting: | Disable | |
| B/W Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder bandwidth lowpass filter status. | |
| Default Setting: | Disable | |
| LFE Ch Lowpass Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder LFE channel lowpass filter status. | |
| Default Setting: | Disable | |
| Srnd Phase Shift Flt (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder surround 90 degrees phase shift filter status. | |
| Default Setting: | Disable | |
| Srnd Ch Attenuator (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder 3 dB surround channel attenuator status. | |
| Default Setting: | Disable | |
| RF Overmodulation (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder RF overmodulation protection status. | |
| Default Setting: | Disable | |
| RF Cmpr Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder RF compression profile. | |
| Default Setting: | Unknown | |
| Line Mode Profile (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata/Channel 8 | |
| Function: | Indicates the AC-3 encoder dynamic range compression profile. | |
| Default Setting: | Unknown | |
| Program Configuration (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata | |
| Function: | Specifies the program configuration of the Dolby E bitstream. | |
| Default Setting: | 5.1 | |
| Output Frame Rate (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder/Output Metadata | |
| Function: | Specifies the frame rate of the Dolby E bitstream. | |
| Default Setting: | Unknown | |
| Ext. Metadata Status (Read Only) | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder | |
| Function: | Indicates external metadata status. | |
| Default Setting: | Not Present | |
| Frame Rate | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder | |
| Function: | Specifies the frame rate of the Dolby E bitstream. | |
| Valid Settings: | Auto, 23.98 fps, 24 fps, 25 fps, 29.97 fps, 30 fps | |
| Default Setting: | Auto | |
| Bit Depth | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder | |
| Function: | Specifies the number of bits per word within the Dolby E bitstream. | |
| Valid Settings: | 20 bit, 16 bit | |
| Default Setting: | 20 bit | |
| Ref Mux Sel | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder | |
| Function: | Selects the reference audio embedder for synchronizing the Dolby Encoder. | |
| Valid Settings: | SD1, SD2, HD | |
| Default Setting: | SD1 | |
| Meta Revert Md | ||
| Navigation Path: | /Audio Setup/Dolby E Encoder | |
| Function: | Specifies the metadata output if incoming bitstream is lost or corrupted. | |
| Valid Settings: | Default, Last used, Stop | |
| Default Setting: | Last used | |
| SRC1 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 1 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC2 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 2 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC3 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 3 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC4 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 4 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES2a/2b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC5 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 5 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX1/2 | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC6 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 6 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX3/4 | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC7 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 7 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX5/6 | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC8 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 8 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX7/8 | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC9 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 9 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC10 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 10 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES2a/2b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC11 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 11 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES3a/3b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC12 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 12 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES4a/4b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC13 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 13 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES5a/5b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC14 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 14 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES6a/6b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC15 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 15 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES7a/7b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| SRC16 Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for Channel 16 Sample Rate Converter. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES8a/8b | |
| Description: | Each SRC (Sample Rate Converter) has an option to choose any input audio sources. The selection of these SRCs are automated when a single audio source is selected and sent out to all outputs using the "Audio In" button. In M-Path mode, the user has the full control of these SRCs and the selected stereo input audio signal is sample rate converted at 48 kHz and sent to the ProcAmp block for further processing. | |
| Dolby Input Select | ||
| Navigation Path: | /Audio Setup/Routing/Input | |
| Function: | Selects the input audio source for the Dolby E/Dolby Digital Decoder. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| SMX1 Input 1 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 1 | |
| SMX1 Input 2 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 2 | |
| SMX1 Input 3 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 3 | |
| SMX1 Input 4 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 4 | |
| SMX1 Input 5 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 5 | |
| SMX1 Input 6 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 6 | |
| SMX1 Input 7 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 7 | |
| SMX1 Input 8 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 8 | |
| SMX1 Input 9 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 9 | |
| SMX1 Input 10 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 10 | |
| SMX1 Input 11 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 11 | |
| SMX1 Input 12 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 12 | |
| SMX1 Input 13 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 13 | |
| SMX1 Input 14 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 14 | |
| SMX1 Input 15 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 15 | |
| SMX1 Input 16 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD1 Embedded Audio | |
| Function: | Selects an audio source for the SD1 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 16 | |
| SMX2 Input 1 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 1 | |
| SMX2 Input 2 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 2 | |
| SMX2 Input 3 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 3 | |
| SMX2 Input 4 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 4 | |
| SMX2 Input 5 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 5 | |
| SMX2 Input 6 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 6 | |
| SMX2 Input 7 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 7 | |
| SMX2 Input 8 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 8 | |
| SMX2 Input 9 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 9 | |
| SMX2 Input 10 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 10 | |
| SMX2 Input 11 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 11 | |
| SMX2 Input 12 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 12 | |
| SMX2 Input 13 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 13 | |
| SMX2 Input 14 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 14 | |
| SMX2 Input 15 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 15 | |
| SMX2 Input 16 | ||
| Navigation Path: | /Audio Setup/Routing/Output/SD2 Embedded Audio | |
| Function: | Selects an audio source for the SD2 embedder. | |
| Valid Settings: | SMX/HMX 1, SMX/HMX 2, SMX/HMX 3, SMX/HMX 4, SMX/HMX 5, SMX/HMX 6, SMX/HMX 7, SMX/HMX 8, SMX/HMX 9, SMX/HMX 10, SMX/HMX 11, SMX/HMX 12, SMX/HMX 13, SMX/HMX 14, SMX/HMX 15, SMX/HMX 16 | |
| Default Setting: | SMX/HMX 16 | |
| DolbyEnc In1 | ||
| Navigation Path: | /Audio Setup/Routing/Output/Dolby E Encoder | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SMX/HMX 1/2, SMX/HMX 3/4, SMX/HMX 5/6, SMX/HMX 7/8, SMX/HMX 9/10, SMX/HMX 11/12, SMX/HMX 13/14, SMX/HMX 15/16 | |
| Default Setting: | SMX/HMX 1/2 | |
| DolbyEnc In2 | ||
| Navigation Path: | /Audio Setup/Routing/Output/Dolby E Encoder | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SMX/HMX 1/2, SMX/HMX 3/4, SMX/HMX 5/6, SMX/HMX 7/8, SMX/HMX 9/10, SMX/HMX 11/12, SMX/HMX 13/14, SMX/HMX 15/16 | |
| Default Setting: | SMX/HMX 3/4 | |
| DolbyEnc In3 | ||
| Navigation Path: | /Audio Setup/Routing/Output/Dolby E Encoder | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SMX/HMX 1/2, SMX/HMX 3/4, SMX/HMX 5/6, SMX/HMX 7/8, SMX/HMX 9/10, SMX/HMX 11/12, SMX/HMX 13/14, SMX/HMX 15/16 | |
| Default Setting: | SMX/HMX 5/6 | |
| DolbyEnc In4 | ||
| Navigation Path: | /Audio Setup/Routing/Output/Dolby E Encoder | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SMX/HMX 1/2, SMX/HMX 3/4, SMX/HMX 5/6, SMX/HMX 7/8, SMX/HMX 9/10, SMX/HMX 11/12, SMX/HMX 13/14, SMX/HMX 15/16 | |
| Default Setting: | SMX/HMX 7/8 | |
| AA Out1 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the analog audio outputs. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| AA Out2 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the analog audio outputs. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| AA Out3 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the analog audio outputs. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| AA Out4 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the analog audio outputs. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| AES1 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| AES1 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| AES2 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| AES2 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| AES3 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3a | |
| AES3 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3b | |
| AES4 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4a | |
| AES4 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4b | |
| AES5 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC5a | |
| AES5 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC5b | |
| AES6 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC6a | |
| AES6 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC6b | |
| AES7 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC7a | |
| AES7 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC7b | |
| AES8 OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC8a | |
| AES8 OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects an audio source for the AES output channels. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC8b | |
| Stream OutA | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects the source for the streaming output. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| Stream OutB | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects the source for the streaming output. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| SMX/HMX 1 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| SMX/HMX 2 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| SMX/HMX 3 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| SMX/HMX 4 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| SMX/HMX 5 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3a | |
| SMX/HMX 6 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3b | |
| SMX/HMX 7 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4a | |
| SMX/HMX 8 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4b | |
| SMX/HMX 9 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| SMX/HMX 10 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| SMX/HMX 11 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| SMX/HMX 12 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| SMX/HMX 13 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3a | |
| SMX/HMX 14 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3b | |
| SMX/HMX 15 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4a | |
| SMX/HMX 16 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD/HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4b | |
| SMX 1 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| SMX 2 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| SMX 3 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| SMX 4 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| SMX 5 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3a | |
| SMX 6 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3b | |
| SMX 7 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4a | |
| SMX 8 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4b | |
| SMX 9 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC5a | |
| SMX 10 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC5b | |
| SMX 11 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC6a | |
| SMX 12 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC6b | |
| SMX 13 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC7a | |
| SMX 14 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC7b | |
| SMX 15 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC8a | |
| SMX 16 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for SD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC8b | |
| HMX 1 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| HMX 2 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| HMX 3 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| HMX 4 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| HMX 5 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3a | |
| HMX 6 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3b | |
| HMX 7 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4a | |
| HMX 8 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4b | |
| HMX 9 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC5a | |
| HMX 10 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC5b | |
| HMX 11 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC6a | |
| HMX 12 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC6b | |
| HMX 13 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC7a | |
| HMX 14 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC7b | |
| HMX 15 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC8a | |
| HMX 16 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for HD embedders. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC8b | |
| DolbyEnc In1 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1a | |
| DolbyEnc In2 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC1b | |
| DolbyEnc In3 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2a | |
| DolbyEnc In4 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC2b | |
| DolbyEnc In5 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3a | |
| DolbyEnc In6 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC3b | |
| DolbyEnc In7 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4a | |
| DolbyEnc In8 | ||
| Navigation Path: | /Audio Setup/Routing/Output | |
| Function: | Selects audio source for the Dolby E encoder. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b, SRC1a+1b, SRC2a+2b, SRC3a+3b, SRC4a+4b, SRC5a+5b, SRC6a+6b, SRC7a+7b, SRC8a+8b, SRC9a+9b, SRC10a+10b, SRC11a+11b, SRC12a+12b, SRC13a+13b, SRC14a+14b, SRC15a+15b, SRC16a+16b, Tone 1, Tone 2, Tone 3/V2A-L, Tone 4/V2A-R, SMPTE RP155, EBU R68, Mute | |
| Default Setting: | SRC4b | |
| Ch1-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch1-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch1-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch1-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| Ch1-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX1/2 | |
| Ch1-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX1/2 | |
| Ch1-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch1-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX1/2 | |
| Ch1-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX1/2 | |
| Ch1-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 1 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX1/2 | |
| Ch2-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch2-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch2-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch2-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES2a/2b | |
| Ch2-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX3/4 | |
| Ch2-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX3/4 | |
| Ch2-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch2-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX3/4 | |
| Ch2-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX3/4 | |
| Ch2-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 2 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX3/4 | |
| Ch3-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch3-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch3-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch3-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES3a/3b | |
| Ch3-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX5/6 | |
| Ch3-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX5/6 | |
| Ch3-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch3-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX5/6 | |
| Ch3-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX5/6 | |
| Ch3-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 3 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX5/6 | |
| Ch4-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch4-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch4-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch4-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES4a/4b | |
| Ch4-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX7/8 | |
| Ch4-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX7/8 | |
| Ch4-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch4-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX7/8 | |
| Ch4-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX7/8 | |
| Ch4-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 4 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX7/8 | |
| Ch5-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch5-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch5-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch5-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES5a/5b | |
| Ch5-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX9/10 | |
| Ch5-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX9/10 | |
| Ch5-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch5-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX9/10 | |
| Ch5-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX9/10 | |
| Ch5-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 5 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX9/10 | |
| Ch6-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch6-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch6-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch6-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| Ch6-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX11/12 | |
| Ch6-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX11/12 | |
| Ch6-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch6-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX11/12 | |
| Ch6-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX11/12 | |
| Ch6-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 6 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX11/12 | |
| Ch7-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch7-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch7-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch7-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES2a/2b | |
| Ch7-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX13/14 | |
| Ch7-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX13/14 | |
| Ch7-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch7-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX13/14 | |
| Ch7-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX13/14 | |
| Ch7-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 7 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX13/14 | |
| Ch8-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch8-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch8-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch8-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES3a/3b | |
| Ch8-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX15/16 | |
| Ch8-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX15/16 | |
| Ch8-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch8-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX15/16 | |
| Ch8-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX15/16 | |
| Ch8-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 8 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX15/16 | |
| Ch9-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch9-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch9-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch9-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| Ch9-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX1/2 | |
| Ch9-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX1/2 | |
| Ch9-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch9-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX1/2 | |
| Ch9-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX1/2 | |
| Ch9-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 9 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX1/2 | |
| Ch10-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch10-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch10-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch10-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES2a/2b | |
| Ch10-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX3/4 | |
| Ch10-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX3/4 | |
| Ch10-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch10-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX3/4 | |
| Ch10-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX3/4 | |
| Ch10-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 10 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX3/4 | |
| Ch11-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch11-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch11-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch11-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES3a/3b | |
| Ch11-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX5/6 | |
| Ch11-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX5/6 | |
| Ch11-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch11-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX5/6 | |
| Ch11-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX5/6 | |
| Ch11-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 11 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX5/6 | |
| Ch12-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch12-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch12-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch12-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES4a/4b | |
| Ch12-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX7/8 | |
| Ch12-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX7/8 | |
| Ch12-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch12-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX7/8 | |
| Ch12-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX7/8 | |
| Ch12-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 12 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX7/8 | |
| Ch13-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch13-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch13-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch13-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES5a/5b | |
| Ch13-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX9/10 | |
| Ch13-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX9/10 | |
| Ch13-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch13-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX9/10 | |
| Ch13-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX9/10 | |
| Ch13-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 13 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX9/10 | |
| Ch14-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch14-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch14-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch14-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES1a/1b | |
| Ch14-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX11/12 | |
| Ch14-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX11/12 | |
| Ch14-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch14-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX11/12 | |
| Ch14-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX11/12 | |
| Ch14-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 14 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX11/12 | |
| Ch15-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch15-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch15-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA1/2 | |
| Ch15-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES2a/2b | |
| Ch15-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX13/14 | |
| Ch15-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX13/14 | |
| Ch15-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch15-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX13/14 | |
| Ch15-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX13/14 | |
| Ch15-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 15 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX13/14 | |
| Ch16-Aud Follows Vid | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Controls the activation of Audio-Follows-Video mode. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Ch16-AFV-Composite | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the Composite input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch16-AFV-SVideo | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the S-Video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AA3/4 | |
| Ch16-AFV-CAV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the CAV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | AES3a/3b | |
| Ch16-AFV-SD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the SD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX15/16 | |
| Ch16-AFV-SD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the SD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | SDX15/16 | |
| Ch16-AFV-DV | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the DV input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | DV_a/b | |
| Ch16-AFV-HDF | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the HD-Fiber input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX15/16 | |
| Ch16-AFV-HD1 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the HD1 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX15/16 | |
| Ch16-AFV-HD2 | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video/SRC 16 | |
| Function: | Selects the audio source to be linked to the HD2 input video. | |
| Valid Settings: | AA1/2, AA3/4, AES1a/1b, AES2a/2b, AES3a/3b, AES4a/4b, AES5a/5b, AES6a/6b, AES7a/7b, AES8a/8b, DV_a/b, SDX1/2, SDX3/4, SDX5/6, SDX7/8, SDX9/10, SDX11/12, SDX13/14, SDX15/16, HDX1/2, HDX3/4, HDX5/6, HDX7/8, HDX9/10, HDX11/12, HDX13/14, HDX15/16, Dolby1/2, Dolby3/4, Dolby5/6, Dolby7/8, DolbyAux, DolbyEnc | |
| Default Setting: | HDX15/16 | |
| SDX AFV Enable | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video | |
| Function: | Enables Audio-Follows-Video for SD Demux Source. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Global AFV Enable | ||
| Navigation Path: | /Audio Setup/Routing/Audio Follow Video | |
| Function: | Controls the activation of the Audio-Follows-Video mode for all SRCs | |
| Valid Settings: | ---, Enable, Disable | |
| Default Setting: | --- | |
| Audio In Src Select | ||
| Navigation Path: | /Audio Setup/Routing | |
| Function: | Selects a single audio input type to be sent to all outputs. | |
| Valid Settings: | User, Analog, AES, SD, DV, HD, Dolby Dec | |
| Default Setting: | --- | |
| ToneGen1 Level | ||
| Navigation Path: | /Audio Setup/Tones | |
| Function: | Adjusts the Tone amplitude. | |
| Valid Range: | -28.0 dBFS to +0.0 dBFS | |
| Default Setting: | -18.0 dBFS | |
| ToneGen2 Level | ||
| Navigation Path: | /Audio Setup/Tones | |
| Function: | Adjusts the Tone amplitude. | |
| Valid Range: | -28.0 dBFS to +0.0 dBFS | |
| Default Setting: | -18.0 dBFS | |
| ToneGen3 Level | ||
| Navigation Path: | /Audio Setup/Tones | |
| Function: | Adjusts the Tone amplitude. | |
| Valid Range: | -28.0 dBFS to +0.0 dBFS | |
| Default Setting: | -18.0 dBFS | |
| ToneGen4 Level | ||
| Navigation Path: | /Audio Setup/Tones | |
| Function: | Adjusts the Tone amplitude. | |
| Valid Range: | -28.0 dBFS to +0.0 dBFS | |
| Default Setting: | -18.0 dBFS | |
| AA1/2 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for analog audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AA3/4 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for analog audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES1 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES2 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES3 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES4 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES5 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES6 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES7 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES8 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Stream Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for streaming audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD1/HD1 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD2/HD2 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD3/HD3 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD4/HD4 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD5/HD5 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD6/HD6 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD7/HD7 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD8/HD8 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD1 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD2 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD3 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD4 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD5 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD6 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD7 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD8 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD1 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD2 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD3 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD4 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD5 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD6 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD7 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD8 Soft Limit En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Audio Limiter Enable | |
| Function: | Actives the audio soft limiter for HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AA1/2 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for analog audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AA3/4 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for analog audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES1 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES2 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES3 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES4 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES5 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES6 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES7 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| AES8 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for AES audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Stream Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for streaming audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD1/HD1 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD2/HD2 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD3/HD3 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD4/HD4 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD5/HD5 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD6/HD6 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD7/HD7 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD8/HD8 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD/HD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD1 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD2 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD3 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD4 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD5 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD6 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD7 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| SD8 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD1 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD2 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD3 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD4 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD5 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD6 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD7 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| HD8 Noise Gate En | ||
| Navigation Path: | /Audio Setup/Audio Limiter/Noise Gate Enable | |
| Function: | Enables the noise gate for SD embedded audio. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| Soft Limit Level | ||
| Navigation Path: | /Audio Setup/Audio Limiter | |
| Function: | Defines the audio soft limit level. | |
| Valid Range: | -60.000 dBFS to 0.000 dBFS | |
| Default Setting: | -18.000 dBFS | |
| Description: | The limiter will be activated only after the input audio level remains over the Soft Limit for the duration specified in the Attack option. Audio that exceeds the specified Soft Limit for less than the specified Attack time will not activate the limiter. Once the limiter has been activated, it will remain active until the audio signal has returned below the Soft Limit for the duration specified in the Decay option. If the input audio signal returns below the Soft Limit level for less than the specified Decay, the limiter remains active. | |
| Ratio | ||
| Navigation Path: | /Audio Setup/Audio Limiter | |
| Function: | Controls the slope of the audio limiter. | |
| Valid Range: | 1.0 to 999.9 | |
| Default Setting: | 2.0 | |
| Noise Gate Level | ||
| Navigation Path: | /Audio Setup/Audio Limiter | |
| Function: | Sets the noise gate level. | |
| Valid Range: | -140 dBFS to -60 dBFS | |
| Default Setting: | -140 dBFS | |
| Noise Gate Time | ||
| Navigation Path: | /Audio Setup/Audio Limiter | |
| Function: | Sets the noise gate activation threshold time. | |
| Valid Range: | 1 ms to 1000 ms | |
| Default Setting: | 20 ms | |
| Attack Time | ||
| Navigation Path: | /Audio Setup/Audio Limiter | |
| Function: | Specifies audio attack duration. | |
| Valid Range: | 1 ms to 1000 ms | |
| Default Setting: | 50 ms | |
| Description: | The limiter will be activated only after the input audio level remains over the Soft Limit for the duration specified in the Attack option. Audio that exceeds the specified Soft Limit for less than the specified Attack time will not activate the limiter. | |
| Decay Time | ||
| Navigation Path: | /Audio Setup/Audio Limiter | |
| Function: | Specifies audio decay duration. | |
| Valid Range: | 100 ms to 1000 ms | |
| Default Setting: | 200 ms | |
| Description: | Once the input audio signal has exceeded the Soft Limit and the limiter has been activated, it will remain active until the audio signal has returned below the Soft Limit for the duration specified in the Decay option. If the input audio signal returns below the Soft Limit level for less than the specified Decay, the limiter will remain active. | |
| I/O Delay SRC1 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC2 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC3 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC4 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC5 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC6 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC7 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC8 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC9 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC10 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC11 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC12 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC13 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC14 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC15 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| I/O Delay SRC16 | ||
| Navigation Path: | /Audio Setup/Global Audio Config/I/O Delay Config | |
| Function: | Selects the video output to track audio delays against. | |
| Valid Settings: | None, SD Out 1, SD Out 2, HD Out, Analog Out, DV Out, Stream Vid | |
| Default Setting: | SD Out 1 | |
| Description: | When enabled, the unit will automatically delay the audio data to match the video delay through the selected output. | |
| Audio Control Style | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Switches between Mono/Stereo control style. | |
| Valid Settings: | Mono, Stereo | |
| Default Setting: | Stereo | |
| Master Mute | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Mutes all audio output channels. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Description: | When enabled, this option mutes all of the audio output channels. | |
| V-bit Mute En | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Enables automatic muting of PCM outputs when the V bit is set. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| DARS Reference | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Selects the DARS reference source. | |
| Valid Settings: | Auto, Video, DARS, Off | |
| Default Setting: | Auto | |
| Dolby E Auto Align | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Whether or not to attempt automatic alignment of embedded Dolby E bitstreams. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Dolby E Align Delay | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Number of lines to offset automatic alignment of embedded Dolby E bitstreams. | |
| Valid Range: | 0 Ln to 30 Ln | |
| Default Setting: | 0 Ln | |
| Dolby Metadata Src | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Specifies the origin of Dolby E metadata. | |
| Valid Settings: | Default, External, Dolby Decoder | |
| Default Setting: | External | |
| Fade Time | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Adjusts the global audio fade rate. | |
| Valid Range: | 0.000 s to 10.000 s | |
| Default Setting: | 0.010 s | |
| AA_In Max Lvl | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Sets the maximum analog audio input level. | |
| Valid Range: | -9.0 dBu to 28.0 dBu | |
| Default Setting: | 28.0 dBu | |
| Description: | Defines the input headroom. | |
| AA_Out Max Lvl | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Sets the maximum analog audio output level. | |
| Valid Range: | -9.0 dBu to 28.0 dBu | |
| Default Setting: | 28.0 dBu | |
| Description: | Defines the output headroom. | |
| Voice-Over | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Controls the activation of the Voice-over. | |
| Valid Settings: | Active, Off | |
| Default Setting: | Off | |
| Voice-Over Ch Select | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Selects the Voice-over audio input channel. | |
| Valid Settings: | SRC1a, SRC1b, SRC2a, SRC2b, SRC3a, SRC3b, SRC4a, SRC4b, SRC5a, SRC5b, SRC6a, SRC6b, SRC7a, SRC7b, SRC8a, SRC8b, SRC9a, SRC9b, SRC10a, SRC10b, SRC11a, SRC11b, SRC12a, SRC12b, SRC13a, SRC13b, SRC14a, SRC14b, SRC15a, SRC15b, SRC16a, SRC16b | |
| Default Setting: | SRC8a | |
| Voice-Over Pgm Level | ||
| Navigation Path: | /Audio Setup/Global Audio Config | |
| Function: | Specifies the amount to attenuate the program audio when voice-over mixing is active. | |
| Valid Range: | -20.0 dB to 0.0 dB | |
| Default Setting: | -8.0 dB | |
| GL Oper Standard (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Reports the current Genlock standard. | |
| Default Setting: | N/A | |
| GL Standard FB (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Reports the detected Genlock standard. | |
| Default Setting: | N/A | |
| GL Present (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Returns the presence of the Genlock reference input signal. | |
| Default Setting: | No | |
| GL Burst Present (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Returns the presence of the Burst signal from Genlock input. | |
| Default Setting: | N/A | |
| GL Noise Present (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Returns the presence of the Noise from Genlock input. | |
| Default Setting: | N/A | |
| GL Locked (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Returns the locked status of the Genlock input. | |
| Default Setting: | N/A | |
| GL SCH Error (Read Only) | ||
| Navigation Path: | /Reference Setup/Status | |
| Function: | Returns the detected subcarrier/horizontal phase relationship from the Genlock input signal. | |
| Default Setting: | N/A | |
| GL Standard Set | ||
| Navigation Path: | /Reference Setup | |
| Function: | Selects the Genlock standard. | |
| Valid Settings: | Auto, NTSC, PAL-M, PAL-B, 1080i/59.94, 1080i/50, 1080p/25, 1080p/23.98, 720p/59.94, 720p/50 | |
| Default Setting: | Auto | |
| Genlock Lock Source | ||
| Navigation Path: | /Reference Setup | |
| Function: | Selects the Genlock reference clock lock source. | |
| Valid Settings: | External, Freerun, SDI 1, SDI 2, HD , Analog Video | |
| Default Setting: | External | |
| GL Fine Phase | ||
| Navigation Path: | /Reference Setup | |
| Function: | Adjusts the fine phase. | |
| Valid Range: | -18.5 ns to +18.5 ns | |
| Default Setting: | 0.0 ns | |
| GL Source Config | ||
| Navigation Path: | /Reference Setup | |
| Function: | Configures the Genlock source inputs. | |
| Valid Settings: | Loop-Thru, Split-525, Split-625 | |
| Default Setting: | Loop-Thru | |
| Description: | Loopthrough disconnects the internal terminations and connects the loopthru path and feeds the looped signal to thegenlock subsystem. Split-525 disconnects the loopthrough path and connects the terminations to both ports. The genlock selects the 525 Genlock BNC as the reference input. Split-625 disconnects the loopthrough path and connects the terminations to both ports. The genlock selects the 625 Genlock BNC as the reference input. | |
| ProgRef&Interlace Out | ||
| Navigation Path: | /Reference Setup | |
| Function: | When a progressive reference signal is used and the output is an interlaced format, this control allows timing of the output with reference to another unit. | |
| Valid Settings: | Normal, 0, +1 | |
| Default Setting: | 0 | |
| Delay 1 (Ch1-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch1-L. | |
| Default Setting: | 0.000 ms | |
| Delay 2 (Ch1-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch1-R. | |
| Default Setting: | 0.000 ms | |
| Delay 3 (Ch2-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch2-L. | |
| Default Setting: | 0.000 ms | |
| Delay 4 (Ch2-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch2-R. | |
| Default Setting: | 0.000 ms | |
| Delay 5 (Ch3-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch3-L. | |
| Default Setting: | 0.000 ms | |
| Delay 6 (Ch3-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch3-R. | |
| Default Setting: | 0.000 ms | |
| Delay 7 (Ch4-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch4-L. | |
| Default Setting: | 0.000 ms | |
| Delay 8 (Ch4-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch4-R. | |
| Default Setting: | 0.000 ms | |
| Delay 9 (Ch5-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch5-L. | |
| Default Setting: | 0.000 ms | |
| Delay 10 (Ch5-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch5-R. | |
| Default Setting: | 0.000 ms | |
| Delay 11 (Ch6-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch6-L. | |
| Default Setting: | 0.000 ms | |
| Delay 12 (Ch6-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch6-R. | |
| Default Setting: | 0.000 ms | |
| Delay 13 (Ch7-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch7-L. | |
| Default Setting: | 0.000 ms | |
| Delay 14 (Ch7-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch7-R. | |
| Default Setting: | 0.000 ms | |
| Delay 15 (Ch8-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch8-L. | |
| Default Setting: | 0.000 ms | |
| Delay 16 (Ch8-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch8-R. | |
| Default Setting: | 0.000 ms | |
| Delay 17 (Ch9-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch9-L. | |
| Default Setting: | 0.000 ms | |
| Delay 18 (Ch9-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch9-R. | |
| Default Setting: | 0.000 ms | |
| Delay 19 (Ch10-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch10-L. | |
| Default Setting: | 0.000 ms | |
| Delay 20 (Ch10-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch10-R. | |
| Default Setting: | 0.000 ms | |
| Delay 21 (Ch11-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch11-L. | |
| Default Setting: | 0.000 ms | |
| Delay 22 (Ch11-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch11-R. | |
| Default Setting: | 0.000 ms | |
| Delay 23 (Ch12-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch12-L. | |
| Default Setting: | 0.000 ms | |
| Delay 24 (Ch12-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch12-R. | |
| Default Setting: | 0.000 ms | |
| Delay 25 (Ch13-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch13-L. | |
| Default Setting: | 0.000 ms | |
| Delay 26 (Ch13-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch13-R. | |
| Default Setting: | 0.000 ms | |
| Delay 27 (Ch14-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch14-L. | |
| Default Setting: | 0.000 ms | |
| Delay 28 (Ch14-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch14-R. | |
| Default Setting: | 0.000 ms | |
| Delay 29 (Ch15-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch15-L. | |
| Default Setting: | 0.000 ms | |
| Delay 30 (Ch15-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch15-R. | |
| Default Setting: | 0.000 ms | |
| Delay 31 (Ch16-L) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch16-L. | |
| Default Setting: | 0.000 ms | |
| Delay 32 (Ch16-R) (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Video Delay Status | |
| Function: | V2A video delay with respect to Ch16-R. | |
| Default Setting: | 0.000 ms | |
| Left/Right Ch1 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch2 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch3 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch4 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch5 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch6 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch7 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch8 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch9 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch10 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch11 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch12 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch13 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch14 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch15 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| Left/Right Ch16 (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/Channel Swap Status | |
| Function: | Indicates whether left/right channels are swapped. | |
| Default Setting: | N/A | |
| V2A Video Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A video status. | |
| Default Setting: | N/A | |
| V2A 1 (Ch1-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch1-L. | |
| Default Setting: | N/A | |
| V2A 2 (Ch1-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch1-R. | |
| Default Setting: | N/A | |
| V2A 3 (Ch2-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch2-L. | |
| Default Setting: | N/A | |
| V2A 4 (Ch2-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch2-R. | |
| Default Setting: | N/A | |
| V2A 5 (Ch3-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch3-L. | |
| Default Setting: | N/A | |
| V2A 6 (Ch3-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch3-R. | |
| Default Setting: | N/A | |
| V2A 7 (Ch4-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch4-L. | |
| Default Setting: | N/A | |
| V2A 8 (Ch4-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch4-R. | |
| Default Setting: | N/A | |
| V2A 9 (Ch5-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch5-L. | |
| Default Setting: | N/A | |
| V2A 10 (Ch5-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch5-R. | |
| Default Setting: | N/A | |
| V2A 11 (Ch6-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch6-L. | |
| Default Setting: | N/A | |
| V2A 12 (Ch6-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch6-R. | |
| Default Setting: | N/A | |
| V2A 13 (Ch7-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch7-L. | |
| Default Setting: | N/A | |
| V2A 14 (Ch7-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch7-R. | |
| Default Setting: | N/A | |
| V2A 15 (Ch8-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch8-L. | |
| Default Setting: | N/A | |
| V2A 16 (Ch8-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch8-R. | |
| Default Setting: | N/A | |
| V2A17 (Ch9-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch9-L. | |
| Default Setting: | N/A | |
| V2A18 (Ch9-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch9-R. | |
| Default Setting: | N/A | |
| V2A19 (Ch10-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch10-L. | |
| Default Setting: | N/A | |
| V2A20 (Ch10-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch10-R. | |
| Default Setting: | N/A | |
| V2A21 (Ch11-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch11-L. | |
| Default Setting: | N/A | |
| V2A22 (Ch11-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch11-R. | |
| Default Setting: | N/A | |
| V2A23 (Ch12-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch12-L. | |
| Default Setting: | N/A | |
| V2A24 (Ch12-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch12-R. | |
| Default Setting: | N/A | |
| V2A25 (Ch13-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch13-L. | |
| Default Setting: | N/A | |
| V2A26 (Ch13-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch13-R. | |
| Default Setting: | N/A | |
| V2A27 (Ch14-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch14-L. | |
| Default Setting: | N/A | |
| V2A28 (Ch14-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch14-R. | |
| Default Setting: | N/A | |
| V2A29 (Ch15-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch15-L. | |
| Default Setting: | N/A | |
| V2A30 (Ch15-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch15-R. | |
| Default Setting: | N/A | |
| V2A31 (Ch16-L) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch16-L. | |
| Default Setting: | N/A | |
| V2A32 (Ch16-R) Status (Read Only) | ||
| Navigation Path: | /Video/Audio Timing/V2A Signal Status | |
| Function: | V2A status for Ch16-R. | |
| Default Setting: | N/A | |
| V2A Tx Enable | ||
| Navigation Path: | /Video/Audio Timing | |
| Function: | Enables transmission of V2A signals. | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Disable | |
| V2A Rx Video Src | ||
| Navigation Path: | /Video/Audio Timing | |
| Function: | Specifies video reference source for V2A. | |
| Valid Settings: | None, Analog Input, SD1, SD2, HD | |
| Default Setting: | SDI1 | |
| Align Leading Audio | ||
| Navigation Path: | /Video/Audio Timing | |
| Function: | Synchronizes fixed delay lines to lagging video as measued by the V2A. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Control Mode | ||
| Navigation Path: | /High End Streaming/Bit Rate | |
| Function: | Specifies fixed/variable bit rate control for X75STR submodule. | |
| Valid Settings: | Variable, Fixed | |
| Default Setting: | Fixed | |
| VBR Quality | ||
| Navigation Path: | /High End Streaming/Bit Rate | |
| Function: | Specifies the X75STR submodule's output quality. | |
| Valid Range: | 1 to 10 | |
| Default Setting: | 5 | |
| Fixed Bit Rate | ||
| Navigation Path: | /High End Streaming/Bit Rate | |
| Function: | Specifies the bit rate of the X75STR submodule's output. | |
| Valid Settings: | 200 kbps, 300 kbps, 400 kbps, 500 kbps, 600 kbps, 700 kbps, 800 kbps, 900 kbps, 1 Mbps | |
| Default Setting: | 500 kbps | |
| Streaming IP | ||
| Navigation Path: | /High End Streaming/Network Settings | |
| Function: | Specifies the IP address of the X75STR submodule. | |
| Subnet Mask | ||
| Navigation Path: | /High End Streaming/Network Settings | |
| Function: | Specifies the subnet mask of the X75STR submodule. | |
| Gateway | ||
| Navigation Path: | /High End Streaming/Network Settings | |
| Function: | Specifies the gateway address of the X75STR submodule. | |
| Save IP | ||
| Navigation Path: | /High End Streaming/Network Settings | |
| Function: | Updates the X75STR submodule with the specified IP information. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Video Output | ||
| Navigation Path: | /High End Streaming | |
| Function: | Enables video output from X75STR submodule | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Audio Output | ||
| Navigation Path: | /High End Streaming | |
| Function: | Enables audio output from X75STR submodule | |
| Valid Settings: | Enable, Disable | |
| Default Setting: | Enable | |
| Machine Name | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Specifies the name of the unit, which will appear to remote controllers and remote networks. | |
| Description: | The factory default machine name can be renamed by the user using the front control panel or Pilot software. Having an unique machine name on a large control network allows the quick search capability and easy identification of a unit that needs to be controlled. | |
| DCN Address (Read Only) | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Reports the address at which the unit will be found on a DCN network (Digital Coaxial Network) | |
| Device IP | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Specifies the IP address of the unit. | |
| Subnet Mask | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Specifies the subnet mask of the unit. | |
| Gateway | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Specifies the gateway address of the unit. | |
| Save IP | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Updates the unit with the specified IP information. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| GPI-1 Function | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Selects which function should be triggered when a GPI pulse is received on the GPI-1 input connection of the Multi I/O breakout cable. | |
| Valid Settings: | Disabled, Freeze, Simulcast A/B, Voice-Over, Fav1, Fav2 | |
| Default Setting: | Disabled | |
| Description: | The GPI inputs are internally pulled HIGH. External contact closure to ground will trigger the assigned function set by the user. Disabled: no action will be taken. Freeze: Will freeze all the internal Frame Synchonizers memory. Simulcast A/B: switches between simulcast video source A and video source B. Voice-Over: Ramps down the program audio channels and mixes the voice-over channel to the program audio outputs. Fav1, Fav2 | |
| GPI-2 Function | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Selects which function should be triggered when a GPI pulse is received on the GPI-2 input connection of the Multi I/O breakout cable. | |
| Valid Settings: | Disabled, Freeze, Simulcast A/B, Voice-Over, Fav1, Fav2 | |
| Default Setting: | Disabled | |
| GPO 1 Function | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Selects the functionality of the GPI 1 Output Pulse connection of the Multi I/O breakout cable. | |
| Valid Settings: | Disabled, Bad Video Input, Voice-Over | |
| Default Setting: | Disabled | |
| GPO 2 Function | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Selects the functionality of the GPI 2 Output Pulse connection of the Multi I/O breakout cable. | |
| Valid Settings: | Disabled, Bad Video Input, Voice-Over | |
| Default Setting: | Disabled | |
| SD I/O Delay Source | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Selects the video source for the SDTV I/O Delay Pulse connection of the Multi I/O breakout cable. | |
| Valid Settings: | SD1, SD2, Analog | |
| Default Setting: | SD1 | |
| Description: | This varying width TTL pulse is a direct output from the selected path Frame Synchronizer output. The pulse width is directly proportional to the Frame Synchronizer's input to output propagation delay and some external audio synchronizer devices can use this pulse signal to auto-synchronize its audio signal to video. | |
| RS-422 Termination | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Specifies the termination of the RS-422 serial port. | |
| Valid Settings: | Hi-Z, 120R | |
| Default Setting: | Hi-Z | |
| Serial Port Type | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Selects the serial communication interface type. | |
| Valid Settings: | RS-232, RS-422 | |
| Default Setting: | RS-232 | |
| License Key | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Configures the soft options. | |
| Valid Settings: | On, Off | |
| Default Setting: | Off | |
| Soft Reboot | ||
| Navigation Path: | /System Config/Setup | |
| Function: | Reboots the unit. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Low Video Thresh | ||
| Navigation Path: | /System Config/Alarm Assert Setup | |
| Function: | Sets the alarm assertion threshold level for the low video signal. | |
| Valid Range: | 0.0 IRE to +75.0 IRE (for 525) 0.0 mV to 535.7 mV (for 625) |
|
| Default Setting: | 50.0 IRE (for 525) 350.0 mV (for 625) |
|
| Peak White Thresh | ||
| Navigation Path: | /System Config/Alarm Assert Setup | |
| Function: | Sets the alarm assertion threshold level for the peak white signal. | |
| Valid Range: | 80.0 IRE to 109.0 IRE (for 525) 560.0 mV to 763.1 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Peak Chroma Thresh | ||
| Navigation Path: | /System Config/Alarm Assert Setup | |
| Function: | Sets the alarm assertion threshold level for the peak chroma signal. | |
| Valid Range: | 80.0 IRE to 113.2 IRE (for 525) 560.0 mV to 792.2 mV (for 625) |
|
| Default Setting: | 100.0 IRE (for 525) 700.0 mV (for 625) |
|
| Analog Silence Lvl | ||
| Navigation Path: | /System Config/Alarm Assert Setup | |
| Function: | Sets the alarm assertion threshold level for the silence analog audio signal. | |
| Valid Range: | -138.5 dB to -0.0 dB | |
| Default Setting: | -60.0 dB | |
| Digital Silence Lvl | ||
| Navigation Path: | /System Config/Alarm Assert Setup | |
| Function: | Sets the alarm assertion threshold level for the silence digital audio signal. | |
| Valid Range: | -138.5 dB to -0.0 dB | |
| Default Setting: | -102.4 dB | |
| Enable All Alarms | ||
| Navigation Path: | /System Config/Alarm Assert Setup | |
| Function: | Enables/disables all device alarms. | |
| Valid Settings: | ---, Enable, Disable | |
| Default Setting: | --- | |
| Power Supply Present (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Returns the presence of the power supplies. | |
| Default Setting: | Single | |
| Power Supply Fail (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Returns the power supply status. | |
| Default Setting: | None | |
| Fan Status (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Returns the fan status. | |
| Default Setting: | None | |
| S/W Options (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Displays the installed software options. | |
| Serial Number (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Displays the unit's serial number. | |
| CORE FPGA Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version number and main PCB (ID) revision | |
| Audio Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version number and PCB (ID) revision | |
| Dolby Decoder Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Firmware version of Dolby Decoder. | |
| X75STR Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | X75STR software version. | |
| HD Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version number and PCB (ID) revision | |
| PQM Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version number and PCB (ID) revision | |
| A3D Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version number and PCB (ID) revision | |
| PROCESS Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version information | |
| SDIDV Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | FPGA version information | |
| SW Ver (Read Only) | ||
| Navigation Path: | /System Config/Status/Version Info | |
| Function: | Software version information | |
| Reset Factory Defaults | ||
| Navigation Path: | /System Config | |
| Function: | Restores the factory default settings. | |
| Valid Settings: | Yes, No | |
| Default Setting: | No | |
| Global Frame Rate | ||
| Navigation Path: | / | |
| Function: | Allows the selection of the operational standard. | |
| Valid Settings: | Auto, 29.97/59.94 Hz, 25/50 Hz | |
| Default Setting: | Auto | |
| SD Operating Std (Read Only) | ||
| Navigation Path: | / | |
| Function: | Current SD video standard | |
| Default Setting: | 525 | |
| HD Output Std (Read Only) | ||
| Navigation Path: | / | |
| Function: | Current HD output video standard | |
| Default Setting: | --- | |