# Take this and send to terminal or copy/paste from RVON 1 Test ONLY!!!
# xconn 0 1 1 cross connects channels 0 and 1
# xconn 0 0 1 cross connects channel 0 back to itself
# xconn x y 0 turns off cross connection
dbgcmd
cc dnld 0 0
cc dnld 1 0
cc assoc 0 0 0
cc assoc 1 0 1
cc sig_proto 0 fxs
cc sig_proto 1 fxs
cc open 0 0
cc open 1 0
cc voice 0
cc voice 1
cc xconn 0 0 1
cc xconn 1 1 1
cc ec 0 off
cc ec 1 off


#stop 1st paste here; test microphone input.
#start 2nd paste below test scale output.

cc xconn 0 0 0
cc ton 0 1 200 -100 100 25 2 0 1
cc ton 0 1 400 -100 100 25 2 0 1
cc ton 0 1 600 -100 100 25 2 0 1
cc ton 0 1 800 -100 100 25 2 0 1
cc ton 0 1 1000 -100 100 25 2 0 1
cc ton 0 1 1200 -100 100 25 2 0 1
cc ton 0 1 1400 -100 100 25 2 0 1
cc ton 0 1 1600 -100 100 25 2 0 1