RVON-C, version 2.1.4
---------------------

Included Files:
---------------

Release Notes:    readme.txt
Main application: rvonc.bib
Boot code:        adam2EB.bin
Utilities:	  abortos, applodr, aupdater, cmp, cp, defrag, ftp, info, 
                  printenv, rm, setenv, unsetenv


Upgrade Procedure
-----------------

Normally, a new version of the main application (rvonc.bib) would be installed 
simply by  downloading it from RVONedit or AZedit.  However, it may
occassionally be necessary to replace the boot code (adam2EB.bin) and/or the
onboard utilities, which requires the use of the RVONFILE utility.  


New in version 2.1.4
--------------------

Make sure there is enough free flash space to download new code image.

Ethernet settings and extended pass through settings exchanged with Cronus MC.
 

New in version 2.1.2
--------------------

Support for RVON-16.

Improved Ethernet auto-negotiation.


New in version 2.0.0
--------------------

DIP 4 resets authentication table to default user names and passwords.

Changes to Telnet access rights take place on activation (no reboot required).

Unsent changes made via Telnet are aborted after two minutes of inactivity.

Sending changes from RVONedit gets "No Sessions" if changes pending via Telnet.

Sending device IP info only causes reboot if something actually changes.

Added SNMP support.


New in version 1.1.0
--------------------

Support for RVONedit.

Added device and channel descriptions.

Made VAD thresholds settable on a per-channel basis. (Previously, there was
one VAD threshold for all channels.)


New in version 1.0.0
--------------------

Initial release of the RVON-C firmware.

NOTE: Requires:
      - RVON-8  V1.2.0 or later, (V1.3.0 or later recommended)
      - RVON-IO V1.2.0 or later.
      - RVON-1  V1.1.0 or later.