<Setup Manual> as of 2015/01/06

Upgrading "#7 to #9" and "#9 to #13" should be done step by step.

========== STEP 1 ==========

1.1 Preparation
    a) connecting devices to the ethernet switch.
    b) connecting AC power.
    c) power on SCS. (plug ether cable into LAN1.)
    d) power on SIU.
    e) power on HUB. (waiting for HUB to ready for PoE (5 min))
    f) PANELs will be powered on automatically by PoE.

1.2 Setup the line ID with XPP manually.

    a) login to SCS(192.168.111.1) via ssh protocol using any terminal software.

        user account : setup
        pass word    : sjx30260

    b) The menu appears after login.

        Switcher system Control Station Management Utility (V0.10)
        ----------------------------------------------------------------
           1. Timezone setting
           2. Clock adjust
           3. Network setting
           4. Device information
           5. Factory defaults
           6. Install verify
           7. SNMP setting
           q. Quit
        ==>

    c) input the hidden menu key "n".

        ==>n
        === xpp Version:V1.00#7 $Id: xpp 2587 2014-11-27 09:31:47Z nomura $ ===

    d) press the return key and then, the menu of XPP appears.

        XPP> (press return key)
        c : Clear old information
        h : Help (This is)
        l : List devices (order by GID)
        p : Ping to Panel/Menu(No)
        r : Reboot panels ( r GID [UID [LID]] )
        s : Set parameter of Panel/Menu (s No GID UID LID)
        u : Update of devices information
        x : eXecute local command (x No|MAC Command-number)
        q : Quit
        XPP>

    e) show the list devices using the xpp cmd "l".

        XPP> l

        +--+--+--+--+--------+-----------------+---------------+---------------+------
        |No| G| U| L| Device |       MAC       |  IP(MVS)      |   IP(local)   |check
        +--+--+--+--+--------+-----------------+---------------+---------------+------
        | 1| 0| 0| 0| SCS/Log|00:01:29:54:ab:52|               |192.168.111.1  |
        | 2| 0| 0| 0|   Panel|3c:07:71:9f:74:75|               |192.168.111.132|0 sec
        | 3| 0| 0| 0|   Panel|3c:07:71:9f:75:11|               |192.168.111.133|0 sec
        | 4| 0| 0| 0|   Panel|3c:07:71:9f:75:22|               |192.168.111.129|0 sec
        | 5| 0| 0| 0|   Panel|3c:07:71:9f:75:23|               |192.168.111.135|0 sec
        | 6| 0| 0| 0|   Panel|3c:07:71:9f:75:24|               |192.168.111.130|0 sec
        | 7| 0| 0| 0|   Panel|3c:07:71:9f:75:25|               |192.168.111.131|0 sec
        +--+--+--+--+--------+-----------------+---------------+---------------+------
        | 8| 1| 1| 0|    Menu|3c:07:71:9f:75:2c|10.129.1.1     |192.168.111.134|0 sec
        |  | 1| 1| 0|    Proc|00:00:cc:10:45:5d|10.129.2.1     |               |0 sec
        |  | 1| 1| 0|     SIU|3c:07:71:9f:75:08|10.129.13.1    |               |0 sec
        +--+--+--+--+--------+-----------------+---------------+---------------+------

        No: using xpp command to assign a device
        G:  MVS Group ID
        U:  MVS Unit ID
        L:  MVS Line ID for PANEL. Run Level for SCS
        IP（local）: IP address by DHCP

    f) blink the module using the xpp cmd "x" and check which line is blinking.

        usage : x (No) (Cmd)
        XPP> x 2 2

        (if 1st row module blinks, you set 0 to the line ID.)
                                          ^^^
    g) set the line ID using the xpp cmd "s"

        usage : s (No) (G) (U) (L)
        XPP> s 2 1 1 0
                    ^^^
        (repeat the number of PANELs.)

        ================================================================================
        [EXAMPLE1]

            +-----+
            | Ext | L = 4
            +-----+
            +-----------------------+
            | AUX                   | L = 5
            +-----------------------+
            +-----------------------+-----+-----+-----+     (top, furthest)
            | 1st Row               |     |     |     | L = 0
            +-----------------------+-----+-----+-----+
            | 2nd Row               |     |     |     | L = 1
            +-----------------------+-----+-----+-----+
            | 3rd Row               |     |     |     | L = 2
            +-----------------------+-----+-----+-----+
            | 4th Row               |     |     |     | L = 3
            +-----------------------+-----+-----+-----+     (bottom, nearest))

        [EXAMPLE2]

            +-----+
            | Ext | L = 4
            +-----+
            +-----------------------+-----+-----+-----+     (top, furthest)
            | 1st Row               |     |     |     | L = 0
            +-----------------------+-----+-----+-----+
            | 2nd Row               |     |     |     | L = 1
            +-----------------------+-----+-----+-----+
            | 3rd Row               |     |     |     | L = 2
            +-----------------------+-----+-----+-----+     (bottom, nearest)

        <restriction of line ID>
            0 - 3 : M/E XPT module
            4 - 6 : AUX, Shotbox, etc
            7     : MENU
        ================================================================================

    e) show the list devices.

        XPP> l

        +--+--+--+--+--------+-----------------+---------------+---------------+------
        |No| G| U| L| Device |       MAC       |  IP(MVS)      |   IP(local)   |check
        +--+--+--+--+--------+-----------------+---------------+---------------+------
        | 1| 0| 0| 0| SCS/Log|00:01:29:54:ab:52|               |192.168.111.1  |
        +--+--+--+--+--------+-----------------+---------------+---------------+------
        | 2| 1| 1| 0|   Panel|3c:07:71:9f:75:23|10.129.14.1    |192.168.111.135|36 sec
        | 3| 1| 1| 0|    Menu|3c:07:71:9f:75:2c|10.129.1.1     |192.168.111.134|2 min
        | 4| 1| 1| 1|   Panel|3c:07:71:9f:75:24|10.129.14.17   |192.168.111.130|16 sec
        | 5| 1| 1| 2|   Panel|3c:07:71:9f:75:25|10.129.14.33   |192.168.111.131|1 sec
        | 6| 1| 1| 3|   Panel|3c:07:71:9f:75:22|10.129.14.49   |192.168.111.129|54 sec
        | 7| 1| 1| 5|   Panel|3c:07:71:9f:75:11|10.129.14.81   |192.168.111.133|1 min
        | 8| 1| 1| 6|   Panel|3c:07:71:9f:74:75|10.129.14.97   |192.168.111.132|1 min
        |  | 1| 1| 0|    Proc|00:00:cc:10:45:5d|10.129.2.1     |               |2 min
        |  | 1| 1| 0|     SIU|3c:07:71:9f:75:08|10.129.13.1    |               |2 min
        +--+--+--+--+--------+-----------------+---------------+---------------+------

    f) setup the line ID of menu. 
       (but  the number 7 of MENU isn't reflected in above view. I don't know why.)
         XPP> s 3 1 1 7
                      ^^ fixed number

    g) setup the run level of SCS.
         XPP> s 1 1 1 1
                      ^^ fixed number

    h) reset panels
        XPP> r 1 1 0
        XPP> r 1 1 1
        XPP> r 1 1 2
        XPP> r 1 1 3
        XPP> r 1 1 5
        XPP> r 1 1 6

    i) quit
        XPP> q

        ==> q

1.3 [V100_7 to V100_9] upgrade UI by MENU.
    a) upgrade UI by MENU. (title:MKS-X7000 Panel/Menu)
       (If error is occured, you ignore it and do next.)
    b) go to page of 9999 and reboot.

1.4 [V100_7 to V100_9] upgrade SCS by MENU.
    a) upgrade SCS by MENU.
    b) execute the system shutdown at HOME.
    c) unplug the power cable of SCS.
    d) pluge the power cable of SCS and press power switch.
    e) press the HOME button of MENU during 1sec.
       (SCS and MENU boot up)

1.5 [V100_7 to V100_9] upgrade the others.
    a) upgrade FPGA of MENU by MENU. (title:MKS-X7011 FPGA)
    b) upgrade the software of MENU(Recovery) by MENU.(title:MKS-X7011 Menu(Recovery))
    c) upgrade SIU(PNL1) by MENU.
    d) upgrade PANEL by MENU. (over 20 min.)
    e) Power OFF/ON SIU(PNL1).


========== STEP 2 ==========
(see the document "xpanel_update_6to9_hardware.pptx".)

2.1 SIU JTAG Update
    CADEC1  V1.00#07 -> V1.00#08
    CADEC2  V1.00#06 -> V1.00#08

2.2 PANEL PLD JTAG Update
    PLD V1.00#3 -> V1.00#9


========== STEP 3 ==========

3.1 upgrade V1.00#9 to V1.00#13
    a) upgrade SCS by MENU.
    b) upgrade SIU by MENU.
    c) Power OFF/ON SIU(PNL1).
    d) upgrade UI by MENU.
   (If error is occured, please reboot PANELs and try again.)