Please use the GUI to Update the firmware of your device:

1. Open the GUI and select the Update Tab (green arrow symbol on the bottom right).
2. Click the Open File Button ("...") and select the "03 Update_firmware" folder from this release package
3. Click "Start", the process will take several minutes.

After the update the camera will restart automatically, this might take over a minute. The GUI will then
try to reconnect with the camera. In some cases this might not be possible (because the camera had to be
reset to default settings and can not be reached on the old com port). In those cases the Connect Dialog
will come up, click "Auto-Detection" or manually connect as usual.

If for some reason the above method fails, or the camera is stuck in bootloader mode (status LED pulses
red), use the "update_firmware.bat" script from the "03 Update_firmware" folder. Remember to change
the "COM_PORT" and "RS485_ID" parameters to your current values.