========================
LTV Old-To-New Converter
========================

Converts old-format LTV files to the new format required by Build 30 and higher.

Altitude hardware is not required.


To convert a single file:
-------------------------
Enter the source filename in the Input editbox.  Enter a new filename in the Output editbox, or alternatively enter a directory name and the new file will be created with the same name as the original in this directory.

To convert multiple files:
--------------------------
Enter either a directory name (e.g. "C:\LtvFiles") or a wildcard specification (e.g. "C:\LtvFiles\Anim*.ltv") in the Input editbox.  Enter a destination directory in the Output editbox.  Note that the program does *not* recurse subdirectories.  If you are running the program unattended I would recommend turning off the "Stop on error" checkbox.


Note that if you have the hardware installed with Build 30 (or higher) drivers, you can start previewing a new LTV file as it is still being generated.  Just right-click over the file and bring up Properties and you can play it, scrub it, etc.