710624Z Rev D *---------------------------------------------------------------------------------* * * * -=-=-=-=- C L E A R - C O M Intercom Systems -=-=-=-=- * * * *---------------------------------------------------------------------------------* Part # Description Rev Dev Date Chksum Device Eco *---------------------------------------------------------------------------------* 710624Z Eclipse Firmware 1.0 B 03/31/04 7265 XC9572 3435 D C 01-AUG-05 9411 XC9572 ? *---------------------------------------------------------------------------------* This Zip contains sources for U5 on Clearcom 710593 Config-200 Eclipse rear connector card. The raw part that this code opeartes in is a Xilinx XC9572 This part operates as a serial to parallel and parallel to serial converter allowing serial data on the gpi/rly interface to connect with the parallel IO out of the config rear card. The revision of the design is C. Changes from Revision A to Revision B are to modify the timing of the sampling of the GPIN pins so that they are reliably sampled whenever the SPI bus is deselected. Changes from revision B to Revision C are simply to swap the ethernet LED pins so that port1 now lights LEDs on port 1 and port 2 Lights LEDS on port 2. This corrects an error in the previous version. This design was created using Xilinx ISE v6.3.03i Checksum of the binary file is: 9411 This code is stored within and runs on U5, a 481145 CPLD on the 710593 Config Rear Card.