Instructions:
- Disable your Firewall on Windows PC
    Remember to re-enable, or create rule to allow tftpd32.exe
- Launch the included version of tftpd32.exe
- Connect the panel's "Serial" connection to a Windows PC running Hyperterminal
    Standard 115200 8N1 settings
- Also connect "Ethernet A" to a switch on the same network as Windows PC
- Modify paneltype, serverip, ipaddr, and netmask in Step 2
    paneltype = cp1040e, cp2272e or cp1024e
    serverip = Windows machine
    ipaddr = any available IP in your subnet
    netmask = netmask of Windows machine
- For each step from 1-7, the SINGLE line has to be copied into Hyperterminal exactly

Step 1)
pgm_fpga && nand erase clean 680000 && reset

Step 2)
setenv paneltype cp1040e && setenv serverip 10.99.22.110 && setenv ipaddr 10.99.22.168 && setenv netmask 255.255.255.0 && setenv bootfile primary-multi-$paneltype-production_2.4.0-MICRON.img

Step 3)
setenv app_addr 680000 && setenv app_size 3000000 && setenv rescue_addr 3e80000 && setenv rescue_size c00000 && setenv fileaddr 85000000

Step 4)
mw.b $fileaddr ff $app_size && tftp && nand write $fileaddr $app_addr $app_size && mw.b $fileaddr ff $rescue_size && setenv bootfile recovery-multi-$paneltype-production_2.4.0-MICRON.img && tftp && nand write $fileaddr $rescue_addr $rescue_size

Step 5)
setenv bootrescue 'nand read $fileaddr $rescue_addr $rescue_size && bootm' && setenv bootapp 'nand read $fileaddr $app_addr $app_size && bootm'

Step 6)
setenv bootargs console=ttyS0,115200n8 panic=5 mem=235M eth=$ethaddr ip=dhcp root=/dev/ram0 rw && setenv bootcmd 'dip; run bootapp; run bootrescue' && setenv bootdelay 1 && saveenv

Step 7)
setenv appimg2_size && setenv appimg2_addr && setenv serverip && setenv ipaddr && setenv netmask && setenv bootfile && setenv filesize && setenv bootflash && setenv appimg_addr && setenv appimg_size && setenv paneltype && saveenv

Step 8)
Physically power cycle the panel

Step 9)
Enter setup menu, set IP address of panel

Step 10)
Re-install Latest general release ECO firmware using the web interface