********************************************************
*  This firmware is for the following product:         *
*------------------------------------------------------*
*  5601MSC                                             *
********************************************************

version 1v2_73  (December 23, 2011)
--------------------------------------------------------
Resolved GPS and Genlock issues that occur after 24 days, 20 hours, 31 minutes 24 seconds of operation.
Resolved LTC and VITC synchronization issue.
Colour phase now correct in LTC and VITC
Static IP now accepts broadcast packets.  (Discovery packets)
Added SMPTE bars to 525 test signals 
Fonts now center justified (characters)
Resolved the reboot issue after getting ATG standard change.
Resolved the storage of calibration issue.
Added OSD message to all 6 SDI TG
TG’s OSDs messages are now 16 characters.
Sample structure selection added to SDI test generators.
Fixed large fonts issue. Large fonts now work.
Resolved SDI timing issue. SDI phases now calibrated.
Corrected packet IDs in SDI.
Added additional test signals to SDI TG
Added a delay after scrolling to start of a long signal name.
Analogue Audio events now functional.
Ethernet now works through a gateway.
Resolved cross talk phasing control issue between SD525i/59.94 and HD1080i/59.94
Resolved front/rear fan status issue on left power supply.
Resolved menu visibility issue of 10Mhz, Worclock, Global Pedestal and Presets.
Resolved “GPO Audio on” issue. Now it’s activating GPO output.

version 1v2_27  (Sept 13, 2010)
--------------------------------------------------------
LTC and VITC outputs are now correct in timing.
Syncro now works.
Global phasing added.
Modem fixes.
GPO's now report GPS status.
Menu access control now works.
Presets work correctly.
Additional status displays.
Added 10 field pulse
Added AES controls
Added Global pedestal.
Fixed menus in multiple places.