***************************************************************
**  v3.5
**  PESA Perc2000 V3.5 Release  (Oct 2010) 
***************************************************************

1) Fixed a bug that caused the active controller to switch to
   the standby if the connection was lost to the active.


***************************************************************
**  v3.4
**  PESA Perc2000 V3.4 Release  (Sep 2010) 
***************************************************************

1) Added support for user selection of sorting the name lists
   for remote control panels. Added support for embedding and
   deembedding of timecode with Mux/Demux boards. Added support
   for MADI I/O and changed the control and display of MADI.


***************************************************************
**  v3.3
**  PESA Perc2000 V3.3 Release  (Mar 2010) 
***************************************************************

1) Added capabilities for Incremental Add/Edit of the
   configuration.


***************************************************************
**  v3.2
**  PESA Perc2000 V3.2 Release  (Feb 2010) 
***************************************************************

1) Implemented bug fix for crash caused when uploading a config
   that used the smaller structure size from V3.0.
2) Fixed bug where P1k's could not have their flash updated
   reliably.
3) Fixed a bug that prevented MADI boards from displaying or
   allowing control of their settings information.


***************************************************************
**  v3.1
**  PESA Perc2000 V3.1 Release  (Aug 2009) 
***************************************************************

1) Added the ability to recognize and configure the Mux and Demux
   boards.
2) Added the capabilities to flash the 3G I/O boards and the
   frame controller board.
3) Added RCP-MB2 and RCP-PVPG control panels.
4) Changed the application icon to use the new PESA icon.


***************************************************************
**  v3.0
**  QuStream Perc2000 V3.0 Release  (May. 2009) 
***************************************************************

1) Added capability to handle dual system controllers. When a
   changeover occurs, the connected to display will show the IP
   address of the newly active system controller.
2) Added DRS hardware config screen to facilitate changes in the
   way the ports on the DXE are handled. They now have to be
   configured where they were fixed before.
3) Added support for 64 I/O boards in the DRS. Modified the audio
   parameters screen to handle boards that have inputs as well
   as outputs.
4) Modified the way DRS is viewed in Maint/Diagnostics area to
   more closely relate to a system view of the devices.
5) Added the system controllers to the Maint/Diagnostics area.
6) Modified the Matrix Preset screen to add a control to override
   locks when a preset is sent to the system controller. If the
   override is selected, locked outputs will be unlocked, switched
   and will be locked again only if the preset has the lock in it.
7) The IP config screen now changes IP address by the base IP.
   the command to change IP will automatically go the both system
   controllers or to all P1k's in the system.
8) An error log has been added. At this point it will only log
   dual changeovers in the P2k and P1k, and card failures, fan
   failures and temperature errors in the DRS. The log button
   on the toolbar will turn red when an entry is added to the log.
   Double click on the red button and the log will be displayed.
   When the log display is closed, the button will be green again.


***************************************************************
**  v2.2
**  QuStream Perc2000 V2.2 Release  (Jan. 2009) 
***************************************************************

1) Added RCP-48X and RCP-241 control panels.


***************************************************************
**  v2.1
**  QuStream Perc2000 V2.1 Release  (Nov. 2007) 
***************************************************************

1) Added ability to correctly display and status DRS timecode I/O
   boards.
2) Fixed a bug in Flash Update Screen where the entity and module
   data got out of sync with the device data at initial display of
   the screen.
3) Corrected the P2 command used to initiate a dual changeover from
   the GUI, as the wrong command was initially implemented. This
   change does require that the PERC1000 have version 2.1 as well.
   The GUI will work with PERC1000 V2.0 in all respects except sending
   the command to change the active state.
4) Modified "Stereo Remedies" dropdown in DRS audio setup screens,
   to include a "L - R" selection. Also changed "Sum" item to "L + R".


***************************************************************
**  v2.0
**  QuStream Perc2000 V2.0 Release  (Oct. 2007) 
***************************************************************

1) Added adjustment screens for audio delay in DRS.
2) Added adjustment columns for pase invert and stereo remedies
   to audio settings screen in DRS.
3) Added diagnostic screen for fiber link status data in DRS.
4) Added capabilities to save/load audio data to/from a file in DRS.
5) Fixed the control buttons (Min, Max, & Exit) in WinXP.
6) Added the ability to set IP address, netmask, and default gateway
   for PERC1000's.
7) Numerous bug fixes in configuration editing screens.
NOTE: This version of the GUI requires that the PERC1000's in the DRS
have V2.0 software installed as well. If you try to look at PERC1000
with software version < V2.0, you will not be able to see the audio
data. You will be warned of the version incompatibility. In DRS, the
DXE and all I/O boards will require at least the following versions
in order to support new audio features described above:
DXE -           12.8
AES Input -     11.4
AES Output -    11.4
Analog Input -  11.3
Analog Output - 11.3


***************************************************************
**  v1.0
**  QuStream Perc2000 V1.0 Release  (June 2007) 
***************************************************************

Inital release.