Reading this file
Each section describes a release of AZedit.
The description includes any changes made since the previous release.
There are two types of entries (identified by their prefix):
NEW: indicates a new feature or enhancement to an existing feature.
FIX: indicates a problem or bug that was fixed in this release.
AZedit V5.2.2
NEW: Added support for ROAMEO device types.
NEW: Added support for DKP-3016 keypanel types.
NEW: Added support for intercoms that can return control to AZedit after sending changes but before saving to flash.
NEW: Added option on Send Changes dialog to allow AZedit to request immediate save to flash.
NEW: Added preference to hide/show enhanced trunking (TM#2).
NEW: Added alarm for flash write failures.
NEW: Swapped prefix for default alphas on SL and IFB-SL when more than 100 instances. (ie. S001 = SL #1, L001 = IFB-SL #1)
FIX: Improved validation of TM communication settings (especially when configuring enhanced trunking).
FIX: Support additional COM ports without having to enter COM port name as "\\.\COM11".
FIX: Don't allow Apply on TM Communication dialog if restricted.
FIX: Warn when no Ethernet sessions are available and enter FILE mode.
FIX: Partial Save of VOX info may not upload all information. Fixed.
FIX: Partial Save of IFB-SL info did not upload trunk tally flag. Fixed.
FIX: Don't activate the GO ONLINE button if no intercom is present (Ethernet).
FIX: More informative warning messages when the key icon or panel icon bitmap files are missing.
FIX: Make OMNEO Partner IP address read-only (only Partner Name can be edited).
FIX: Allow resizing of columns on Enhanced Tally grid.
FIX: Auto-exit the send progress dialog for Port Allocation changes if no errors occurred.
FIX: SERVER mode is supposed to be read-only but allowed changes on many advanced screens. Fixed.
FIX: Treat ZUS3 and CRON as default intercom names (like LOCL) to allow Default AZedit connections.
AZedit V5.2.1
NEW: Support KP-Series keypanels with RVON compatibility.
NEW: Added recognition of new TIF-ISDN keypanel type.
FIX: Improvements to real-time volume control slider mouse click behaviour.
FIX: Keypanel configuration dialog LCP encoder assignments for Both Speaker and Both Headsets did not work.
AZedit V5.2.0
NEW: Supports downloading license files to keypanels
NEW: Supports upload/view/edit/apply/save/load/send of keypanel configuration
NEW: Supports real-time control of keypanel speaker/headset/matrix/aux volumes
NEW: Supports real-time control of mic-mute, tone generator, and AFK state
NEW: Supports real-time control of crosspoint and party line gains
NEW: Supports enable/disable of mirror supervisor capablity for each port
NEW: Supports reporting mirror status for each port
NEW: Supports reporting AFK status for each port
NEW: Supports downloading screensaver bitmaps to keypanels
NEW: Supports downloading key and panel icon bitmaps to keypanels
NEW: Supports downloading chime audio files to keypanels
NEW: Supports KP-Series keypanels licensed for 8 OMNEO channels (8 input, 2 output)
NEW: Supports new UPL output action to hang-up TIF
NEW: Supports new keypanel alarm types: Incompatible EKP and Incompatible FPGA
NEW: Supports new intercom alarm types: Active MC Died and Standby Became Active
NEW: Supports simultaneous discovery of both OCP and OCA devices
NEW: Supports new keypanel types for DKP-4016 and KP-3016
NEW: Added context menu on crosspoint view to choose input or output alphas for port selection
FIX: Improved compatibility between older setup files and setup files with SIP Server info
FIX: Earlier versions of V5.x.x could create setup files with invalid text default colors
FIX: CTRL+T on keypanel view could toggle into key label mode (even if labels not enabled)
FIX: Improved performance of list control actions (especially with large lists)
FIX: AZedit did not show same crosspoint/PL gain volumes as keypanels below -48dB
FIX: PPL and PPLI are only valid on talk level 1
FIX: Debug terminal view now allows Paste operations
FIX: Don't allow Paste operation on KP Passwords dialog
AZedit V5.1.1
NEW: Supports separate edit restrictions for each SIP Server
NEW: Supports separate feature restrictions for SIP descriptions and configuration
FIX: V5.1.0 did not handle SIP descriptions and restrictions properly.
FIX: Context menu search was broken on several views.
AZedit V5.1.0
NEW: Support for multiple SIP servers and SIP server descriptions.
AZedit V5.0.2
FIX: Updated default settings and capabilities to be consistent with current intercom firmware.
FIX: Minor fixes to Partial Save pre-selection of changed items.
FIX: AZedit V5.0.x might continually warn about changes to intercom capabilities.
FIX: AZedit V5.0.x re-installer didn't respect existing registry settings for new directory locations.
FIX: AZedit V5.0.x un-installer might delete new directories and sampe icon files.
AZedit V5.0.1
FIX: Upload of keypanel debug information did not work for some ports.
FIX: Minor UI improvements to keypanel debug upload dialog.
FIX: Enhanced Tally definitions not initialized properly on File | New.
FIX: Partial save of Keypanel Data now includes Priority Call Volumes.
FIX: Partial save of Special Lists now includes Special List Relay definitions.
FIX: It was possible to edit Enhanced Tally characteristics in SERVER mode.
FIX: Minor UI improvements to Enhanced Tally view.
FIX: Status bar instance info not correct for Ethernet Link views.
FIX: Attempt to split/display 8-character alphas as keypanel could prevent entry of alphas with embedded spaces.
AZedit V5.0.0
NEW: Support for KP-4000 / KP-5000 series keypanels.
NEW: Support for configurable text color for key assignments.
NEW: Support for enhanced tallies and tally configuration.
NEW: Support for generating tallies via UPL.
NEW: Support for key overlay icons and panel tally icons.
NEW: Support for testing TIF port hook/ring status via UPL.
NEW: Support for testing keypanel Mic Mute status via UPL.
NEW: Support for configuring keypanels with priority call volume.
NEW: Supports alarm for excessive keypanel power-up requests (more than 4 per minute).
NEW: Supports alarm for excessive keypanel communication errors.
NEW: Supports alarm for keypanel babbling.
NEW: Supports alarm types for keypanel generated alarms.
NEW: Supports uploading debug information from keypanels
NEW: AZedit attempts to display 8-character alphas as keypanel would (on two rows).
FIX: Force upload of SIP Server line names when going online or reconnecting.
FIX: SIP controls were enabled for intercoms that didn't support SIP.
FIX: Retain UPL output parameter context if possible when changing output types.
FIX: Increased height of drop-down lists on UPL edit dialog for better visibility.
FIX: Context menu on KP view might not show Changes sub-menu, if only change was to VOX.
FIX: If you enter a domain name in static configuration for OMI card, you must also enter DNS IP address.
FIX: Tab order on OMI configuration dialog was incorrect and non-intuitive.
AZedit V4.7.0
NEW: Added support for VLink SIP Server, SIP Server RUDP link status, and Port/SIP Line associations.
NEW: Added support for displaying and editing second IP address for OMI card.
FIX: Improved OMNEO discovery process and detection of IP address changes.
FIX: Added a Refresh button to OMNEO browser to force refresh of discovery process.
FIX: Message timeouts during a download caused a 10 second pause in communications.
FIX: You can now use ALT+F12 to toggle between "Show All Alpha Sizes" and the preferred alpha size.
FIX: Key Assign Select dialog is now launched with keyboard focus in the alpha edit box.
FIX: Key Assign Select alpha list is now sorted alphabetically by default.
AZedit V4.6.3
FIX: In AZedit V4.5.4 and V4.6.1, if configured to view/edit only one alpha size, editing an alpha can incorrectly change all sizes, not just larger sizes.
FIX: In rare circumstances, some remote key assignments could get mapped to the wrong intercom number during File Load/Send operations.
FIX: Could not download RVON cards in ADAM-M frames.
FIX: AZedit could crash if intercom resized while showing the KP view where the port was an IFB output and the IFB warning was enabled.
FIX: RP-1000 was not supported in Keypanel View template mode.
AZedit V4.6.1
NEW: Support for TM-10K and trunking of up to 255 intercoms.
FIX: AZedit treated ADAM-M like ADAM-CS (for serial port selections and logging options).
FIX: AZedit could crash on keypanel colors view if the number of Assignment Groups was fewer than 12
FIX: DHCP Server configuration did not allow an empty Network Mask (even if range undefined).
AZedit V4.5.4
NEW: Allow alpha changes to ripple to larger alpha sizes and aliases even if they are not visible
NEW: AZedit now remembers the "Show Colors" mode on the keypanel view across a shutdown and restart.
FIX: Allow user to choose a network interface for device discovery at startup (even if only one interface available) - the user may decide not to enable device discovery.
FIX: Allow user to enable/disable device discovery interface warning messages (from Options | Preferences | Discovery)
FIX: Limit OMI device names to 20 characters.
FIX: I/O Gain request/set messages were too large for DBX systems (resulting in NAK's).
AZedit V4.5.1
NEW: Support for OMNEO devices (OMI cards and OKI enabled keypanels)
NEW: Support for conifguring DHCP Server in MCII-e
NEW: MADI reference clock option for NTSC/PAL now split into two options, one for NTSC, one for PAL
NEW: Resource description columns added to many views (PL, SL, IFB, ISO, RY, GPI In, IFB-SL, VOX, Trim, volume views).
NEW: Added ability to configure Ethernet settings for RVON devices
NEW: Added ability to configure second pass-through port settings for RVON-16 devices
FIX: Don't allow changing key states on Trunk ports
FIX: New alarms dialog could pop-up behind application if shown during splash screen (making application look like it was hung).
FIX: If the application was restored from the minimized state while a dialog was displayed, it would stop communicating with intercom.
FIX: Improved communication throughput by optimizing message sizes
FIX: Made combo box dropdown taller on Alpha Copy dialog (to show all choices)
FIX: Added hot keys for More and Less on Search and Replace dialog
AZedit V4.4.0
NEW: Support for 32- and 64-bit WinUSB drivers.
FIX: Resizing Wizard did not calculate number of BX per frame correctly in systems configured for Ring Wiring.
FIX: Improved handling of communication timeouts.
FIX: Improved handling of alarms after re-connecting.
FIX: Resizing Wizard would not let you enter more than 256 ports per frame manually (but would allow it via spin controls).
FIX: Display range of driven timeslots using same formatting as received timeslots.
FIX: Allow memory peek of 255 bytes for MCII-e in all frames of a TBX system.
AZedit V4.3.0
NEW: Support for Panel Party Lines in MCII-e and Cronus systems
NEW: Support for Ring Wiring mode for TBX systems
NEW: TBX link details shown on link status view (if Ring Wiring mode supported)
NEW: Support for up to 9 frames in Ring Wiring mode
NEW: Warn in Intercom Sizing Wizard when timeslots not available because of test audio
NEW: Show card description on TBX/DBX link status view
FIX: Removed option for non-existent frame type
FIX: Radio buttons can now show changes
FIX: Better handling of Radio button groups, focus and keyboard navigation
FIX: Improvements to tab order and control grouping on several dialogs
FIX: Ignore unknown configuration flags when checking for changes to intercom config
FIX: Detect changes in intercom configuration sooner, and display notification
FIX: Don't allow changes to expansion panel key assignments on trunk ports
FIX: Initial vertical space calculated incorrectly when printing keypanel view
FIX: Improved printing on keypanel view for Unicode alphas
FIX: Didn't re-sort XPT view on navigation (forward/back, or context menu)
FIX: Don't show "Untitled" in the title bar after reconfiguring if still ONLINE
FIX: Fill in partner IP address on communications dialog if known
FIX: Don't include deprecated Lookup Alphas in duplicate alpha check
FIX: Don't include Auto-Dial alphas in duplicate alpha check in English build (not key assignments)
FIX: Improved handling of context detection for RVON configuration and status dialogs
FIX: Mapping of capabilities to message types was incorrect for MADI and RVON card types
FIX: Suppress default alphas didn't work with Unicode alphas
FIX: It was possible to download firmware to incompatible card types
FIX: Unknown alarm types might be hidden (or shown) by mistake
FIX: Discard alarms on lost contact with intercom (prevents a refresh problem on reconnect)
FIX: Don't show connected frame in status bar if not ONLINE
FIX: Allow frame mapping table browse for single controller on right side
FIX: English build of AZedit now understands Japanese config options and preserves them (but does not let you edit them).
FIX: Card status view did not refresh card type correctly
AZedit V4.2.0
NEW: Support for up to 128 keys per port
NEW: Support for IFB SL tallies over trunking
NEW: Trunk inspect view now indicates trunks that are out-of-service or in maintenance mode
FIX: Selective search and replace did not work properly.
FIX: AZedit did not handle blank key labels properly.
FIX: Auto-dial context menu should only include the local scroll enable
FIX: Auto-dial context menu should not include the search option in non-Japanese builds
FIX: Don't stay on IO description view if intercom does not support IO descriptions.
FIX: Did not handle changing number of I/O cards and frames on file open.
FIX: Port Allocation Table maps need to be re-calculated after file open.
FIX: Auto-Dial and Assignment Group alphas were mistakenly allowed to be entered as key assignment alphas.
AZedit V4.1.1
NEW: UPL input condition to test keypanel present on a port.
FIX: Intercom Sizing Wizard started on wrong page for DBX systems.
FIX: Partial save of IFB-SL did not force upload of current IFB-SL data.
FIX: V4.1.0 did not save IFBs to setup file.
FIX: Context menu for unhiding of hidden alarm types displayed incorrect alarm type description.
FIX: Don't save Unicode key labels if Unicode not supported by intercom.
FIX: Possible out-of-bounds memory access on Status view if changing intercoms, or intercom resized.
FIX: Did not show which frame AZedit connected to in status bar if intercom name was LOCL
FIX: Default port allocation not correct for Zeus-III intercoms (an intercom with port count that was a non-multiple of 8).
FIX: Keypanel type configuration for KP812-K hardware allowed user to specify an EKP after specifying NONE.
FIX: UPL output action "inform CLP" is a "one-shot" action, not a "maintained" action.
FIX: Updated splash screen for consistency with other Bosch applications.
AZedit V4.1.0
NEW: Support for configuring communications for two TM-2000s
NEW: Reports when a port is defined as a trunk by both TM-2000s.
NEW: Support for KP-32 Classic with Cyrillic display
NEW: Support for KP 412 and KP 612 Unicode modes
NEW: Keypanel template for KP 32 CLD and KP 32 in Unicode mode
NEW: Alpha option to allow lowercase letters now separate option for Unicode or non-Unicode alphas
FIX: Renamed many keypanel types for more consistency with Bosch product catalog naming conventions
FIX: Keypanel type conflict resolution button now sets user type to UNKNOWN, rather than to reported type.
FIX: Keypanel type conflict resolution button is now hidden if restricted.
FIX: Zeus-III Lite now called Zeus-III LE
FIX: When set to suppress default alphas, only consider current alpha size.
FIX: CTRL+TAB view toggle menu item should be in View menu, not Edit menu
FIX: Intercom configuration wizard was broken for single frame ADAM systems
FIX: Intercom configuration stored to file was incomplete (caused ResEdit to be unable to import AZedit setup file)
FIX: Could not enter backslash character into COM port edit box in some instances.
FIX: Alpha option to limit non-Unicode alphas to the original KP-12 character set now only available in Japanese build
AZedit V4.0.0
NEW: AZedit is now a Unicode build for both English and Japanese versions
NEW: Configure whether intercom supports Unicode alphas
NEW: Support for KP812-U and KP-12/4U keypanel types
NEW: Alpha option to allow lowercase alphas (not supported on KP9x keypanels)
NEW: Alpha option to limit character set to original KP-12 character set
NEW: Alpha option to force half-width ASCII characters to full-width Unicode characters
FIX: Downloading RVON-1/IO firmware did not work in V3.9.0
AZedit V3.9.0
NEW: Support for the Port Allocation Table
NEW: Indicate when port is unallocated (not assigned to an I/O card) on the keypanel and keypanel status and version views
NEW: Support for MADI-16+ cards with more than 16 ports
NEW: Context menu support for downloading MADI license files
NEW: Support for the ADAM-M frame type
NEW: Configure frame types from within Intercom Sizing Wizard
NEW: Configure number of ports per frame within Intercom Sizing Wizard
NEW: Can no longer size intercom by selecting number of ports (must select number of frames)
NEW: Supports KP 32 CLD with separate CWW key
NEW: Support for the ZEUS-III Lite intercom type
NEW: Support for IFB tallies across trunking
NEW: Display the frame number to which AZedit is connected in the status bar after the intercom name
NEW: Allow swapping left/right frames in Frame Mapping Table
NEW: Display information on remote alpha pool size and usage when testing new intercom size
NEW: Resizing Wizard allows single frame intercom with up to 880 ports
NEW: Resizing Wizard allows multi-frame intercom with up to 1000 ports (intercom may support less)
NEW: Determine alpha size for keypanel by how keypanel asks for power-up
NEW: Advanced preference required to enable changes to TM communication settings
NEW: Warning dialog before sending changes to TM communication settings
FIX: Listen key assignment alphas not recognized in FILE mode if Input Alphas not enabled and working with setup files saved with V3.8.0
FIX: AZedit could crash (and disable intercom communications) if connected to a single frame intercom with more than about 500 ports
FIX: Don't allow access to MADI views if intercom has no I/O cards (ie. ZEUS)
FIX: Don't allow resizing MADI view top row height.
FIX: V3.8.0 displayed two columns of port numbers even on intercoms that don't support AIO-16
FIX: MADI pass-through supports RS-485, not RS-422
FIX: Don't stay on status views if no longer ONLINE
FIX: Show only MADI cards by default on MADI configuration view
FIX: Don't allow "Show Color" mode if intercom doesn't support keypanel colors.
FIX: Key assignment colors sometimes not shown properly in "Show Color" mode
FIX: Improved editing of UPL statements involving date/time or counters (again).
FIX: Alarm view did not refresh when hiding or unhiding alarms
FIX: Opening an older setup file in FILE mode could retain new capabilities from previously connected ONLINE intercom
FIX: Download to RVON-16 in frame 2+ failed with "incorrect slot" message.
AZedit V3.8.0
NEW: Support for MADI-16 cards.
NEW: Support for TM-2000 connection via Ethernet.
NEW: Support for Ethernet Link status views.
FIX: AZedit could hang if the Alarm Notification dialog is displayed while the application is minimized.
FIX: AZedit could GPF if dragging non-AZedit data onto application.
FIX: AZedit could GPF if UPL load file found filename and path larger than 64 bytes.
FIX: Changing COM port to NUL could halt communications (requiring restart).
FIX: AZedit V3.7.1 would not run under Windows 2000.
FIX: Off-by-one in selection of remote intercom in AZedit V3.7.1.
FIX: TBX Link view not accessible in AZedit V3.7.1.
FIX: AZedit would sometimes show ? for MC slot on status view (and would not refresh).
FIX: Search for key assignment might not highlight correct key.
FIX: Search for key assignment dialog might clear default alphas from list when selecting replace.
FIX: The Goto Keypanel search function now finds the next matching assignment on the same panel (if there is one).
FIX: Current alpha size now indicated on alpha view when only one size is shown.
FIX: Trunk Inspect view sizing modified to fit better on screen.
FIX: Printing LKP setups now shows Input Alphas.
FIX: Don't resort list during view refresh.
FIX: Added help IDs on the frame mapping dialog.
FIX: Added help IDs on keypanel colour view.
FIX: SERVER mode now shows read-only on the keypanel colour view.
FIX: Allow AZedit in SERVER mode to update intercom date/time.
FIX: Have AZedit force release of exclusive control when going ONLINE.
FIX: Include support for Auto-Dial key assignment colours in Japanese version.
FIX: Added a toolbar button for the keypanel color view.
FIX: Keypanel view did not show correct colors for key assignments when no setup page assigned.
FIX: Save toolbar state to registry after user customization.
FIX: Improved editing of UPL statements involving date/time or counters.
FIX: Improved display of frame mapping dialog.
FIX: Don't create empty setup file sections for features the intercom does not support.
AZedit V3.7.1
NEW: Support Vista-style File Dialogs.
NEW: Support device discovery broadcasting under Vista.
NEW: Support for drag and drop on colors view.
NEW: Support for sorting the grid on colors view.
NEW: Support for clearing changes on colors view.
NEW: Support for context menu on colors view.
FIX: Tried to request keypanel colors on intercoms that don't support them.
FIX: Loading a Cronus setup file with keypanel colors would fail.
FIX: Default colors for talk and listen indicators were reversed.
FIX: Key Assignment tab on colors view failed to handle possibility of 0-sized resource.
FIX: Display glitch on colors view when scrolled after changing font size.
FIX: Relay definitions sometimes not loaded correctly from file.
FIX: Switch view if current view is unsupported when capabilities change.
FIX: Improved refresh (prevent NAKs on supported views when capabilities change).
FIX: Could crash when changing between DBX links and status screens.
FIX: UPL description field corrupted in Japanese build.
FIX: Undo optimization (don't store multiple copies of same resource).
FIX: Crosspoint inspect results for keypanel privacy were not displayed correctly.
FIX: Item number might get refreshed on some views even while being edited.
FIX: Do not write old keypanel configuration section to setup files (obsolete).
FIX: Improve startup message sequencing when going ONLINE or changing intercoms.
FIX: Could sometimes incorrectly get a "COM Port Not Available" message when changing communication parameters.
FIX: Refactoring to remove obsolete code.
AZedit V3.7.0
NEW: Support for editing keypanel colors
NEW: Support for configuring ZEUS-III 2-wire ports
NEW: Support for alarm notification dialog
FIX: Default names for ZEUS-III 2-wire ports are CH-A and CH-B
FIX: Alarm view might not refresh after clearing an alarm
FIX: RVON configuration dialog incorrectly handled marking of trunk ports for upper 8 ports of RVON-16
FIX: Allow deleting current user name from non-current intercom
FIX: Improved AZedit file send (reducing number of messages required)
FIX: Improvements to list column widths and sorting on Partial Save dialog
FIX: Debug terminal view did not scroll properly under Windows Vista
FIX: AZedit could deadlock on debug terminal view
FIX: Not enough room to show keypanel type info on keypanel view
AZedit V3.6.3
NEW: Support for Vox on ZEUS-III intercoms
NEW: Support for more than 2000 resources per intercom
NEW: Support for up to 999 instances of most resource types (PL, IFB, SL, etc...)
FIX: List column widths were sometimes not saved after being resized.
FIX: CTRL+X (cut) operation on block of selected keys on keypanel view always cut from setup page one, even if another page selected
FIX: Improved setup page assignment dialog to show when setup pages assigned to non-existent hardware panels.
FIX: Key assignment grid sort mode is now remembered between application launches
FIX: Key assignment grid position now remembered correctly across multiple monitors.
FIX: Make sure off-screen windows are visible (if second monitor is removed)
FIX: Assigning IFB SL to key auto-sets latch disable (like IFB) if that option is enabled.
FIX: Force ID request when going online, changing intercoms, or changing frames.
FIX: Hide search results dialog when changing intercom/user, or when going online or entering file mode
FIX: AZedit could abort if exclusive control lost while sending changes
FIX: Send changes would get stuck if Ethernet session terminated while activating changes
FIX: Firmware download would get stuck if lost contact with intercom while sending firmware
FIX: Lists were still not indexed properly
FIX: Code refactoring and optimizations
AZedit V3.6.2 (Unicode)
NEW: Option to allow half-width Unicode characters in alphas.
NEW: Option to allow lowercase characters in alphas.
NEW: Support for downloading Kanji font to KP 32 CLD family of keypanels.
FIX: Ignore ASCII and Katakana character width when matching alphas.
AZedit V3.6.2
NEW: Support for Arbitrary Crosspoints.
NEW: Check availability of download buffer in each frame before beginning download (and warn if not available).
NEW: Upgraded development environment to Microsoft Visual Studio 2008 (from Visual Studio 2005).
FIX: Show long crosspoint inspect results on two lines.
FIX: Don't check Lookup alphas for duplicates if not enabled.
FIX: Kill splash screen if still visible when quitting application.
FIX: Better alarm description text.
FIX: Alarm view item selection didn't work properly if some alarms were hidden.
FIX: Remove obsolete alarm configuration menu item.
FIX: Browse for Intercom tree was not wide enough when scroll bars were enabled.
FIX: Default intercom size for single frame is now 272 ports.
FIX: Restrictions for alarm operations not implemented properly.
FIX: Restrictions for GPIO-16 view not implemented properly.
FIX: Removed some obsolete code for IFB Dim.
FIX: Added support for ZEUS-III boot loader download.
FIX: ZEUS-III supports J1.
AZedit V3.6.1
NEW: Support for Centralized Auto-Dials
NEW: Support for enhanced Assignment Groups
FIX: Did not re-allocate ports to cards after Base16 flags in the frame mapping table were changed.
FIX: Support non-null-terminated version strings from VKP
FIX: Lists with hidden items (ie. show non-unity only) were not indexed properly
FIX: Don't show alarm changed indicator in status bar if no alarms to report
FIX: Allow alarms to be sorted by date/time.
FIX: Enumeration of multi-frame (non-autonomous) intercoms incorrectly assigned frame numbers
FIX: Uploading of alarms failed if more then 25 alarms in any one frame
FIX: Uploading of alarms failed if new alarm generated during upload
AZedit V3.6.0
NEW: Support for uploading and displaying alarms generated by the intercom.
NEW: Support for uploading debug information from the intercom.
NEW: Support for connecting to any frame of a multi-frame autonomous intercom.
NEW: Support for automatically connecting to any frame of a multi-frame autonomous intercom.
NEW: Display connected users per-frame, or for all frames.
NEW: Configure logging for local frame or for all frames globally.
NEW: Intercom configuration option to force autonomous mode if no audio links up.
NEW: Group intercom frames by name when browsing for intercoms.
NEW: Support for the ZEUS-III intercom type.
NEW: Support for 2-Wire ports on ZEUS-III (including UPL tests/actions).
NEW: Keypanel template support for KP 12 CLD and DKP 16 CLD.
FIX: Don't read key labels from setup file if the port number is not valid in current intercom.
FIX: Keep machine status separately for each machine type.
FIX: Improved boundary checking on resource number indices.
FIX: Improved refresh and sorting on Trunk Ports view.
FIX: Don't allow TBX link view when intercom has only one frame.
FIX: Sort users on connected users dialog.
FIX: Prompted to remove standby TBX, not MCII-e, during intercom resizing.
FIX: Did not allow 8 intercom frames during intercom resizing in FILE mode.
FIX: Improvements to editing of Frame Mapping table.
FIX: Support for GPIO-16 with multi-frame autonomous intercoms.
FIX: Go to keypanel from search dialog didn't always select correct setup page.
FIX: Improved sorting and selection on list controls.
FIX: Improved printing from list views.
FIX: Support unknown crosspoint status on inspect if target frame is not talking.
AZedit V3.5.1
FIX: AZedit incorrectly determined the number of TBX cards per frame.
FIX: Frame mapping table dialog did not always immediately broadcast to detect controllers.
FIX: Renamed the frame mapping table checkbox "Accept frame mapping table from other frames".
FIX: Selecting the frame mapping table checkbox prevented the user from then deselecting the option.
FIX: AZedit could sometimes stop talking to an intercom via Ethernet when the active controller was reset.
FIX: Improved firmware download to master controllers (allows them to acknowledge end of transfer).
FIX: Small improvements to keypanel view for KP 32 CLD and EKP 32 CLD keypanels.
AZedit V3.5.0
NEW: Added initial support for multi-frame autonomous intercoms.
NEW: Intercom sizing wizard supports TBX systems.
NEW: Support requesting UIO status in all frames of a multi-frame autonomous intercom.
NEW: Support new keypanel type: KP 32 CLD (4, 6 and 8 character alpha versions).
FIX: Reduced number of retries on NAK.
FIX: Saved window position now handles multiple monitors.
FIX: Saved window position now properly handles maximized state.
FIX: Refactoring to remove unused and/or obsolete code.
FIX: Added hot-key for GPIO-16 (Ctrl+F6).
FIX: UPL edit dialog layout could clip some text.
FIX: Updated help ID's.
FIX: Context menus for LCP-102, ARP-32, PAP-32 could have trailing menu separator.
AZedit V3.4.0
NEW: Added support for PGM Listen Source.
NEW: Moved IFB Listen Source on to IFB view.
FIX: Don't enable Changes on context menu unless something is changed.
FIX: Improvements to list of restricted items in setup files.
FIX: Port alphas for RVON ports didn't update when changing cards on RVON dialog.
FIX: GPIO-16 version view had duplicate help ID.
FIX: Log configuration dialog did not have context help.
FIX: Log configuration dialog did not remember size and position.
FIX: SERVER mode log viewing could not find log files.
AZedit V3.3.0
NEW: Support for GPIO-16
NEW: Support for configuring which AZedit session receives log messages
FIX: Speed up alpha upload over network connections with large round-trip delays
FIX: GPI Input edit dialog showed description for ISO not GPI Input.
FIX: Did not read intercom configuration section from setup file properly.
FIX: Communications dialog did not remember it's screen position.
FIX: Alphas or Intercom Names with '&' characters didn't display properly on some screens.
AZedit V3.2.2
NEW: Support for configuring ARP-32s from AZedit
NEW: Recognize ARP-32 panels on PAP/LCP Status View
NEW: Ported development environment to Visual Studio 2005 from Visual Studio 2003
NEW: Intercom Configuration allows modification of ports in each frame
NEW: All new Help file
NEW: New installation package alllows for side-by-side installation of different versions
FIX: RKP-4 keypanel template showed wrong assignment for CWW key
FIX: Don't search remote alphas when entering alphas on PAP or LCP views
FIX: Small fixes to PAP/LCP/ARP number and description combo boxes
FIX: Key assignment grid didn't change to match alpha size on Assignment Group view
FIX: Help ID's for Select Icom and Select User dialogs were the same
FIX: Help ID's for Change Assignment and Search Assignment dialogs were the same
FIX: Key restricts on PAP view had individual help ID's instead of one group ID each for PGM and IFB types
FIX: Paging macro UPL statements could contain invalid data
FIX: Don't allow Set Key State if access to port is restricted
AZedit V3.1.1 (J6) Unicode
NEW: Updated Japanese resource DLL
FIX: Unicode IFB SL and AGRP alphas and aliases were not uploaded correctly from the intercom
FIX: Blank Unicode descriptions default to wide spaces not narrow spaces
FIX: Two English resource strings had been corrupted (fixed before translation to Japanese)
AZedit V3.1.1
NEW: Support for UPL paging system macro output actions
NEW: Changes to hot-key shortcuts for navigation
NEW: Preference to show list of changes during Send Changes
NEW: Preference to prompt when a duplicate alpha is created
NEW: Preference to prompt to enter FILE mode during ONLINE Save.
NEW: Alpha sort preference determines whether resource # or alpha gets default focus on navigation (or CTRL+HOME)
NEW: Allow Paste Special in ONLINE mode for scroll restrictions (i.e PL, SL, IFB, etc...)
NEW: Paste Special for scroll restricts now shows resource alphas in target list.
NEW: Added UPL comment column to UPL Statement view
FIX: Don't load PAP and/or IO card descriptions if not capable.
FIX: Failed loading setup files with PAP and IO descriptions if the intercom size was different
FIX: Allow key label changes if user has permission to edit talk key assignments.
FIX: When more than one assignment matches an entered assignment, use correct alpha size when displaying pick list.
FIX: Warn when attempting to resize intercom with fewer ports than "Ports with Key Labels"
FIX: Some static controls displayed (incorrectly) in pink when in SERVER mode
FIX: Could not download RVON-C cards in Cronus slave frames
FIX: AZedit could GPF when switching connection from 1-frame to 7-frame intercom
FIX: Wrong keys/ports selected on Paste Special dialog if lists were sorted by alpha (or reverse numeric order)
FIX: Wrong items selected on Alpha Copy dialog if list was sorted by alpha (or reverse numeric order)
FIX: Paste Special for scroll restricts did not respect restrictions for target resources.
FIX: Changing user warned that changes would be lost, but then didn't clear the change flags.
FIX: Changes to "Allow key state change" preference not remembered when changing preference pages.
FIX: Don't allow user to save directories from File dialogs if corresponding preference page is restricted.
FIX: Don't allow changing logging directory if logging preferences page is restricted.
FIX: Changes to default directories on preference pages were allowed even if the page was restricted.
FIX: Changes to default directories on preference pages didn't activate the Apply button.
FIX: Didn't intercept help API to popup help IDs for Views (only dialogs)
FIX: Enabled context help generation on all views and dialogs
AZedit V3.1.0
NEW: Configure SNMP settings for capable MC/PC cards.
NEW: Support for PAP/LCP and IO Card descriptions.
NEW: Support for RVON-C cards in Cronus.
NEW: Warn when attempting to add/delete intercoms/users when restrictions file is present.
NEW: Support for more (and skipped) expansion panels on KP-812K.
NEW: Allow LOCL as intercom name even if configured for a real name (intercom may not be talking to TM).
NEW: Hide references to "High Density" when talking to single frame intercom.
FIX: Clear all changes didn't clear DIM and DIM description changes.
FIX: Might not re-upload alphas after re-connect or detection of configuration change.
FIX: Might continue to detect changes in configuration when going ONLINE or back to FILE mode.
FIX: Only show Download Firmware context menu item if it is actually allowed for selected device(s).
FIX: Directory name edit boxes did not behave properly with ENTER and ESC.
FIX: Ethernet Setup dialog did not resize properly switching from Cronus to non-Cronus intercom.
FIX: Don't include IFB Listen Destination in Paste or Paste Special (unless explicitly included).
FIX: Memory view address and display were out of sync switching between Cronus AIO and other devices.
FIX: Sometimes the preferred alpha size would show as blank.
FIX: Drop-down combo boxes changed selection during refresh on RVON status view.
AZedit V3.0.4
NEW: Added admin hot-key for accessing user preferences if restricted
NEW: Support for separate restrictions for editing Input and Output alphas
NEW: Support for restrictions in Unicode builds
NEW: Copy initial user preferences from Default intercom/user
FIX: Don't allow illegal characters in intercom or user names
FIX: Re-load of restrictions file would forget user name
FIX: Don't allow authentication enabling on J9 and J10 sessions for Cronus intercoms
FIX: Don't allow authentication enabling on Ethernet sessions for intercoms without Ethernet support
FIX: Startup process could GPF if warning/error message displayed for too long
FIX: Don't restrict status bar updates
FIX: Key label support in Unicode builds was broken
FIX: Found more strings to move to resource file.
FIX: Replaced more char buffers with Strings
FIX: Don't close application when closing the Print Preview frame
FIX: Rebuild current view when changing intercom/user or re-loading restrictions
FIX: Performance optimizations and refactoring
AZedit V3.0.2
NEW: Allow AZedit to set IP address of standby controller via Ethernet connection.
NEW: Merged latest English resources into Japanese resource file.
NEW: Allow specification of runtime locale via command line argument (i.e. AZedit.exe -L 1041).
FIX: Option to hide maintenance preferences had inverted sense.
FIX: AZedit did not update which card to swap to on a transfer of control.
FIX: Periodically query which MC is active so Ethernet settings are displayed correctly.
FIX: Don't allow VOX changes if VOX not supported. (i.e. copy KP, paste KP)
FIX: Adjusted Alpha dialog control layout to fit text labels better.
FIX: Group Call view dialog template had border and non-virtual list control.
FIX: Found more strings to move to resource file.
FIX: Replaced narrow versions of some more routines with generic equivalents.
FIX: Fixed problem with display of key labels in Unicode (and ASCII) mode.
FIX: Fixed IME data entry problems on key assignment controls.
FIX: Fixed problem with parsing intercom broadcast in Unicode mode.
AZedit V3.0.1
FIX: Command line arguments for intercom and user name can now contain embedded spaces (if names enclosed in quotation marks)
FIX: Trim leading and trailing blanks from intercom and user names for authentication/restriction purposes
FIX: Limit intercom names to 4 characters for authentication/restriction purposes
FIX: Limit user names to 24 characters for authentication/restriction purposes
FIX: Set directory paths to the canonical form (eliminating .. references)
FIX: Application could GPF if last user or intercom name deleted
FIX: Don't allow illegal characters in shortcut filename
FIX: Don't allow empty shortcut names
FIX: Enclose intercom and user name in quotation marks when creating shortcut command line arguments
FIX: Shortcut names containing a period/dot did not get saved with the correct name
FIX: Remove Vox menu item if intercom not capable of support
FIX: Editing directories in preferences dialog was allowed even if the dialog was restricted
FIX: Authentication and Maintenance preference pages did not have restrictions applied via ResEdit
AZedit V3.0.0
NEW: Added support for Authentication (change intercom, change user, login, administration, etc...)
NEW: Added ability to show list of connected users
NEW Added ability to create desktop shortcut for intercom/user via AZedit
NEW: Prompt for intercom and user name at startup if not specified and more than one selection available.
NEW: Added support for restrictions repository with local cache.
NEW: Reorganized registry, created new AZeditV3 tree, removed some obsolete entries
NEW: Moved user profiles beneath intercom profiles
NEW: Moved some per-intercom settings to per-user settings
NEW: Save intercom configuration and capabilities in setup file
NEW: Prompt before migrating registry settings from older versions
NEW: Added directory configuration to Options | Preferences pages
NEW: Enforce intercom name matches AZedit intercom profile name
NEW: Added keypanel template for RKP-4
FIX: Toolbar context menu did not respect menu restrictions
FIX: Don't count error if NAK received on version request, memory request, or DBX link request
FIX: Don't allow logging menu items on sessions that don't support logging
FIX: Added SHIFT+F11 hot key for VOX view
FIX: Could not properly resize Cronus with Key Labels
FIX: Cancel splash screen before showing another dialog
FIX "Don't Ask Again" option not respected when intercom sized change detected.
FIX: Remove menu items if intercom not capable of support (i.e. Cronus Password, etc...)
FIX: Ensure menu doesn't have any double separators or separators at bottom of menu.
FIX: UNICODE build did not request UNICODE Key Labels.
FIX: Restrictions file parser had 255 character line length limit.
FIX: More refactoring, consolidating similar functions, removing obsolete code
AZedit V2.09.00
NEW: Added support for VOX with AIO-16 and Cronus
NEW: Added support for Cronus front panel control password
NEW: Added support for UPL test for any talk key pressed on a keypanel
NEW: Added support for showing RVON pass-through serial communication statistics
NEW: Added support for templates for English versions of the Kanji keypanel
NEW: Added support for clearing RVON channel statistics.
NEW: Don't require restrictions file to be present when -i option is specified.
FIX: Communications would hang if no response to release exclusive control message
FIX: AZedit might not detect MC download buffer busy in large intercoms
FIX: Changed more references to Analog I/O Gains to simply I/O Gains
FIX: Reduced flicker when updating some views in ONLINE mode
FIX: Print header for Trim and IFB Priority views was incorrect
FIX: Context menu on Trim view had many problems
FIX: Could still mark cards as BX cards when changing communication to different intercom
FIX: Possible memory leak when loading key labels from file (if duplicate keys present)
FIX: Don't show Group and Auto-Dial toolbar buttons in non-Japanese builds
FIX: Was missing crosspoint inspection results for DNI
FIX: Some menu items and toolbar buttons were not disabled when they should have been
FIX: Removed many unused bitmaps, icons, and other resources
FIX: Fixed tab order on some dialogs
FIX: Re-organized some registry access to avoid potential problems
FIX: Early check for preferred alpha size looked in AZedit.INI instead of registry
FIX: Early exit (two sessions with same intercom name) could cause registry updates in wrong location.
FIX: Some toolbar buttons did not respect menu restrictions.
FIX: Some toolbar buttons did not disable themselves when all sub-menus were already disabled.
AZedit V2.08.01
NEW: Added support for key assignment Search and Replace
NEW: Added support for Key Labels
NEW: Added support for configuring PAP-32s via AZedit
NEW: Added support for customizable toolbars
NEW: Added support for intercoms with AIO-16 capability
NEW: Added support for Snoop Tally intercom configuration option
NEW: Added support for Do Not Interrupt keypanel configuration option
NEW: Added support for Master Controller IIe (and Ethernet connections to it)
NEW: Added support for clearing Trunk Port status for ports when TM disconnected
NEW: Added Intercom Resizing Wizard to simplify system configuration
NEW: Added drag-select, and block copy/paste of keypanel assignments
NEW: Change how Keypanel Local GPIO status is shown to accommodate up to 16 GPIO per port
NEW: Display download complete message and auto-dismiss download dialog on success
NEW: Paste Special allows pasting to multiple ports even in ONLINE mode
NEW: Show absolute key numbers on keypanel view (to correlate with UPL key number references)
NEW: Change default values for "Make Default" options on resizing warnings to reflect most common options
NEW: Show panel info on port alpha and keypanel version context menus
NEW: Added support for context sensitive navigation from LCP and PAP views
NEW: Allow CTRL+F12 alpha editing on PAP and LCP views
NEW: Added Copy and Paste to default context menu
NEW: Allow Copy from Debug Terminal and Memory Peek views
NEW: Removed support for Lookup Alphas (deprecated)
NEW: Removed support for IFB Tone Override Input (deprecated)
NEW: Show both port number and alpha in many places where only one or the other was shown previously.
NEW: Support auto hide/show of key assignment grid on appropriate views
NEW: Added support for TIF-4000 keypanel type
FIX: Keypanel view refresh was paused while alphas were uploading
FIX: Key assignment search would fail (not get sent) if alphas were uploading
FIX: Key assignment select dialog allowed restricted assignments on LCP and PAP views
FIX: Text on several dialogs did not fit in the allocated space
FIX: Intercom re-configuration wouldn't work if you did not visit the resource page
FIX: Did not handle intercom configurations with more than 999 of a particular resource type
FIX: Context menu for key assignment grid was incomplete if launched from the title bar
FIX: Context menu for key assignments did not show PL volume if applicable
FIX: Don't create empty sub-menus on context menus
FIX: LCP-102 view did not vertically center its layout as other views did
FIX: PAM template in 6 or 8 character alpha mode show 4 character null assignments on disabled keys
FIX: AZedit could GPF on keypanel view if no key assignment currently highlighted for keypanel edit hotkeys
FIX: Small memory leak if launching AZedit while another identical session already running
FIX: Memory leak on status view if number of list columns changes during resizing
FIX: Potential memory leak when viewing list of items to send to intercom
FIX: Did not release exclusive control if attempting firmware download while MC not ready for next download
FIX: Don't show function type in key assignment grid list of types if there are no instances of that type
FIX: Key assignment selection dialog could show wrong alpha size
FIX: PAP and LCP combo boxes did not hunt when text typed
FIX: Don't show alias fields for function types that do not have aliases
FIX: IFB Special Lists should be non-scrollable by default
FIX: Application was not completely read-only when in SERVER mode
FIX: Partial save advanced select operations did not work correctly in all modes
FIX: V2.07.xx treated NAK as error on BX Link Status and Device Version requests (but OK if device no present)
FIX: Longer timeouts for some messages did not get applied if the message was re-transmitted
FIX: Don't assume number of ports is greater than number of IO, LCP, and/or UIO devices
FIX: Splash screen could cover COM port error message at start up
FIX: Automatically allowed Paste Special if Paste was allowed
FIX: Alpha edit dialog displayed incorrectly for V9.15.x intercoms
FIX: Only show stacked drag-drop cursor when more than one level will be moved
FIX: Minor bug in drag-drop when dragging talk level 2 on key number 1
FIX: Added context help icon to many dialogs where it was missing
FIX: Enabled close dialog icon on many dialogs where it was disabled
FIX: Warn if file contains Unicode alphas but current intercom does not support them
FIX: Don't show Unicode keypanel types in non-Unicode builds
FIX: Don't save Unicode alphas or descriptions to file if current intercom does not support them
FIX: Setup files saved with Unicode version could include Japanese header text
FIX: Could attempt to send Unicode aliases even if intercom did not support them
FIX: Non-Unicode build didn't handle an attached KP-812K (Kanji) keypanel very nicely
FIX: Sometimes registry entries could get saved to the wrong tree
FIX: Found some constant strings that should have been localizable resources
FIX: Removed some obsolete code, registry settings, re-organized and optimized in other places
FIX: Updated standard list of default capabilities to reflect current intercoms
FIX: Made reset capabilities restore default capabilities without taking any away
AZedit V2.07.02
FIX: V2.07.01 broke display of key assignment grid (font would not be sized correctly, and could not be changed).
FIX: V2.07.00 treated NAK as error on memory request (but OK if device not present).
FIX: Don't send assignment group definition if no additions or deletions were made.
AZedit V2.07.01
FIX: AZedit slowly leaked resources when left ONLINE on an alpha screen.
FIX: AZedit could not load firmware images for download from a CD-ROM drive.
FIX: AZedit might not update the Port description when changing ports on the Crosspoint Status, Port Volume, or PL Volume screens.
FIX: AZedit could incorrectly calculate the percentage of RAM/FLASH used when resizing very large systems.
AZedit V2.07.00
NEW: Added support for IFB Special Lists
NEW: Added support for Assignment Groups
NEW: Added support for Panel Party Line special functions
NEW: Show and Hide List Columns
NEW: Optimizations intended to better support multiple AZedit sessions on one intercom
NEW: Added support for pausing refresh when application minimized
NEW: Added support for pausing refresh when application loses focus (must enable)
NEW: Added support for pausing refresh after X minutes of inactivity (must enable)
NEW: Added support for manually pausing refresh by pressing PAUSE key
NEW: Added more (missing) context menu navigation options
NEW: Wait 10ms after NAK before retrying
NEW: Increase retries from 3 to 50 after a NAK
NEW: Break sending of volumes into multiple smaller messages
NEW: Break sending of poll delays into multiple smaller messages
NEW: Ask for, and send, fewer alphas, descriptions, trims and others per message
FIX: Would not retry sending change after a NAK (message was skipped)
FIX: Did not flash red LED when NAK received
FIX: Don't compare message numbers if NAK bit set (number may be invalid)
FIX: Addition of send hot link license caused set key state to GPF
FIX: Did not handle length of capability bitmap smaller than expected
FIX: (maybe) Sometimes preferred alpha size was 0?
FIX: Context menu for inverting memberships caused GPF (PL/SL/GRP/DIM)
FIX: Did not check AT capability when determining AT restriction
FIX: Don't allow AT assignment if intercom not capable
FIX: Hide AT on key assignment grid and selection list if not capable
FIX: List controls did not support refreshing dynamic number of entries
FIX: Was using Edit instead of Assign restrictions for membership
FIX: Did not upload remote UPL Resource alphas
FIX: Tried to upload intercom alphas for types AZedit did not support
FIX: Did not show input alphas on listen keys in KP-32 template mode
FIX: Did not handle multiple monitors correctly for context menus
FIX: Was checking wrong restriction when sending Port Is TIF settings
FIX: Trim volumes displayed with garbage character if restricted
FIX: Display formatting problem for UPL output action set IFB output
FIX: Cosmetic improvement to context menus (trim trailing whitespace from alphas)
AZedit V2.06.07
NEW: Support for downloading license files to Cronus intercoms (Cronus version v0.1.0 or later).
NEW: Support for LCPs and PAPs in slave frames of DBX systems.
NEW: Support for separate options for reducing TIF, Trunk, and PL tallies.
NEW: Support for Chinese locales with appropriate resource DLLs.
NEW: Support for RVON-1 and VKP.
NEW: Support browsing for Ethernet capable intercoms.
FIX: Sometimes clearing errors for ALL ports would only operate on selected ports.
FIX: Added status bar menu prompts for several menu items for which this was missing.
FIX: Allow selection of multiple DBX cards for downloading on the DBX links view.
FIX: Did not update DIM description when changing DIMs in FILE mode.
FIX: Downloading multiple RVON cards could sometimes end with no way to exit download dialog.
FIX: Could cause GPF if viewing split PAM-32 panels in template mode.
FIX: Do no show RVON codec information if the channel is not connected (data is invalid).
AZedit V2.06.06
NEW: Support for Ethernet communications with Cronus intercoms
NEW: Bundling of Cronus USB driver with AZedit installation
NEW: Initial support for RVON-1, including firmware download from the keypanel status view
FIX: AZedit could hang if forced to re-transmit a message containing an embedded end-of-message token
FIX: Japanese UNICODE build did not correctly process UNICODE matrix names
FIX: Discard queued alpha counter requests when changing intercom size or capabilities
FIX: Don't show Download Firmware context menu item for Cronus Crosspoint Controller or for PAP/LCP-102
FIX: Don't show UNICODE alphas consisting of only ASCII characters as a single row of narrow characters
FIX: AZedit could GPF when trying to set key state for panel not supporting that operation and warning preference enabled
FIX: AZedit attempted to request card type information from intercoms that did not support this request
FIX: Periodically request updated list of trunk ports (to prevent editing of RVON configuration for trunk ports)
FIX: Editing UPL date/time statements could fail if computer time zone was east of GMT (e.g. Japan)
FIX: Some strings did not display correctly in Japanese UNICODE builds
AZedit V2.06.05
NEW: RVON card configuration shows channels (and card) as read only if the channel is a trunk port.
NEW: RVON card configuration shows all settings as read only if changes via AZEdit are locked out (DIP 1).
NEW: RVON connection status shows mismatch in codec type, packet size, and VAD settings in red.
NEW: Has keypanel template support for a host of new PAM keypanels.
NEW: USB connection support for Cronus intercoms. (requires Cronus USB driver).
NEW: Automatically dismisses AZedit reconnected dialog after 10 seconds (counts disconnects on status dialog).
NEW: Now uses AZedit sub-tree in registry (copying existing settings from ADAMedit sub-tree if it exists).
NEW: About AZedit dialog now shows feature set, build type, system locale, and resource DLL name and version.
FIX: Firmware download to RVON cards no longer continues to show Abort when Done.
FIX: Periodically upload card type and RVON configuration information in the background.
FIX: Didn't discard old RVON configuration and status information if intercom changed or was resized.
FIX: Don't show RVON context menu items for cards that are not RVON cards.
FIX: Allow RVON context menu items on version screen.
FIX: RVON card configuration combo box did not sort correctly.
FIX: Logging in UNICODE builds did not work correctly.
FIX: Return to display font from pre-V2.06.04 versions to fix screen layout problems.
FIX: UNICODE versions failed to write UPL Resource descriptions to file.
FIX: Japanese UNICODE build treated Auto Dial numbers as UNICODE, but they are ASCII.
FIX: Japanese builds had set Groups as scrollable after File New.
FIX: Description view for DIM and GPI Inputs showed alphas even though they don't have any.
FIX: Key assignment grid did not always refresh properly.
FIX: Possible buffer overflow in description of UPL statements.
AZedit V2.06.04
NEW: Can be compiled in Unicode or ASCII builds, with English or Japanese feature set
NEW: User interface resources can now be compiled into an external DLL for translation to any language.
NEW: AZedit looks for resource DLL matching the current computer system locale to select user interface language.
NEW: Support for Kanji intercoms and keypanels (in Unicode builds only), including new alpha size of 8 Unicode characters
NEW: Keypanel template support for Kanji keypanels and expansion panels (in Unicode builds only)
NEW: Support for RVON-8 cards, including configuration and connection status
NEW: Support for Cronus intercoms (including crosspoint controller status)
NEW: Support for Debug Terminal window
NEW: Displays card type on I/O Status screen for cards that are capable of reporting their type to the intercom
NEW: Don't allow firmware download to different card types simultaneously
NEW: Logging uses the preferred alpha size if supported by the intercom
NEW: Showing Analog Gains on Volume Select Dialog is now a preference (in Japanese builds only)
NEW: AZedit updates intercom date/time every 5 minutes (to allow log file date/time stamps to stay in sync)
FIX: Validate length on processing ID response avoids "intercom resized" messages when communication drops NULL bytes but leaves valid checksum
FIX: Validate message number even on ID requests avoids misinterpretation of received data if messages get out of sync
FIX: Code re-factoring (remove obsolete code and resources, add compiler verify for static table lengths, make initialized tables constant, etc...)
FIX: Don't process memory request body if intercom responded with NAK (card not present)
FIX: Allow changing of log mode and collect log messages even in FILE mode
FIX: Allow long file name support even on Windows 95 (which has it, but didn't support it in KERNEL32.DLL)
FIX: Some context menus allow changes to be made even in SERVER mode
FIX: Possible memory leak performing drag and drop operations on keypanel view
FIX: Talking intercoms and Trunk Inspect views did not update if matrix names or alphas were changed
FIX: Force number of CWW to 1 in English builds
FIX: Key assignment grid did not update when changing modes in LCP-102 view
FIX: Key assignment grid used wrong font
FIX: Undoing an alpha change did not always refresh the current view
FIX: SERVER mode log view did not update when SERVER events occurred
FIX: Log view now remembers last log type viewed when leaving view and returning
AZedit V2.06.02
FIX: Drag and drop move AC or DIM to incorrect key location will no longer remove the original assignment.
FIX: Shift insert now supports move and copy operations (hold CTRL to copy keys.) Default shift operation is now move.
AZedit V2.06.01
NEW: Supports "Leave Listen Active", where listen keys that are on, stay on when you change setup pages (a per setup page option). Supported in Japanese version only.
NEW: Supports enhanced special lists (unique port membership enforced). Similar to Group operation. Supported in Japanese version only.
FIX: Remove DIM from Talk Level 2 if Talk Level 1 is changed to something other than a PP or SL (with enhanced SLs).
FIX: Changing the item alpha on item views now works as expected.
FIX: Log viewer now shows more than just the first 256 entries of a log file
FIX: When talking to ZEUS, the Status | PAP and LCP-102 menu item could become permanently disabled
FIX: Drag and drop shift-insert now carries entire key data.
AZedit V2.06.00
NEW: Supports input alphas in 4, 6, and 8 character versions (now also supported in MC V9.17.0).
FIX: Now better performance from alpha counters.
AZedit V2.05.02
FIX: New installation script did not create LOG, FIRMWARE and SETUPS directories
AZedit V2.05.01
NEW: Supports proper keypanel designation strip height and center-center key spacing for ZEUS family keypanels (BKP-4, et al).
FIX: Keypanel print/print preview crashes under some conditions when suppress default alphas option is engaged.
FIX: Remove TKP-8 (doesn't exist) and add TKP-4 keypanel type
FIX: Firmware download from DBX Links view could GPF when attempting to open firmware file.
FIX: Didn't handle differences in unity trim values between ADAM and ZEUS intercoms
FIX: Removed ZEUS builds and conditional code.
AZedit V2.05.00
NEW: UPL control of IFB Program Input support
NEW: Preference allows the offline storing and re-setting of advanced communications parameters to the intercom, even if the intercom is resized or first birthdayed between sessions.
NEW: Volumes display on keypanel view shows changed and restricted status of the volumes.
NEW: Column sizes no longer resize dynamically with the view.
FIX: Print/print preview would not differentiate between items with or without scroll restrictions.
FIX: LCP-102 view would show heartbeat(alive) icon for PAP-32 panels.
FIX: When AL, AR, AM are on listen keys, toggled volume display on keypanel view should show volumes
FIX: Print options dialog doesn't suppress default alphas when that option is enabled
FIX: Matrix alphas no longer show up on duplicate alpha resolution popup
FIX: AIO/UIO/PAP status views now show error counter information