Contents
--------

The following components can be downloaded via AZedit:

  - KP-Series-boot_v1.3.1.mot    - Boot loader firmware
  - KP-Series-RVON_z_v1.3.2R.mot - Client firmware (see *NOTE*)

The following components can be downloaded to the keypanel via the FWUT:

  - KP-Series_v1.3.2-RVON.capfw								- Client firmware (see *NOTE*)
  - KP-Series_v1.3.2-RVON_uBlaze-v4.30.4849.capfw			- uBlaze FPGA image + client firmware
  - KP-Series_v1.3.2-RVON_uBlaze_NoRSTP-v4.30.4849.capfw	- As above, but without RSTP support

*NOTE*

Do not download the client firmware image to a keypanel unless it is already
running KP-Series-RVON firmware.

If a panel is currently running OMNEO firmware, to convert it to RVON, you
*must* use the FWUT (Firmware Upload Tool) to download the uBlaze+client image.