KP-Series Keypanel Boot Loader
==============================

New in version 1.3.1 (CRC = ec60)
--------------------

* Version string now uses "PB" instead of "P" to identify Push Button panels
  (e.g. "KP-5032PB").


New in version 1.3.0 (CRC = 1a7e)
--------------------

* Added support for DKP-3016 and Push Button keypanels

  One version of firmware works across the board for all KP-Series keypanels.


New in version 1.2.3 (CRC = 29c2)
--------------------

* Fixed audio distortion problem

  In some instances, a panel reset (such as after downloading new firmware)
  could result in audio distortion. The distortion would only ever affect
  audio from the front or rear panel mics - it would not affect audio from
  a headset mic. (Cycling the power to the panel would always correct any
  audio problems.) Fixed.


New in version 1.2.0 (CRC = 567e)
--------------------

* Support "soft resets"

  If the client code reboots after a firmware download or a configuration
  change (e.g. changing the displayed alpha size), it will now perform a
  "soft reset". When a soft reset occurs, the internal Ethernet switch (which
  the optical and RJ-45 ports connect to) is not reset. Thus, if there are
  any downstream Ethernet devices daisy-chained through the keypanel,
  Ethernet communications for those devices is not disrupted.

* Fixed FWUT download issues

  Trying to update the keypanel firmware via the FWUT would sometimes fail,
  in one of two ways: The download would never start, or the keypanel would
  fail to reboot once the download was complete. Fixed.


New in version 1.1.0 (CRC = 2337)
--------------------

* Fixed handling of fail-safe active signal from Audinate FPGA


New in version 1.0.2 (CRC = 0c50)
--------------------

* Initial release