______________________

ODIN Intercom Firmware
______________________

These are the release notes for the firmware for the ODIN intercom.

The firmware consists of the following files:

  - ODIN-Firmware.mot      - Downloadable from AZedit
  - ODIN-Firmware.capfw    - Downloadable from FWUT (Firmware Upload Tool)

The firmware files consists of several individual firmware components (e.g. Bootloader,
Main Application, FPGA). The versions of these individual firmware components can be
viewed in the front panel menu under Status | System | ODIN Versions and also in AZedit
under Status | ODIN Hardware | Component Versions.

The firmware can be updated with AZedit or the FWUT, with one exception. The Audio FPGA
is only included in the ODIN-Firmware.capfw file and must be downloaded using the FWUT.

The firmware files in this release include the following firmware components:

  - Main Application: 1.0.1
  - LEC Application:  1.0.0
  - Bootloader:       1.0.0
  - Main FPGA:        2.0.4
  - Audio FPGA:       5.40.5418 (ODIN-Firmware.capfw only)
  - FP Application:   1.0.1
  - FP FPGA:          0.3.0

______________

Change History
______________


Version 1.0.1
=============

* Fix: In some cases ODIN was unable to resolve the IP address of devices in a
  different subnet.

* Fix: In some cases OMNEO audio routes were not established when trying to
  establish multiple audio channels to one device.

* Fix: If an OMNEO device changed its IP address twice, ODIN would not detect
  the second change. Furthermore, once this occured, changing the Destination
  Device Name would cause ODIN to reset.

* Fix: When clearing or acknowledging many alarms consecutively in the front
  panel menu it possible to cause ODIN to reset.

  
Version 1.0.0
=============

* Initial release