_____________________

OMS Intercom Firmware
_____________________

These are the release notes for the firmware for the OMS intercom.

The firmware consists of the following files:

  - OMS-Firmware.mot      - Downloadable from AZedit
  - OMS-Firmware.capfw    - Downloadable from FWUT (Firmware Upload Tool)

The firmware files consist of several individual firmware components
(e.g. Bootloader, Main Application, FPGA). The versions of these individual
firmware components can be viewed in the front panel menu under
Status | System | OMS Versions and also in AZedit under
Status | OMS Hardware | Component Versions.

The firmware can be updated with AZedit or the FWUT, with one exception.
The Audio FPGA is only included in the OMS-Firmware.capfw file and must be
downloaded using the FWUT.

The firmware files in this release include the following firmware components:

  - Main Application:      1.1.0
  - LEC/RVON Application:  1.0.2
  - Bootloader:            1.0.0
  - Main FPGA:             2.5.2
  - Audio FPGA:            9.60.37117 (.capfw files only)


______________

Change History
______________


Version 1.1.0
=============

* Added support for ST-2110-30

  OMS now has native support for ST-2110-30. Previously, ST-2110-30 support
  required the use of Dante Domain Manager.

* Device mode can be configured from IPedit

  IPedit allows the device mode to be set to ST-2110-30, AES-67, or <none>.


Version 1.0.2
=============

* Added support for 3rd party Dante call light indicators on channels 1-4

* Improvements to the Connect Devices (Easy Connect) feature

* Fix: The TR-1800 did not tally a party line key assignment when the
  party line was called.

* Fix: In some cases, the 2-wire mode displayed in AZedit was incorrect.


Version 1.0.1
=============

* Initial release