Contents
--------

The following components can be downloaded via AZedit:

  - KP-Series_boot_v1.4.2.mot    - Boot loader firmware
  - KP-Series-RVON_z_v1.6.1R.mot - Client firmware (see *NOTE*)
  - KP-Series-FPGA_v7.0.2.mot    - FPGA image

The following components can be downloaded to the keypanel via the FWUT:

  - KP-Series_v1.6.1-RVON.capfw			     - Client firmware (see *NOTE*)
  - KP-Series_v1.6.1-RVON_uBlaze-v7.0.0.capfw	     - uBlaze FPGA image + client firmware
  - KP-Series_v1.6.1-RVON_uBlaze_NoRSTP-v7.0.0.capfw - As above, but without RSTP support
  - OKP_FPGA_v7.0.2.capfw                            - Intercom FPGA image

* NOTES *

Do not download the client firmware image to a keypanel unless it is already
running KP-Series-RVON firmware.

If a panel is currently running OMNEO firmware, to convert it to RVON, you
*must* use the FWUT (Firmware Upload Tool) to download the uBlaze+client image.

If updating to v1.6.0R or later, ensure the FPGA is updated first, before
updating the client and/or uBlaze firmware.