Here are the release notes for HDC4300 V1.50
 
 
[Description]
Updated version of the HDC4300 (V1.50) is released.
Upgrade it as necessary.
Upgrade the firmware and the PLD for each board by referring to the procedure below and upgrade the
peripheral unit as necessary by referring to the related technical memos.
■ Recommended software version
- BPU4000: V4.02
- BPU4500: V1.61
- HDCU4300: V1.40
- MSU-1000/1500, RCP-1500/1501/1530: V3.20
[Related technical memo]
- HDCM17-085 (RCP-1500/1501/1530)
- HDCM17-086 (MSU-1000/1500)
- HDCM17-089 (HDCU2000 Series)
- HDCM17-077 (BPU4000)
- HDCM17-078 (BPU4500)
[Change Point]
<Added functions>
1. Automatic output function of unit information for the installation of the option software to USB
media is supported.
It would be enable after ULMS (Upgrade and License Management Suite) site is supported.
2. WHITE CLIP function in HDR is supported.
3. The panel control of Follow Focus is supported.
4. 3G-SDI Level A is output from SDI 1 out.
<Changed function>
1. The resolutions of Zoom Link of VF Detail / Dynamic Focus / Kinetic Focus are changed to 5%
step.
2. VF DETAIL AREA is expanded to 10%.
3. Indication of DISP of the Follow Focus is changed from the direct indication of the lens data to the
indication of the range of 0-999
4. The error that the White is reset to 0 but CTEMP is not reset when the AUTO LEVEL is executed is
corrected.