BZR-20 version 3.10
	Routing Switcher Data Backup Software
	
	Copyright 2001-2008 Sony Corporation
	All Rights Reserved.

Index 

  1. About BZR-20
  2. Requirements
  	2.1. Software
  	2.2. Hardware
  	2.3. Supported devices
  3. Installation
  4. BZR-20 Start-ups and a help facility
  5. Trademark Information

-------------------------------------------------------------------------------
1. About BZR-20

BZR-20 is a setup data backup program for the Sony Routing Switcher System.
BZR-20 can be used for the following events. 

	- Sending setup data after the device exchange.
	- Sending setup data after the battery exchange.
	- Returning the setup of the remote control panel having changed during practice. 

-------------------------------------------------------------------------------
2. Requirements
BZR-20 can be used with an IBM PC/AT-compatible computer on which Microsoft 
Windows 2000 or Windows XP is installed.

2.1. Software
OS (Operating System): 
Windows 2000 Professional Edition
Windows XP Professional Edition

2.2. Hardware
CPU: 
Intel Pentium Processor or compatible processor from another manufacturer.
(Only a single-processor CPU)

CPU clock speed: 
Clock speed of 233 MHz or higher is recommended.

Main memory: 
128 MB or higher

Free space of the hard disk: 
10 MB or more

Serial interface: 
RS-232C / 38400 bps
The cable for RS-232C and a COM port of the computer are needed.
And a COM port needs to be connected to the primary by a cable. 

Network interface: 
Ethernet with the transmission rate of 10BASE-T or higher.
You need connect the Ethernet port of the computer and the primary station using 
a cross cable (only Single Primary Station System) or straight cable via the hub.

Display device: 
Resolution 800x600 pixels or higher.

Pointing device: 
Mouse or equivalent pointing device
* Limitation of Windows 2000 
An IntelliMouse pointing device cannot be used.

2.3. Supported devices:
RS-232C 
	HKSP-R80, BZR-IF810, BZR-IF820, BZR-IF830, IXS-6600/6700, HDS-X5800, HDS-X3700/X3600/X3400, DVS-128, BKPF-R70A, BZR-IF310
LAN 
	HKSP-R80, BZR-IF810, BZR-IF820, BZR-IF830, IXS-6600/6700, HDS-X5800, BKS-R6010


-------------------------------------------------------------------------------
3. Installation

1) If you have installed an old version of BZR-20, uninstall it.
   In addition, to erase BZR-20 completely, delete the folder in which an 
   executable file exists after uninstalling it. 
   
   (Reference)
   When installing with the default settings, each executable file is 
   in the following folders. 
   - BZR-20
       C:\Program Files\SONY_BP\BZR20V3
   The place installed by the default setting in the version of V3.10 
   or more is different from the version of V2.11 or less.

2) Copy all the distribution files to an empty floppy disk or temporary
   directory (for example C:\TEMP).

3) Run SETUP.EXE and follow the instruction given by it.

4) After the installation, the distribution files are no longer needed.
   You can delete them.

5) Installation is finished if BZR-20 dialog appears on the desktop, when BZR-20 can start up.

-------------------------------------------------------------------------------
4. BZR-20 Start-ups and a help facility

When BZR-20 starts up, BZR-20 dialog appears on the desktop.
To call a help facility, select the "Help(H)" menu of the BZR-20.

-------------------------------------------------------------------------------
5. Trademark Information

Microsoft and Windows are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or other countries.

-------------------------------------------------------------------------------
  Readme.txt / Copyright 2001-2008 Sony Corporation