Sony DVS 7000
Quick Set Guide
Programming VTR Control

1) Programming VTR control into DME 5 & DME 6 buttons in main delegation panel.
	1) Main Set up Menu
	2) #4 = Periph menu
	3) F9 = Panel Port menu
	Note: F3 - F5 keys are choices for DME 3&4 buttons, and F6 - F9 keys are
	 	choices for DME 5&6 buttons.
	4) F9 = VTR: Selects VTR as control for DME 5&6 buttons.
	5) F10 = Execute: Actually programs the buttons. (Note: During the programing
	 	sequence the switcher will reset like a power recycle).

2) Programming Orthogonal button for VTR control.
	1) Main Set up menu
	2) #5 = Operation menu
	3) F5 = Operate Mode menu
	4) F8 = Program button menu
	5) F2 = Program Button: While holding down F2; on the switcher panel choose
	 	the orthogonal button. (Note: The orthogonal button is in the track ball section of
	 	the switcher panel. Upper right hand portion of the panel).
	6) F8 = Function Select : Choose VTR option
	7) F6 = Select
Choosing the Orthogonal button in the track ball section now puts that section into VTR control mode...