############################################################################### # # MC-400 VERSION LOG FILE # ############################################################################### %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % BOARD DESCRIPTIONS % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % % The following part numbers are possibly supported by this software. % Specifics are provided below in the section for each individual release % % DESCRIPTION REV FILENAME % % MC2020 Video Reference Board % - Part Number 121088-0002 A % - Firmware Revision 2.00 Many (support for 525,625,1080i) % - Bootloader n/a % % MC2020 Control Processor Board % - Part Number 121090-0101 C % - Firmware Revision 2.00 Many (support for 525,625,1080i) % - Bootloader 2.7x mc2020blimage2.7x.bin % % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ############################################################################### # # RELEASE VERSION DOCUMENTATION # ############################################################################### ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 02-11-2021 # Why: Release 3.16.04#1 # ############################################################################### [VERSION:] MC400_3-16-04#1_02/10/2021_11-28-57 [FEATURES] 1. Enh Added support for MC402 platform in syslogs etc. [BUG FIXES] [NOTES] 1. MC400 software will be used to support both MC400 & MC402 2. MC-402 uses the base mc400 version/sw files and copies them to 402 variants during the SW & FW gen processes =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 05-07-2015 # Why: Release 3.16.03 # ############################################################################### [VER_SION:] MC400_3-16-03#3_05/07/2015_12-46-26 [FEATURES] 1. Added support for Logo Autoscale burn support. This allows users to select the logos scale factor when it is burned. Mimicks feature in MC4K. [BUG FIXES] [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 04-22-2015 # Why: Release 3.16.02 # ############################################################################### [VER_SION:] MC400_3-16-02#1_04/22/2015_08-38-27 [FEATURES] 1. Added support for Auto Key Mask feature from the MC4k that allows the user to prevent automation control of keyers. [BUG FIXES] [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 06-11-2013 # Why: 3.16-rc1 # ############################################################################### [VER_SION:] MC400_3-16-rc1#1_06/11/2013_09-31-31 [FEATURES] 1. Added support for 2nd Logo Generator [BUG FIXES] [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 06-15-2012 # Why: Release version 3.09 mc400 software with clips # ############################################################################### [VER_SION:] MC400_3-09#1_06/15/2012_12-42-14 [FEATURES] [BUG FIXES] 1. KEYER 1 PST keyer with keyresetMask set to not turn PST KEYER OFF would sometimes be turned off even though the panel showed the keyer was on. Fixed, look for keyResetMaskBug-01. [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 02-08-2012 # Why: Release 3.07.03 # ############################################################################### [VER_SION:] MC400_3-07-03#1_02/08/2012_11-31-27 [FEATURES] [BUG FIXES] [MISC CHANGES SUMMARY] 1. Flash Burn Changes for new intel flash parts. [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 08-03-2011 # Why: Release 3.07.02 # ############################################################################### [VER_SION:] MC400_3-07-02#1_08/03/2011_14-42-57 [FEATURES] [BUG FIXES] 1. Keyer reset mask set to 0E would also clear out Keyer 1 (sometimes) fixed. [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 07-24-2011 # Why: Release 3.07.01 # ############################################################################### [VER_SION:] MC400_3-07-01#1_07/24/2011_23-58-52 [FEATURES] [BUG FIXES] 1. Keyer in ADDITIVE MODE was broken. Key would be all washed out, fixed. [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 05-13-2011 # Why: Release 3.07 # ############################################################################### [VER_SION:] MC400_3-07#1_05/13/2011_08-17-35 [FEATURES] 1. Updates for compatability with MC4K systems and commands [BUG FIXES] 1. HDconfig:MACRO:ROUTER:DIRECT would not allow 0 for output, fixed [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 02-27-2010 # Why: Release 3.05 # ############################################################################### [VER_SION:] MC400_3-05#7_02/27/2010_11-48-02 [FEATURES] 1. Added support for new firmware with 720p Timecode runs too fast fixes, audio silent fixes (h/w reset of aes rx channels for router input) Univision line 9 fixes MP3 on individual xpoint selection (MP3 0, 1) in audio xpoint def [BUG FIXES] 1. Keyer commands triggered by macro @ same time as TAKE caused the take to not occur. Fixed (again). Issue was new, card was not handling clientPtr correctly and sending data to non-existant sockets [NOTES] 1. REQUIRES New Version of MCConfig application version 3.1#1 or later to support MP3 audio, EAS Iteration Control, select file for Ucon Import. =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 02-23-2010 # Why: Release 3.04 with router macro support feature # ############################################################################### [VER_SION:] MC400_3-04#1_02/23/2010_12-23-37 [FEATURES] 1. Router Macro Allows the user to config the system to activate macros when sources are either switched too or switched away from one of the 3 primary output busses. [ROUTER_SOURCE_MACRO_START] # # SOURCE8 # | ,BUS (PGM/PST/PVW) # | | ,ACTION (ON/OFF/BOTH) # | | | ,MACRO NUMBER # | | | , MACRO STATE (ON/OFF/BOTH) #-------,----,-----,---,----- UPN NET2,PGM ,BOTH , 1,BOTH PIPELINE,PGM ,ON , 2,ON PIPELINE,PGM ,OFF , 3,OFF [BUG FIXES] 1. Keyer commands triggered by macro @ same time as TAKE caused the take to not occur. Fixed. Issue was one of the keyer commands not parsed correctly caused TAKE start command to be ignored. [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 09-26-2009 # Why: Release 3.02 maintenance release # ############################################################################### [VER_SION:] MC400_3-02#1_09/26/2009_11-04-10 [FEATURES] 1. Removed 4k hack stuff for testing serial 2. Added Logo Bug message Log Messages 3. Fixed up crawl left side controls to smooth out crawls and make them all term @ 0 on left side. 4. New Macro Command support trans type/speed ID ,ACT ,AREA ,FCN ,VALUE ,STAT,TEXT8 #---,----,------------,------------,------------,----,-------- 1 , ,TRANS_SELECT,TRS_TYPE ,MIX , , 1 , ,TRANS_SELECT,TRS_TYPE ,VFADE , , 1 , ,TRANS_SELECT,TRS_TYPE ,CUTFADE , , 1 , ,TRANS_SELECT,TRS_TYPE ,FADECUT , , 1 , ,TRANS_SELECT,TRS_SPEED ,CUT , , 1 , ,TRANS_SELECT,TRS_SPEED ,FAST , , 1 , ,TRANS_SELECT,TRS_SPEED ,MIX , , 1 , ,TRANS_SELECT,TRS_SPEED ,SLOW , , [BUG FIXES] 1. 720 Logo Save position not saved correctly. Fixed. [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 02-20-2009 # Why: Release 3.00 # ############################################################################### [VER_SION:] MC400_3-00-RC1#1_02/20/2009_11-05-37 [FEATURES] 1. EASNET Interface to DASDEC machines implemented to allow customers to download alert audio over ETHERNET as a MP3 file. 2. Extension for NMS NAME changed from "_P" to "_CRD" 3. Added ability to perform machine control for VTR devices. This was probably an oversight in the design. See the MCP400version files for changes required there to support this. 4. New MCConfig GUI can now reset the device 5. NMS Interface moved over to support Tier 1/2 operations [BUG FIXES] 1. HDconfig would not correctly add the data from an old format file that didn't have the enabled fields for video standards, fixed. 2. Audio Mode Race fix moved over from 2020 3. fix for blanks in audio source mode fields [NOTES] =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 10-21-2008 # Why: Release 1.07-rc1 # ############################################################################### [VER_SION:] MC400_01-07_rc1#16_10/21/2008_12-05-06 [VER_SION:] MC400_01-07_rc1#1_10/08/2008_11-30-19 [FEATURES] 1. More compatability updates for HDconfig in MCP400 world. 2. Added MODEL Type to misc section of HDconfig [BUG FIXES] [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 08-02-2008 # Why: Release beta 1.06 rc4 MC400 Software # ############################################################################### [VER_SION:] MC400-BETA_01-06_rc4#1_08/03/2008_13-41-25 [FEATURES] 1. HDconfig DISPLAY operation modified to support display of SYSLOG NAME [BUG FIXES] [NOTES] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 07-16-2008 # Why: Release beta 1.06 rc3 MC400 Software # ############################################################################### [VER_SION:] MC400-BETA_01-06_rc3#1_07/16/2008_14-49-21 [FEATURES] 1. More compatability updates for HDconfig and MISC section items most for sage mode 2 support [BUG FIXES] [NOTES] ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 07-08-2008 # Why: Release beta 1.06 rc2 MC400 Software # ############################################################################### [VER_SION:] MC400-BETA_01-06_rc2#3_07/08/2008_15-31-21 [FEATURES] 1. HDconfig modified to be compatible with new MISC Section EAS items required in MCP-400\Chassis code. (length of item went from 25 to 50) [BUG FIXES] [NOTES] =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 07-05-2008 # Why: Release beta 1.06 rc1 MC400 Software # ############################################################################### [VER_SION:] MC400-BETA_01-06_rc1#1_07/05/2008_13-58-29 [VER_SION:] MC400-BETA_01-05_rc3#1_06/21/2008_20-33-46 [VER_SION:] MC400-BETA_01-05_rc3#1_06/21/2008_20-33-46 [FEATURES] 1. 06-24-2008 Implemented VU meters support for MCP-2020 control panels. DISABLE USING common.h RUN_METERS define [BUG FIXES] [NOTES] 1. 06-18-2008 Added more logging to PANEL:SCG400 module to log actual receipt of inbound CRAWL control messages. Enable with general debug controls. GENERAL CRAWL (ON/OFF) =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MCP-400 Master Control Chassis update to CVS # When: 05-21-2008 # Why: Release BETA 1.5 RC2 MC400 software # ############################################################################### [VER_SION:] MC400-BETA_01-05_RC2#1_06/11/2008_13-50-30 [FEATURES] 1. Added loggging controls for CRAWL Actions. GENERAL CRAWL (on/OFF) logs crawl controls and actions 2. Added debug control syslog options for PANEL EAS (ports,handler,hardware) GENERAL (crawl, timecode) [BUG FIXES] 1. HDconfig DEBUG section would not read out correctly as the present flag was being set incorrectly - FIXED 2. 720P crawl location for line 1 was too high. Moved to lower line so the crawl can be seen correctly in non-underscan mode. [NOTES] 1. Misc loggging cleanups to remove unecessary MAXTIME_PIPE messages =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 04-21-2008 # Why: Release BETA 1.4 MC400 software # ############################################################################### [VER_SION:] MC400-BETA_01-04_RC1#1_04/21/2008_13-20-02 [FEATURES] 1. Misc cleanups for crawl operations. - left limit @ 0 - immediate shutdown [BUG FIXES] 1. Audio RTR fixups MC400-BETA_01-04_RC1#2_................... 1. #2 moves line 1 in 720 mode down to a more acceptable place in the Display MC400-BETA_01-04_RC1#3_04/21/2008_17-29-44 1. #3 is a workaround for a misc char displayed on line 2 during crawls All SCG_PGM lines except 1 are turned off with the h/w control [NOTES] =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 03-11-2008 # Why: Release MC400-BETA_01-03_IN-PROC # ############################################################################### [VER_SION:] MC400-BETA_01-03_IN-PROC#1_03/11/2008_11-45-59 [FEATURES] [BUG FIXES] 1. SD Video Mode Audio from RTR input I was stomping on some of the fifo controls. fixed. ======================================================================= ####################################################################### ======================================================================= !!!! IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT !!!! YOU MUST LOAD new MC400 Firmware version mc400fw_2008-03-04_beta1-4_rc1 to completely fix the problem ======================================================================= ####################################################################### ======================================================================= [NOTES] =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 01-19-2008 # Why: Release MC400-BETA_01-02_RC1 # ############################################################################### [VER_SION:] MC400-BETA_01-02_rc1#631_01/19/2008_15-06-09 [FEATURES] 11-03-2007 1. configured video standards are the only ones displayed in the screen 2. Working on crawl generator (run cgTest /cr) 3. EAS now has separate button to control the LOCAL EAS operations which is no longer part of the squeeze control system. [BUG FIXES] [NOTES] =============================================================================== [MISC CHANGE SUMMARY] =============================================================================== ############################################################################### # # Who: Roger Thornblad # What: MC400 Master Control Chassis update to CVS # When: 10-27-2007 # Why: Release BETA 1.1_RC1 # Why: Release BETA 1.1_RC2 # Why: Release BETA 1.1_RC3 # Why: Release BETA 1.1_RC4 # Why: Release BETA 1.2_in-proc # ############################################################################### [VER_SION:] MC400-BETA_01-01_RC4#1892_10/27/2007_00-07-22 [FEATURES] 1. First release candidate of beta software the MC400 master control system 2. Added enhanced support for VIDEO STANDARD controls. Each standard now has individual outputs/ref/log_2_phy/button assignments Available in RC2 3. Changed to change PATTERN GEN to display BLACK rather than test pattern 4. Added debug2020 app to image, fixed minor bug with patgen color setup. [BUG FIXES] [NOTES] =============================================================================== =============================================================================== END OF FILE mc400version.txt ===============================================================================