Installing System Manager on the Server

First obtain an installation key for the software to be installed.
(See "Checking the Server MAC Address.")
To install System Manager on the server, proceed as follows.
  1. Log in as root.

    When GUI has not started, type "startx".

  2. Insert the CD-ROM holding the BZPS-8000 software into the computer's disc drive.

    After a few seconds, the CD-ROM icon appears on the computer desktop.

  3. Click the main menu icon (Red Hat) at the lower left of the screen, and select System Tools, Terminal.



    The terminal window opens.



  4. After the command prompt, enter "cd /mnt/cdrom", and press the Enter key.
    However, if the operating system of your computer is Red Hat Enterprise Linux ES4, enter "cd /media/cdrom", and press the Enter key.

    This changes to the CD-ROM directory.

  5. After the command prompt, enter "cd server", and press the Enter key.

    This changes to the server directory within the CD-ROM.

  6. After the command prompt, enter "./install_old.sh", and press the Enter key.

    • If you are installing the BZPS-8000 software for the first time, a Java License Agreement appears.

      To page through the document

      Press the space bar.
    • If you are upgrading the BZPS-8000 software, System Manager is installed. (The Java installation is skipped.)
      Skip to step 8.

  7. If you agree with the license terms, enter "yes", and press the Enter key.



    After the Java installation, System Manager is installed.

  8. Enter the installation key for the software to be installed (16 characters).

    To enter the installation key

    1. After the command prompt, enter "./install-key.sh nnnn" (nnnn: "8000", "8001" or "8002"), and press the Enter key.
    2. After "Install Key:" enter the following installation key, and press the Enter key.
      • In step i, if you entered "8000" for nnnn: the BZPS-8000 installation key
      • In step i, if you entered "8001" for nnnn: the BZPS-8001 installation key
      • In step i, if you entered "8002" for nnnn: the BZPS-8002 installation key



  9. Click the main menu icon (Red Hat) at the lower left of the screen, and select Log Out.



  10. Select Restart the computer.